Bresser 7000030 Owner's manual

Weather Station · Wetterstation ·

MeteoCast Pico

EN Instruction manual

DE Bedienungsanleitung

DE

Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere

Informationen zu diesem Produkt oder die verfügbaren Übersetzungen dieser Anleitung zu

nden.

GB

Visit our website via the following QR Code or web link to nd further information on this

product or the available translations of these instructions.

FR

Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode

d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le code QR ou le

lien correspondant.

NL

Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over

dit product of de beschikbare vertalingen van deze gebruiksaanwijzing.

ES

¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma

determinado? Entonces visite nuestra página web utilizando el siguiente enlace (código QR)

para ver las versioneAs disponibles.

IT

Desidera ricevere informazioni esaustive su questo prodotto in una lingua specica? Venga a

visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le versioni disponibili.

www.bresser.de/P7000030

www.bresser.de/warranty_terms

GARANTIE · WARRANTY · GARANTÍA · GARANZIA

RECYCLAGE (TRIMAN/FRANCE)

DE

Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere

Informationen zu diesem Produkt oder die verfügbaren Übersetzungen dieser Anleitung zu

nden.

GB

Visit our website via the following QR Code or web link to nd further information on this

product or the available translations of these instructions.

FR

Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode

d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le code QR ou le

lien correspondant.

NL

Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over

dit product of de beschikbare vertalingen van deze gebruiksaanwijzing.

ES

¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma

determinado? Entonces visite nuestra página web utilizando el siguiente enlace (código QR)

para ver las versioneAs disponibles.

IT

Desidera ricevere informazioni esaustive su questo prodotto in una lingua specica? Venga a

visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le versioni disponibili.

www.bresser.de/P7000030

www.bresser.de/warranty_terms

GARANTIE · WARRANTY · GARANTÍA · GARANZIA

RECYCLAGE (TRIMAN/FRANCE)

English ............................. 4

Deutsch ........................... 22

4

Table of contents

1 Imprint.......................................................................................................6

2 Validity note ..............................................................................................6

3 About this Instruction Manual ...............................................................7

4 General safety instructions.....................................................................7

5 Parts overview and scope of delivery ..................................................10

6 Screen display .........................................................................................12

7 Before commissioning ...........................................................................13

8 Power supply...........................................................................................14

9 Battery level indicator ...........................................................................15

10 Automatic time setting..........................................................................15

11 Manual time setting...............................................................................16

12 Time zone setting ...................................................................................16

13 Alarm setting ..........................................................................................17

14 Snooze function ......................................................................................17

15 Receiving measurements automatically.............................................18

16 Display change °C/°F ..............................................................................18

17 Weather trend.........................................................................................18

18 MAX/MIN weather data.........................................................................19

19 Backlight/display dimming ...................................................................19

5

20 Disposal.................................................................................................. 19

21 Technical data....................................................................................... 20

22 Warranty................................................................................................ 20

23 CE declaration of conformity .............................................................. 21

6 / 44

1 Imprint

Bresser GmbH

Gutenbergstr. 2

46414 Rhede

Germany

www.bresser.de

For any warranty claims or service inquiries, please refer to

the information on "Warranty" and "Service" in this docu-

mentation. We ask for your understanding that unsolicited

returns cannot be processed.

Errors and technical changes excepted.

The reproduction of this documentation - even in extracts -

in any form (e.g. photocopy, print, etc.) as well as the use

and distribution by means of electronic systems (e.g. image

file, website, etc.) without the prior written permission of

the manufacturer is prohibited.

The designations and brand names of the respective com-

panies used in this documentation are generally protected

by trade, trademark and/or patent law in Germany, the

European Union and/or other countries.

2 Validity note

This documentation is valid for the products with the follow-

ing article numbers:

7000030

Manual version: 1023

Manual designation:

Manual_7000030_MeteoCast-Pico_en-de_BRESSER_v102023a

Always provide information when requesting service.

7 / 44

3 About this Instruction Manual

NOTICE

These operating instructions are to be considered a

component of the device.

Read the safety instructions and the instruction manual

carefully before using this device.

Keep these instruction manual in a safe place for future ref-

erence. If the device is sold or passed on, the instruction

manual must be passed on to any subsequent owner/user

of the product.

4 General safety instructions

DANGER

Risk of an electric shock!

This device contains electronic parts that are powered by a

power source (AC adapter and/or batteries). Improper use

of this product may result in electric shock. Electric shock

can cause serious or fatal injuries. It is therefore imperative

that you observe the following safety information.

• Never leave children unattended when handling the

device! Follow the instructions carefully and do not at-

tempt to power this device with anything other than

power sources recommended in this instruction

manual, otherwise there is a danger of an electric

shock!

• Disconnect the power supply by pulling the mains plug

when the appliance is not in use, in case of a longer in-

terruption of operation and before any maintenance

and cleaning work.

8 / 44

• Place your device so that it can be disconnected from

the power supply at any time. The power outlet should

always be near your appliance and should be easily ac-

cessible, as the plug of the power cord serves as a dis-

connect device from the mains supply.

• To disconnect the unit from the mains, always pull the

mains plug and never pull the cable!

• Check this device, cables and connections for damage

before use.

• Never attempt to operate a damaged device, or a

device with damaged electrical parts! Damaged parts

must be replaced immediately by an authorized service

agent.

• Operate the device only in a completely dry environ-

ment and do not touch the device with wet or damp

body parts.

DANGER

Danger of suffocation!

Improper use of this product may result in suffocation, es-

pecially for children. It is therefore imperative that you ob-

serve the following safety information.

• Keep packaging materials (plastic bags, rubber bands,

etc.) away from children! There is a danger of choking!

• This product contains small parts that can be swal-

lowed by children! Choking hazard!

DANGER

Explosion hazard!

Improper use of this product may result in fire. It is essen-

tial that you observe the following safety information in or-

der to avoid fires.

9 / 44

• Do not expose the device to high temperatures. Use

only the supplied AC adapter or the recommended bat-

teries. Do not short-circuit the device or batteries or

dispose of in fire! Excessive heat and improper hand-

ling can cause short circuits, fires and even explosions!

NOTICE

Danger of material damage!

Improper handling may result in damage to the unit and/or

accessories. Therefore, use the device only in accordance

with the following safety information.

• Do not disassemble the device! In the event of a defect,

please contact your dealer. They will contact the Service

Center and can arrange the return of this device for re-

pair if necessary.

• Do not expose the device to high temperatures and

protect it from water and high humidity.

• Do not immerse the unit in water!

• Do not subject the device to excessive vibrations.

• Only use accessories and spare parts for this device

that comply with the technical specifications.

• Use only the recommended batteries. Always replace

weak or empty batteries with a new, complete set of

batteries at full capacity. Do not use batteries from dif-

ferent brands or types or with different capacities. Re-

move batteries from the device if it is not to be used for

a longer period of time!

• Do not use rechargeable batteries (accumulators).

10 / 44

NOTICE

Danger of voltage damage!

The manufacturer accepts no liability for voltage damage as

a result of incorrectly inserted batteries, or the use of an un-

suitable mains adapter!

5 Parts overview and scope of delivery

A

C

B

D

7

8

9

10

2

3

13

20

21

23

25

24 15

16

17

19

5

4

1

18

11

6

12

22

14

Illustration1: All parts of the weather station (top), the wireless sensor (bottom

right) and the power adapter with accessories (bottom left).

1 [SNZ/LIGHT] button (touch-sensit-

ive surface)

2 Housing (station)

3 Display 4 [DOWN] button

5 [UP] button 6 Stand, foldable

7 Wall mount fixture 8 [RESET] knob

11 / 44

9 [SET] button 10 Battery compartment (station)

11 Battery compartment cover (sta-

tion)

12 DC connection socket

13 Display (sensor) 14 Housing (sensor)

15 Function indicator 16 Wall mount fixture

17 [°C/°F] button 18 Battery compartment (sensor)

19 Battery compartment cover

(sensor)

20 Adapter fixture

21 Locking knob 22 DC hollow plug

23 Power cord 24 Plug adapter (EU)

25 Plug adapter (UK)

Scope of delivery:

weather station (A), thermo/hygro wireless sensor (B), AC

mains adapter (C), plug adapter 2x (D)

Also required (not included):

2x AAA/LR03 batteries (sensor), 2x AAA/LR03 batteries (sta-

tion, optional)

12 / 44

6 Screen display

D5

D15

D6

D9

D13

D8

D6

D14

NORMAL ALARM

D3

D2

D1

D7

D10

D11

D12

D17

D2

D6

D18

D16

D4

D16 D4

Illustration2: Displays of the weather station in the ‘NORMAL’ mode (left) and in

the’ALARM’ mode (right)

D1 Weather trend display D2 Symbol for active alarm

D3 Time (hours:minutes) (in ‘NOR-

MAL’ mode)

D4 Seconds (in ‘NORMAL’ mode)

D5 Display "DST" with automatic time

display (summer time)

D6

D7 Outdoor humidity (in %) D8 MIN or MAX info for outdoors

D9 MIN or MAX info for indoors D10 Indoor humidity (in %)

D11 Battery level indicator (station) D12 Indoor temperature (°C/°F select-

able)

D13 Battery level indicator (sensor) D14 Outdoor temperature (°C/°F se-

lectable)

D15 Active radio signal transmission

icon

D16 Alarm time (hours : minutes) (in

‘ALARM’ mode)

D17 AL icon for ‘ALARM’ mode

13 / 44

7 Before commissioning

NOTICE

Avoid connection faults!

In order to avoid connection problems between the devices,

the following points must be observed during commission-

ing.

1. Place the base unit (receiver) and sensor (transmitter)

as close together as possible.

2. Connect the power supply to the base unit and wait un-

til the indoor temperature is displayed.

3. Establish power supply for the sensor.

4. Set up/operate the base unit and sensor within the ef-

fective transmission range.

When changing the batteries, always remove the batteries

from both the base unit and the sensor and reinsert them in

the correct order so that the radio link can be re-estab-

lished. If one of the two devices is operated via a mains

power connection, the power connection must also be

briefly disconnected for this device when the batteries are

changed. If, for example, only the batteries in the sensor

are replaced, the signal may subsequently not be received

at all or not be received correctly.

Note that the actual range depends on the respective con-

struction materials used for the buildings as well as the re-

spective position of the base unit and the outdoor sensor.

External influences (various radio transmitters and other

sources of interference) can greatly reduce the possible

range. In such cases, we recommend finding other locations

for both the base unit and the outdoor sensor. Sometimes

moving the sensor by just a few centimeters is enough!

14 / 44

8 Power supply

NOTICE!The base unit can be operated both with the sup-

plied power adapter or with batteries.

Base unit

1. Press and hold the locking knob on the adapter fixture

of the AC power adapter. At the same time, insert the

desired plug adapter into the adapter fixture and turn

it in as far as it will go in the "LOCK" direction. Release

the locking knob.

2. Insert the DC barrel connector into the DC connection

socket on the base unit.

ATTENTION! Make sure that the plug adapter is firmly

and securely fastened in the adapter fixture of the AC

power adapter before proceeding!

3. Insert the AC power adapter with the previously moun-

ted plug into the power outlet.

4. The device is powered on directly.

5. Wait until indoor temperature is displayed on the base

unit.

6. To replace the plug adapter, hold down the locking

knob and turn the plug adapter in the "OPEN" direction

and remove it from the adapter holder. Then perform

step 1 to mount another plug adapter.

NOTE: Alternatively, operation using batteries (LR03

AAA/LR03) is also possible.

The display goes into sleep mode during battery opera-

tion and can be activated for approx. 15 Seconds by

pressing the snooze button. To do this, proceed as fol-

lows:

7. Remove the battery compartment cover.

8. Insert batteries into the battery compartment. Make

sure that the batteries are correctly aligned (+/- poles).

9. Replace the battery compartment cover.

15 / 44

10. Wait until indoor temperature is displayed on the base

unit.

Wireless sensors

11. Remove the battery compartment cover.

12. Insert batteries into the battery compartment. Make

sure that the battery terminals are correctly aligned (+/-

poles).

13. Replace the battery compartment cover.

9 Battery level indicator

1. When the level of the batteries in the base station or in

the wireless sensor reaches a critical level, the battery

level symbol appears in the appropriate area on the

display.

2. When replacing one set of batteries, always remove the

batteries from the other part of the unit and reinsert

them in the correct order (see chapter "Setting up

power supply"). Replace the batteries to be changed in

the corresponding part of the device with a completely

new set with full capacity. This ensures that the connec-

tion between the devices will be reestablished again

correctly.

10 Automatic time setting

After power supply has been established, the unit automat-

ically searches for the radio signal. It takes approximately 3

to 8 minutes for this process to be completed.

If the radio signal is correctly received, the time is set auto-

matically and the reception symbol is displayed.

If the radio clock signal is not received, press the UP button

for approx. 3 seconds to initiate signal reception.

If still no radio signal is received, the time must be set

manually.

16 / 44

For more information on manual time setting, see section

"Manual time setting".

11 Manual time setting

1. In normal display mode, press the SET button for about

3 seconds to enter the time settings mode.

2. Digits to be set are flashing.

3. Press [UP] or [DOWN] button to change the value.

4. Press the [SET] button to confirm and switch to the next

setting.

5. Order of settings: time zone/offset > 12/24 hour mode

> hours > minutes

6. Finally, press the [SET] button to save the settings and

exit settings mode.

12 Time zone setting

The time zone is set as part of the manual time setting. Fur-

ther information can also be found in the chapter “Manual

Time Adjustment”.

1. Press the SET button for approx. 3 seconds to enter the

time setting mode.

2. Possibly press the SET button several times until the

display shows the setting for the time zone (the factory

setting is '00').

3. Press UP or DOWN button to select the desired time de-

viation in hours (-12 to +12 hours).

4. Finally, press SET button for approx. 3 seconds to con-

firm the set time deviation.

17 / 44

13 Alarm setting

NOTICE!The alarm setting cannot be made when the time

signal search is active (the corresponding icon is flashing).

Wait until the time signal search is completed to set the

alarm manually.

1. Press the [SET] button to display the alarm time (AL).

2. Press the [SET] button for approx. 3 seconds to enter

the alarm time settings mode.

3. Digits to be set are flashing.

4. Press [UP] or [DOWN] button to change the value.

5. Press the [SET] button to confirm and switch to the next

setting.

6. Order of the settings: hours > minutes

7. Finally, press the [SET] button to save the settings and

exit settings mode.

Activate/deactivate the alarm

8. In normal display mode, press the SET button to display

the currently set alarm time.

9. Press the [UP] or [DOWN] button to activate the alarm.

The symbol is shown on the display.

10. Press [UP] or [DOWN] button to deactivate the alarm.

The symbol is no longer displayed.

14 Snooze function

1. When the alarm sounds, press the SNZ/LIGHT button to

activate the snooze function. The alarm sounds again

after 5 minutes.

2. When the alarm sounds, press any other key to stop

the alarm until the set alarm time is reached again.

18 / 44

15 Receiving measurements automatically

As soon as the batteries have been inserted, the base sta-

tion starts showing the measurement values for indoors.

The first measurement values received by the outdoor

sensor are displayed within approx. 3 minutes after com-

missioning.

The reception symbol appears on the base station display.

If no signal is received, press the [DOWN] button for ap-

prox. 3 seconds to initiate reception of the measured val-

ues again.

16 Display change °C/°F

•Base unit

In normal display mode, press the DOWN button to toggle

between °C and °F.

•Wireless sensor

Open the battery compartment.

Press the °C/°F button to toggle between °C and °F.

Close the battery compartment.

17 Weather trend

A weather trend for the next 12-24 hours is calculated from

the measured values and graphically displayed as follows:

Illustration3: The weather trend indicators on the base station dis-

play

Meaning of the icons (from left to right):

sunny / partly cloudy / cloudy / rain / snow

19 / 44

18 MAX/MIN weather data

The maximum and minimum readings for indoor and out-

door temperature as well as for the humidity are stored by

the base station over a period of 24 hours:

1. Press the [UP] button several times to display the

stored values one after the other.

2. Display sequence: Maximum values (MAX) > Minimum

values (MIN) > Current values

3. While the minimum or maximum values are displayed,

press the [UP] button for approx. 3 seconds to irrevoc-

ably delete the stored maximum/minimum values.

NOTICE!If the recording range for a value is undershot,

'LL.L' is shown in the display. If the recording range is ex-

ceeded, 'HH.H' is shown in the display.

19 Backlight/display dimming

NOTICE!In battery mode, backlight is deactivated by de-

fault, while in mains mode it is activated.

1. In battery mode, press the SNZ/LIGHT button to enable

the backlight for about 5 seconds.

2. In mains operation, press the SNZ/LIGHT button to dis-

able or enable the backlight (display dimming).

20 Disposal

Dispose of the packaging materials according to its type. In-

formation on proper disposal can be obtained from the muni-

cipal waste disposal service provider or environmental agency.

Do not dispose of electronic devices in the household

garbage!

According to the European Directive 2012/19/EU on Waste

Electrical and Electronic Equipment and its transposition into

national law, used electrical equipment must be collected sep-

arately and recycled in an environmentally sound manner.

20 / 44

Batteries and rechargeable batteries must not be disposed of

with household waste. You are legally obliged to return used

batteries and accumulators and can return them after use

either at our sales outlet or in the immediate vicinity (e.g. in the

trade or in municipal collection points) free of charge.

Batteries and accumulators are marked with a crossed-out

dustbin and the chemical symbol of the pollutant, "Cd" stands

for cadmium, "Hg" stands for mercury and "Pb" stands for lead.

21 Technical data

Base station

Radio clock signal: DCF

Power supply: DC 5V 1A via AC power adapter

Battery operation (optional): 2x AAA/LR03 1.5V batteries

Temperature measurement unit: °C or °F selectable

Temperature measurement range: -10°C to +50°C

Humidity measurement range: rH 20% to 95%

Wireless sensor

Battery operation: 2x AAA/LR03 batteries

Temperature measurement unit: °C or °F selectable

Temperature measurement range: -40°C to +70°C

Humidity measurement range: rH 20% to 95%

Transmission frequency: 433Mhz

Maximum transmission power: below 10mW

Transmission range: up to 30 m (in undisturbed terrain)

22 Warranty

The regular warranty period is 2 years and starts on the day

of purchase. To benefit from an extended voluntary war-

ranty period as indicated on the gift box, registration on our

website is required.

Page is loading ...

Bresser 7000030 Owner's manual

Bresser 7000030 Owner's manual

in other languages

Related papers

Other documents