Shakespeare Electronic Style 393 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Shakespeare Electronic Style 393 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Shakespeare Electronic Products Group
U.S. Operations: 6111 Shakespeare Rd. · Columbia, SC 29223 · 803-227-1590 · Fax: 803-419-3099 · www.shakespeare-marine.com
U.K. Operations: Enterprise Way, Fleetwood, Lancashire, FY7 8RY, England · +44 (0) 1253 858787 · Fax: +44 (0) 1253-859595 · www.vtronix-antennas.com
Style 393
Thank you for purchasing a Shakespeare antenna product.
Shakespeare works hard to build reliability and durability into all of its
products for maximum customer satisfaction. Customer comments are
welcome. Before installing, please study the diagram and check parts
supplied against those listed.
IMPORTANT! Please read all instructions before installing.
The Style 393 is a 23’ (7 m) SSB whip antenna of 3 sections,
in order to conform to carton length limits of freight carriers. The
antenna’s conductors run full length. It has a side termination band,
and a base ferrule with standard 1”-14 threads. This antenna’s design
supports transmitter power up to 1 KW.
Tools required: Crescent wrench or 1/2” open-end
wrench.
Installation Instructions
Choose a mounting location that is as free as possible from
obstructions, and as far as possible from other antennas and other
strong sources of RF.
1. Thread the Tip section onto the Middle section’s upper ferrule,
including the lockwasher as shown in the diagram, and securely
tighten.
2. Apply a few drops of Loctite 242 Thread Locking Compound
(supplied) to the threads on the Base section’s ferrule. Thread the
assembly of the upper two sections (Tip and Middle) onto the Base
section’s ferrule, and tighten securely.
3. Mount the antenna to a bulkhead or deck using a Shakespeare Style
409-R or 410-R Mounting Kit (each sold separately). Follow the
instructions included with the mount you choose.
4. SSB antennas and transceivers require adequate grounding systems.
Follow the radio manufacturers instructions for connecting this
antenna to your SSB radio system.
©1994, 2003, 2006 Shakespeare Co. · Form I-393 J: rev. 04/21/2010
Supplied Parts
1 Base section antenna
assembly
1 Middle section
1 Tip section
1 3/8” Lockwasher
1 Tube Loctite 242
Thread Locking
Compound
Middle section
35-90-1105-00
Lockwasher
Tip section
3/8”-24
threads
Termination
band
Apply Loctite 242
to threads
Base section
Shakespeare is a subsidiary of Jarden Corporation (NYSE: JAH)
/