•Fitting: Stee Polished brass with Opal glass tubes.
•Lamptype:
CH135: Excluding 6 x E14 maximum 60W candles 230V.
P246: Excluding 1 x E14 maximum 60W candle230V.
•Voltage: 220V - 240V ~ 50Hz.
•Protectionagainstelectricshock: Class 1.Requires earthing.
•IPRating: IP20. Dust Protected. Protected against solid foreign objects of 1.0mm Ø and greater.
Protected against splashing water.
•Commercial/domesticuse
•Notsuitableforoutdooruse.
•Notforuseinareasexposedtomoisture
•MaximumAmbienttemperaturerange: 20ºC - 40ºC
•Dimensions:
CH138: (H)610mm x (Ø)520mm
P246: (H)515mm x (Ø)300mm
•ChainLength:
CH138:380mm
P246: 350mm
•Beforeinstallationalwaysensurethepowersupplyisturnedoff.
•Thisluminaireisonlysuitableforxedmounting.
•Notforuseoutdoorsorinareasexposedtomoisture
•Fixthemountingbrackettotheceilingwiththewallanchorsandscrews.
•Testtoensurethemountingsurfacewillholdtheweightofthetting.
•Exposethesupplywiringfromtheceiling.
•Makeelectricalconnectionstopowersupplycircuit.
•Pleasetakecaretoconnectthewirescorrectlywithterminalblock.
•Attachallthewires(live,neutralandearth)oftheelectricitysupplycircuittotheterminalblock,
secure the wires to the terminal block with screws.
•Noloosestrandsorlooseconnectionsshouldbeallowed.
•Insertthelampintothelampholder.
•Fixtheglasstubes.
•Fixtheluminaireuptothemountingbracketbyhavingthetwoormorescrewedrodsstretching
outofthebracketinsertedintothetwoormoreholesofthexturecanopy,andtighteningupthe
decorative nuts provided from outside.
•Puttingthextureuptothehookofthebracket,slidingthecanopyalongthechainuptothe
ceilingendandfasteningthesidescrewrmly.
•Restorethepowersupplyandchecktheoperationofyourluminaire.
CH135&P246-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminaire
must not be used without the protection glass.
SPECIFICATIONS
IMPORTANTSAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Useasoftwhiteclothtocleantubes.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalrating.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerialsand/orsurfaces.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsof
this product whilst it is connected to the electricity supply.
•Itemmayvaryslightlyfromthepictureonthecarton.