partyrent com 1791 User manual

User manual 1791 Popcorn machine table model

Safety instructions:

• Do not place the device in the immediate vicinity of flammable objects.

• Place the device on a flat and horizontal surface.

• Never cover the entire device or the ventilation openings during use.

• Never leave the powered device turned on unattended.

• Make sure that the mains plug and all electrical components (if not designed for this purpose) do not

come into contact with water.

• Always have electrical installations commissioned by a specialist.

• Local regulations and standards must be observed during installation.

• Do not use devices with a damaged power cord.

• Never disconnect the mains connection by pulling the cable. So always grab the plug

to disconnect the mains connection.

• Some parts of the device may become hot during use.

• Only transport the device when it is switched off.

Switch on:

1. Place the device on a stable surface

2. Connect the device to the power source (16A, 230V).

3. Approx. ¾ coffee cup oil, 1 cup corn (suitable for popcorn machine) and (depending on taste) ½ cup

sugar or salt in the pan

4. Close the lid of the pan and the door of the appliance

5. Switch on the stirrer motor and heating element (the puffing process starts after a warm-up phase)

6. After the puffing process has been sworn in, remove the pan from the holder and empty the machine

(attention: risk of burns!). Repeat steps 3 – 5 as needed.

Switch off:

1. Switch off the heating element before the end of the last popping process to prevent the oil from

burning

2. Completely empty the pan and cooking compartment

3. Disconnect device from power source

Download PDF