2. Kmart
  3. 41872215

Kmart 41872215 User manual

  • Hello! I'm your chat assistant, and I've reviewed the Assembly Instruction for the Corner Caddy. This document outlines how to assemble the caddy using adhesive pads, suction caps, and plastic knobs, while also highlighting important cautions regarding mounting surfaces and load capacity. I am ready to answer your questions about this product and its assembly.
  • What surfaces should I avoid when mounting the caddy?
    What is the maximum load capacity?
    What parts are included in the suction cap?
CAUTION!
● DO NOT USE ON PAINTED AND UNEVEN / ROUGH SURFACES.
● MAXIMUM LOAD CAPACITY: 2KG
PART LIST
Adhesive Pad x 2 Corner Caddy x 1Suction Cap x 2
3. Peel off adhesive pad from the paper and stick
it in position.
1. Ensure that the surface where the product will
be mounted is completely clean and dry.
2. Separate all parts of the suction caps. The suction cap
includes a chrome plated casing, a PVC base and a
plastic knob.
4. Suction the transparent PVC base onto the adhesive
pad, and press it firmly around the edges. Make sure
all air is removed. Ensure suction caps are centred and
aligned.
5. Place the round chrome plated casing over
the PVC base.
6. Place the corner caddy over the caps with the
screws coming through the wires. Screw the
plastic knob onto the exposed screws and
tighten by turning it clockwise.
Assembly Instruction
Please read instructions carefully. Be sure you have all parts before you begin to assemble.
Attention: Please check the knob(s) periodically to ensure they remain fully tightened.
/