Julian Bowen ECL102 Assembly Instructions

Type
Assembly Instructions
Eclipse Bunk Bed
Product Code - ECL101/ECL102/ECL103
Approximate Assembly Time People Required to Assemble Tools Required
1hr
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
Before you start...
Please carefully unpack and lay out all of the component parts to ensure nothing
is missing and to check each component for any obvious damage.
Should you identify any concerns at this stage please contact the retailer from
whom this product was purchased. Please quote your order number, details of
your issue, the product code, and the batch number from the cartons which will
help to resolve your issue as quickly as possible.
Version Number - 1.0
1785mm
2402mm
1503mm
Page : 2 of 51
Page : 3 of 51
We strongly advise that you do not use Power Tools, such as
drills or electric screwdrivers during the assembly as this may
cause irreparable damage and will invalidate your warranty.
Please check all hardware matches the list below. Should
you notice any are missing please contact your retailer.
63PCS 65PCS 2PCS 94PCS
Cam Stud Cam Contractfix Dowel M8 x 25mm
2PCS
M8 x 50mm
ABCD E
FGHJK
13PCS 9PCS 8PCS
M6 x 50mm M4 x 22mmM4 x 45mm
8PCS
M4 x 38mm
8PCS
M4 x 30mm
LQRST
29PCS 13PCS 7PCS
M3.5 x 14mm M6 Round Nut
M6 x 13mm
16PCS
M6 x 40mm
21PCS
M6 x 50mm
Page : 4 of 51
We strongly advise that you do not use Power Tools, such as
drills or electric screwdrivers during the assembly as this may
cause irreparable damage and will invalidate your warranty.
Please check all hardware matches the list below. Should
you notice any are missing please contact your retailer.
4PCS
Castor
24PCS
Sticker
2PCS
Drawer Stopper
1PCS
Braket
1PCS
Hole Plug 10mm
UV W X Y Z
9PCS 8PCS9PCS
M6 x 35mm M6 x 25mm M6 x 20mm
1PCS
M6 x 12mm
19PCS
M6
30PCS
M6 x 30mm
M P N Z1 Z2
2 SET
14" Drawer Slide
1PCS
Circle Stopper
8PCS
PVC Back Support
34PCS
Felt Pads
2PCS
M4
Z3 Z4 Z5 Z6 Z7
02 01
12
13
14
17
15
21
22
23
24
25
27
31
32 33
34
LVL Slats x15
05
06 07
08
26
28
29
30
60 x8
04
20
03
09
10
11
16
18
19
35
36
37
38
39
40
41
41
42
44
45
48
49
50
52 x2
53 x2
54 x2
55 x2
56
57
46
58
59
47
43
43
48
51
PARTS
Please ensure you carefully check all the pieces, should you have any
concerns please contact the retailer before assembly commences.
Please have your order number, details of the issue, the product code,
and the batch number from the cartons as this will help us to resolve
your issue much faster.
Page : 5 of 51
IMPORTANT INFORMATION
WARNING - High Beds and the upper bed of bunk beds are not suitable for children under
six years due to the risk of injury from falls.
WARNING - Bunk beds and high beds can present a serious risk of injury from
strangulation if not used correctly. Never attach or hang items to any part of the bunk bed
that are not designed to be used with the bed, for example, but not limited to ropes, st rings,
cords, hooks, belts and bags.
WARNING - Children can become trapped between the bed and the wall, a roof pitch, the
ceiling, adjoining pieces of furniture (e.g.cupboards) and the like. To avoid risk of serious
injury the distance between the top safety barrier and the adjoining structure shall not
exceed 75mm or shall be more than 230mm.
WARNING - Do not use the bunk bed / high bed if any structural part is broken or missing.
It is recommended that you always follow the manufacturer's instructions to assemble this
product.
Always follow the manufacturer's recommended mattress size, as per these instructions and
the bunk bed / high bed maximum mattress height marking on the item:
Recommended Mattress Size: 90cm x 190cm (UK Single) with Minimum Depth of 17.0cm
It is necessary to frequently ventilate the room in order to keep the humidity low and to
prevent mould in and around the bed.
Please periodically check all the fixings of the item and re-tighten when necessary.
This item conforms to European Safety Standards - BS EN 747-1: 2012 + A1: 2015.
Page : 6 of 51
Safety Advice
Please take the time to carefully read through the whole of these instructions before you
commence.
Keep these instructions for future reference.
Unpack, inspect and check off all of the contents.
Please dispose of all packaging safely.
Small component parts could choke a child if swallowed.
We strongly recommend that you keep children well away from the work area.
It would be sensible to lay a sheet or blanket on the floor where you intend to work to
avoid scratching this product and to protect your floor.
This product is heavy. Take extreme care when lifting to avoid personal injury or damage
to the product.
Assemble the product as close to its intended final position in the room as possible.
HANDY HINT: If you keep the hardware in a bowl during assembly you will be less
likely to lose them.
Page : 7 of 51
150.3cm
240.2cm
178.5cm
We strongly urge that you do not use Power Tools, such as drills or electric screwdrivers
during this assembly as this could cause irreparable damage to your product and will
invalidate the warranty.
"WARNING: In order to prevent overturning this product must be used with the wall
attachment device provided."
Page : 8 of 51
ASSEMBLY ADVICE
Please take the time to carefully read through these instructions
before you commence.
Keep these instructions for future reference.
We advise that the product is assembled in the room it is intended for.
We advise that you keep the hardware in a bowl during assembly to
avoid losing anything.
We strongly recommend that you keep children away from the work
area.
Small component parts could choke a child if swallowed.
We recommend you use a sheet or blanket to protect both floor and
product through the assembly stages.
This product is heavy, and we recommend a 2 person lift to avoid
personal injury or damage to the product.
Never push or pull the product as this could cause both personal injury
or irreparable damage to product or floor.
We have tried to make this piece of furniture easy to assemble if the
instructions are followed carefully.
In the unlikely event that you have problems with assembling the
product or have missing or damaged parts, please contact your
retailer and we will assist them in rectifying the problem as quickly as
possible.
Please remember we strongly urge you DO NOT use power tools such
as drill or electric screwdrivers as this could cause irreparable damage
to your product and will invalidate your warranty.
1
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
WRONG
CORRECT
B x 14
A x 14
D x 27
A
10
D
11
12
13
14
16
17
18
Page : 9 of 51
2 3
54
L x 8
Z4 x 4 L
L
10
10
12
13
11
x 4
13
10
16
Z4
Page : 10 of 51
x 1
x 1
6 7
8
17
15
x 4
x 2
14
Page : 11 of 51
9
10
18
x 2
G x 2
G
19
18
G
Page : 12 of 51
11
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
WRONG
CORRECT
02
B x 18
D x 22
A x 8
A
D
01
03
04
06
07
05
Page : 13 of 51
12
08
A x 10
A
P x 1
09
P
P
Page : 14 of 51
13
14 W x 3
09
x 2
15 W x 3
W
W
W
04
02
05
04
02
03
W
W
W
Page : 15 of 51
16
17
06
x 3
07
09
06
Page : 16 of 51
x 1
x 1
18
x 2
19
01
Z6 x 2
09
06
L
Z6
L x 2
Page : 17 of 51
20
x 4
04
21
x 5
02
01
06
08
06
04
Page : 18 of 51
22
23 Z2 x 8
G x 1
R x 3
S x 3
G
S
R
S
S
R
R
Z2
Z2
Z2
Z2
Z2
Z2
Page : 19 of 51
24
25
W x 2
Z x 2
U x 2
U
U
58
23
448mm
384mm
58
W
Z
20
09
Z
W
Page : 20 of 51
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51

Julian Bowen ECL102 Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI