Robern RC1636D4FP1 Specification

Robern
Brand
Robern
Model
RC1636D4FP1
Category
Flat panel wall mounts
Type
Specification

This manual is also suitable for

R
3
TM SERIES FLAT DOOR CABINET
Features
S Recess or surface mount
S Ideal for remodeling: features 1 (2.5 cm) flange to hide gaps,
paint lines or any wall imperfections
S Slow-close functionality
S 108-degree in-set adjustable hinge
S Clean interior due to “hidden” shelf adjustments and
off-set door hinge (patent pending)
S 3 Mirror construction: front of door, back of door and
inside of cabinet
S Low-profile laminated door design
S Thin door and off-set hinge allow for more storage
than any cabinet of similar size
S Anodized aluminum construction
S Can be installed as a left- or right-hand door swing
S Four adjustable, cantilever glass shelves
S 24 (61 cm) W x 36 (91.4 cm) H x 4-3/4 (12.1 cm) D
Codes/Standards Applicable
Specified model meets or exceeds the following:
S None applicable
Specified Model
Model Description
RC2436D4FB1 Beveled edge o
RC2436D4FP1 Plain edge o
Required Accessories - For Surface Mount Installations Only
RSMK36D4P Plain mirror side kit with mounting hardware o
Page 1 of 2
1176665-4-
A
USA: 1-800-877-2376
www.robern.com
RC2436D4FB1
ALSO RC2436D4FP1
R
3
TM SERIES FLAT DOOR CABINET
Technical Information
Roughing-in
opening
22 (55.9 cm) W x 34 (86.4 cm) H x
4 (10.2 cm) D
Door opening
angle
108
Installation Notes
Install this product according to the installation guide.
When determining the height of the mirrored cabinet, ensure
the mirrored door will clear all obstacles, such as a faucet. A
minimum distance of 1 (2.5 cm) is required.
Secure the screws (provided) to a stud to avoid possible
property and product damage. If this is not possible, anchors
(provided) must be inserted before installing the screws.
Recessed cabinets project 1 (2.5 cm) from wall.
Page 2 of 2
1176665-4-
A
R
3
TM SERIES FLAT DOOR CABINET
Product Diagram
36
(91.4 cm)
4-3/4
(12.1 cm)
33-7/8
(86 cm)
3-3/4
(9.5 cm)
4-1/2
(11.4 cm)
21-3/4 (55.2 cm)
24 (61 cm)
  • Page 1 1
  • Page 2 2

Robern RC1636D4FP1 Specification

Robern
Brand
Robern
Model
RC1636D4FP1
Category
Flat panel wall mounts
Type
Specification
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents