Contec BX-956S Owner's manual

IPC Series

BOX-PC

for BX956S Series

User’s Manual

CONTEC CO., LTD.

BX-956S User’s manual i

Check Your Package

Thank you for purchasing the CONTEC product.

The product consists of the items listed below.

Check, with the following list, that your package is complete. If you discover damaged or missing items,

contact your retailer.

Product Configuration List

BX-956SD-DCx00000

[Base Type]

BX-956SD-DCxxxxxx *1

[OS Pre-install Type]

Name

Pcs.

BOX-PC

1

The attachment fittings

2

CFast card removal prevention fitting

1

1 *2

USB removal prevention fitting (angle)

6

Washer assembled screw (M3 x 6)

7

6

Washer assembled screw (M3 x 8, black)

4

Washer assembled and cross recessed

hexagonal bolt (M4 x 10, black)

4 4

Cable clamp

1

2

Power supply

connector complete set

Power connector

1

Contact

4

DVI-analog RGB conversion adapter

1

Product guide

1

*1 Except for base type.

*2 It is attached to the main body.

Product Configuration Image

* See the Product Configuration List to check if all the components are included for the specified number of units.

ii BX-956S User’s manual

Related Manuals

Must Read the Following Manuals.

Name

Purpose

Contents

How to get

Product Guide

Must read this after opening

the package.

This lists the product

configuration and describes

the precautions.

Included in the package (Printed

matter)

Reference Manual

(This Document)

Read this when operating

the product.

This describes the hardware

aspects such as functions and

settings.

Download from the

CONTEC website (PDF)

IPC Precaution

List

Read this before operating

the product.

This describes the precautions

when using the product.

Download from the

CONTEC website (PDF)

MICROSOFT

SOFTWARE

LICENSE

TERMS *1

Must read this after opening

the package.

This describes the rights and

conditions of user when using

Windows software.

Download from the

CONTEC website (PDF)

Manual for OS

Pre-installed

Typel *1

Must read this after opening

the package.

This describes the basic

information of OS, and the

procedures of setup and

recovery.

Download from the

CONTEC website (PDF)

*1 Reference for pre-installed typels only.

Download MICROSOFT SOFTWARE LICENSE TERMS

Download it from the following URL.

Download https://www.contec.com/support/useterms/

Download Manuals

Download the manuals accordingly from the following URL.

Download https://www.contec.com/download/

BX-956S User’s manual iii

Copyright

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this

document.

The information in this document is subject to change without notice.

All relevant issues have been considered in the preparation of this document. Should you notice an

omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may

appear in this document or for results obtained by the user as a result of using this product.

Trademarks

Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS, Microsoft

and Windows are trademarks of Microsoft Corporation. Other brand and product names are trademarks

of their respective holder.

iv BX-956S User’s manual

Table of Contents

Check your package ............................................................................................................................. i

Related Manuals .................................................................................................................................. ii

Copyright ............................................................................................................................................ iii

Trademarks ......................................................................................................................................... iii

Table of Contents ............................................................................................................................... iv

1. INTRODUCTION 1

About the Product................................................................................................................................ 1

Features ........................................................................................................................................ 2

Supported OS ............................................................................................................................... 3

Customer Support ................................................................................................................................ 4

Web Site ....................................................................................................................................... 4

How to Obtain Service ........................................................................................................................ 4

Liability ............................................................................................................................................... 4

Safety Precautions ............................................................................................................................... 5

Safety Information ........................................................................................................................ 5

Caution on the BX-956S Series .................................................................................................... 5

Security Warning................................................................................................................................. 9

2. SYSTEM REFERENCE 11

Specifications .................................................................................................................................... 11

Power Management Features ............................................................................................................ 13

Power Requirements ......................................................................................................................... 14

Power Consumption ................................................................................................................... 14

Physical Dimensions ......................................................................................................................... 15

3. HARDWARE SETUP 17

Before Using the Product for the First Time ..................................................................................... 17

Hardware Setup ................................................................................................................................. 18

Attaching the CFast Attachment Fittings ................................................................................... 18

Attaching the Attachment Fittings ............................................................................................. 19

Attaching the FG ........................................................................................................................ 19

Fastening the Cable .................................................................................................................... 20

Installation of VESA metal fittings ............................................................................................ 21

Installation Requirements ........................................................................................................... 22

4. BIOS SETUP 25

Introduction ....................................................................................................................................... 25

BX-956S User’s manual v

Starting Setup .................................................................................................................................... 25

Using Setup ....................................................................................................................................... 26

Getting Help ............................................................................................................................... 26

In Case of Problems ................................................................................................................... 26

A Final Note About Setup .......................................................................................................... 26

Main Menu ........................................................................................................................................ 27

Setup Items ................................................................................................................................. 27

Main .................................................................................................................................................. 28

Advanced .......................................................................................................................................... 29

Trusted Computing ..................................................................................................................... 31

ACPI Settings ............................................................................................................................. 33

RAS Configration ....................................................................................................................... 35

Super IO Configuration .............................................................................................................. 36

H/W Monitor .............................................................................................................................. 38

CPU Configuration ..................................................................................................................... 39

PPM Configuration .................................................................................................................... 40

SATA Configuration .................................................................................................................. 41

Network Stack Configuration ..................................................................................................... 42

CSM Configuration .................................................................................................................... 43

Intel(R) I210 Gigabit Network Connection ................................................................................ 44

Chipset .............................................................................................................................................. 46

North Bridge............................................................................................................................... 47

Intel IGD Configuration ............................................................................................................. 48

LCD Control ............................................................................................................................... 50

South Bridge Configuration ....................................................................................................... 51

Azalia HD Audio Configuration ................................................................................................ 53

USB Configuration ..................................................................................................................... 54

LAN Configuration .................................................................................................................... 56

Security ............................................................................................................................................. 57

Logging Boot .................................................................................................................................... 59

Secure Boot menu ...................................................................................................................... 61

Boot Configuration............................................................................................................................ 62

Save & Exit ....................................................................................................................................... 64

CONTEC Utility ........................................................................................................................ 66

Disk Copy................................................................................................................................... 67

Self Inspection ............................................................................................................................ 70

5. EACH COMPONENT FUNCTION 73

Component Name .............................................................................................................................. 73

Front View ................................................................................................................................. 73

Right side view ........................................................................................................................... 73

System Configuration ........................................................................................................................ 74

Component Function ......................................................................................................................... 75

vi BX-956S User’s manual

LED: POWER, ACCESS, STATUS .......................................................................................... 75

DC Power Input Connector: DC-IN ........................................................................................... 75

POWER SW ............................................................................................................................... 76

LINE OUT Interface: LINE OUT .............................................................................................. 76

MIC IN Interface: MIC .............................................................................................................. 76

DVI Interface: DVI-I .................................................................................................................. 77

USB3.0 Port: USB3.0 ................................................................................................................. 79

USB2.0 Port: USB2.0 ................................................................................................................. 79

Giga bit-Ethernet: LAN A, B ..................................................................................................... 80

CFast Card Connector: CFast1, 2 ............................................................................................... 81

Serial Port Interface: SERIAL A, B ........................................................................................... 82

GPIO Connector: DIO ............................................................................................................. 83

6. APPENDIX 85

POST Codes ...................................................................................................................................... 85

SERIAL I/O Address and Register Function .................................................................................... 88

Watch-Dog-Timer ............................................................................................................................. 94

Battery ............................................................................................................................................... 98

Life of CFast ..................................................................................................................................... 99

7. LIST OF OPTIONAL PRODUCTS 101

1. Introduction

BX-956S User’s manual 1

1. Introduction

About the Product

This product is a fanless computer for embedded applications. It features an Intel Atom processor E3845

chipset. Thanks to a quad-core CPU, simultaneous stable high-speed processing for four applications is

possible with four cores. This CPU also allows for computing power almost four times that of

conventional products in addition to three times the graphics performance, a significant improvement.

Moreover, power consumption has been significantly reduced, resulting in nearly double the power

efficiency compared with the previous generation's architecture. This "resource-saving PC" helps you

design more compact, energy efficient equipment to reduce running costs and promote energy efficiency.

It has extension interfaces such as DVI-I, 1000BASE-T, USB 2.0, USB 3.0, DIO, and serial. It employs

a CFast card for storage and is fanless to ensure a totally spindleless design that simplifies maintenance.

Embedded-type CPU have been adopted. The use of readily available parts ensures the ease of the use of

the product. In addition, the use of Contec-customized BIOS allows support to be provided at the BIOS

level.

This product is available in the following 12 models:

- Base model with Intel Atom Processor E3845 1.91GHz

BX-956SD-DC700000 (Memory 4GB, ECC, without OS, without CFast)

BX-956SD-DC800000 (Memory 8GB, ECC, without OS, without CFast)

- OS-installed model with Intel Atom Processor E3845 1.91GHz

BX-956SD-DC731314 (Memory 4GB, ECC, Windows Embedded Standard 7 RUNTIME P 32bit

(Japanese, English, Chinese, Korean), CFast Card (SLC) 16GB)

BX-956SD-DC761314 (Memory 4GB, ECC, Windows Embedded Standard 7 RUNTIME P 32bit

(Japanese, English, Chinese, Korean), CFast Card (MLC) 32GB)

BX-956SD-DC771314 (Memory 4GB, ECC, Windows Embedded Standard 7 RUNTIME P 32bit

(Japanese, English, Chinese, Korean), CFast Card (Q-MLC) 16GB)

BX-956SD-DC 781314 (Memory 4GB, ECC, Windows Embedded Standard 7 RUNTIME P 32bit

(Japanese, English, Chinese, Korean), CFast Card (Q-MLC) 32GB)

BX-956SD-DC761724 (Memory 4GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), CFast Card (MLC) 32GB)

BX-956SD-DC 781724 (Memory 4GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), CFast Card (Q-MLC) 32GB)

BX-956SD-DC 7D1724 (Memory 4GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), CFast Card (TLC) 128GB)

BX-956SD-DC 881724 (Memory 8GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), CFast Card (Q-MLC) 32GB)

BX-956SD-DC 8C1724 (Memory 8GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), CFast Card (iSLC) 40GB)

BX-956SD-DC 8D1724 (Memory 8GB, ECC, Windows 10 IoT Enterprise LTSB 2016 64bit

(Japanese, English, Chinese, Korean), CFast Card (TLC) 128GB)

1. Introduction

2 BX-956S User’s manual

Features

- Contributing to reduction of running cost and promotion of energy efficiency

It adopts the low-power platform with Intel® AtomTM Processor E3845 that realizes lower power

consumption while ensuring sufficient performance.

- Design that meets the safety standard

This product, as in our other products, is designed to comply with the safety standard of VCCI, FCC, CE,

and furthermore, its safety has been certified to meet the UL standard for Europe and the U.S.

- Slitless/fanless design that reduces maintenance work

This product's spindleless design eliminates the heat dissipating slit and CPU fan and adopts CFast card

for the storage. There is no need to worry about the intrusion of dust or foreign objects, and the use of

parts that degrade over time is minimized to facilitate maintenance.

- Remote power management function to reduce operation tasks

Supports system startup by external device over network (Wake-on-LAN), by general purpose input

(power on by GPI), and by modem reception (power on by ring). It encourages significant labor saving in

operation.

- Major types of peripherals are supported with rich interfaces including the two CFast card slots

It has a variety of extended interface such as DVI-I x 1, 1000BASE-T x 2, USB3.0 x 1, USB2.0 x 5,

serial (RS-232C) x 2, DIO x 1.

It has two CFast card slots, providing the ability to separate data from the operating system, as well as the

convenience of being able to use one slot for system startup and the other for maintenance or for taking

home system logs or collected data.

- Falling-off prevention tools and fixing clamps provided to avoid trouble caused by disconnected cable

This product stays trouble-free, being equipped with USB removal prevention fitting and cable clamp for

connectors with no locking mechanism, such as USB cable, and with hardware to properly mount and

avoid falling out of CFast card.

- Safety design required for embedded applications

For Windows Embedded Standard installed model or Windows 10 IoT Enterprise LTSB 2016 installed

model, it is possible to use the WF*1 function of OS. It is designed for safety required for embedding

purpose, for example, prohibiting unwanted writing to the CFast card with WF function will relieve the

concern about the writing limits to the CFast card and prevent an unintentional system alteration.

*1 EWF (Enhanced Write Filter) is a function of Windows Embedded Standard. UWF (Unified Write Filter) is a function of Windows 10

IoT Enterprise LTSB 2016. They protect the disk from being actually written by redirecting the writing to RAM.

1. Introduction

BX-956S User’s manual 3

- A wide range of power supplies (10.8 - 31.2VDC) supported

As the product supports a wide range of power (10.8 - 31.2VDC), it can be used in a variety of power

environments. The separately available AC adapter adds support for 100 - 240VAC power.

- "Power failure protection system" features power-off without OS shutdown

Equipped with the "Power failure protection system" function that protects data and prohibits writing to

storage in the event of power failure *2. Along with the lockdown (disk writing suppression) function of

Windows IoT Enterprise, power can be safely turned off without a shutdown process. Moreover, file

system damage or data damage caused by sudden power failure can be avoided.

*2 Only the CFast Card 40GB (iSLC) model and CFast Card 128GB (TLC) model are compatible with the " Power failure protection

system “.

- CONTEC-customized BIOS provides useful utility

Useful utility of BIOS *3 customized by CONTEC is provided. The "CONTEC Fast Boot" achieves

Windows startup in less than half the normal time.*4

The "Disk Copy" function provides secure disk backup at the BIOS level, and also supports backup in file

format or compressed file format. We also offer the CONTEC tools “BIOS update tool” for updating

BIOS. *5

*3 For details, see each setting in the [BIOS Setup] section.

*4 Time may vary depending on configuration. Note that TXE, TPM, Network Stack, and SMART Self Test are not supported when the

CONTEC Fast Boot is enabled.

*5 Contact your retailer for more information.

Supported OS

- Windows Embedded Standard 7 32bit (Japanese, English, Chinese, Korean)

- Windows 10 IoT Enterprise LTSB 2016 64bit (Japanese, English, Chinese, Korean)

2.10 or more than it of a main-frame BIOS version is an operating conditions of Windows 10.

CAUTION

1. Introduction

4 BX-956S User’s manual

Customer Support

CONTEC provides the following support services for you to use CONTEC products more efficiently and

comfortably.

Web Site

https: //www.contec.com/

Latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical documents in the PDF.

Free download

You can download updated driver software and differential files as well as sample programs available in

several languages.

Note! For product information

Contact your retailer if you have any technical question about a CONTEC product or need its price,

delivery time, or estimate information.

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please

obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you

purchased before returning any product.

* No product will be accepted by CONTEC group without the RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be

liable for any incidental or consequential damages due to such defect or consequences that arise from

inexperienced usage, misuse, or malfunction of this device.

1. Introduction

BX-956S User’s manual 5

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting in

injury or death and the destruction of equipment and resources. Understand the meanings of these labels

to operate the equipment safely.

Signal word used to indicate an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

Signal word used to indicate a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

Signal word used to indicate a potentially hazardous situation which, if not avoided,

could result in minor or moderate injury.

Caution on the BX-956S Series

Handling Precautions

- Always check that the power supply is turned off before connecting or disconnecting power cables.

- Do not modify the product.

- Always turn off the power before inserting or removing circuit boards or cables.

- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other

applications that require a very high level of reliability. Do not use the product in such applications.

- If using this product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

- Do not attempt to replace the battery as inappropriate battery replacement poses a risk of explosion.

- For battery replacement, contact your retailer as it must be performed as a process of repair.

- When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws

and municipal ordinances. For details on replacing the battery, refer to the appendix.

DANGER

WARNING

CAUTION

WARNING

1. Introduction

6 BX-956S User’s manual

- Do not use or store this product in a location exposed to high or low temperature that exceeds range

of specification or susceptible to rapid temperature changes.

Example: - Exposure to direct sun

- In the vicinity of a heat source

- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this

product with its interior penetrated by water or any other fluid or conductive dust. If this product

must be used in such an environment, install it on a dust-proof control panel, for example.

- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of

specification.

- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such

products will cause this product to malfunction.

- Do not use or store this product in the presence of chemicals.

- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.

Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or

discoloration of the paint.

- This product’s case may become hot. To avoid being burned, do not touch that section while this

product is in operation or immediately after turning off the power. Avoid installation in a location

where people may come into contact with that section.

- CONTEC does not provide any guarantee for the integrity of data on CFast.

- Always remove the power cable from the power outlet before mounting or removing an expansion

board and before connecting or disconnecting a connector.

- Always remove the power cable from the power outlet before connecting or disconnecting a

connector.

- As for the product with a D-SUB connector, the appropriate tightening torque for the cable connector

is less than 2 kgf·cm.

- To prevent corruption of files, always shutdown the OS before turning off this product.

- CONTEC reserves the right to refuse to service a product modified by the user.

- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power

cord immediately and contact your retailer.

- To connect with peripherals, use a grounded, shielded cable.

- The CFast card connector doesn't support hot plug. The pulling out opening of the CFast card cannot

be done in the state of power supply ON. Please neither pulling out opening of CFast in the state of

power supply ON of this product nor come in contact with CFast. This product may malfunction or

cause a failure.

- If you use any other CFast than our CFast, we can not guarantee this product’s specification. When

you newly select CFast for this product, you should read “Chapter 7” at first. If you select

unpreferable CFast, the system may work out of order.

- Component Life:

(1) Battery---The internal calendar clock and CMOS RAM are backed by a Lithium primary battery.

The backup time at a temperature of 25°C with the power disconnected is 10 years or

more.

(2) CFast --- Window installed model uses a CFast card in the OS storage area.

The estimated failure rate is 1 every 60,000 rewrites for SLC models and 1 every 2,000

rewrites for MLC models and 1 every 3,000 rewrites for TLC models and 1 every

20,000 rewrites for Q-MLC models and 1 every 30,000 rewrites for iSLC models.

* Replacement of expendables is handled as a repair (there will be a charge).

* The service life for consumable parts are reference values and are not guaranteed values.

CAUTION

1. Introduction

BX-956S User’s manual 7

* This product's specifications allow the device to be rebooted from the BIOS screen during startup.

This has no effect on operation after the OS boots

The caution when you register UL for your system with this product

- The Pollution Degree of UL for this product is certified as 2.

- Use the power supply of Limited Power Source regulated in SELV and UL/IEC60950-1.

- Install mechanical enclosures to keep an operator from touching the heat sink of this product.

- Ensure that external enclosures must work as fire enclosures.

FCC PART15 Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

NOTE

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

1. Introduction

8 BX-956S User’s manual

CCC EMC 部分A类通告 *

高地热带请求警告声明

警告标识警告声明

仅适用于海拔2000m以下地区安全使用

仅适用于非热带气候条件下安全使用

* The following models are excluded from CCC.

- Base model with Intel Atom Processor E3845 1.91GHz

BX-956SD-DC700000 (Memory 4GB, ECC, without OS, without CFast)

BX-956SD-DC800000 (Memory 8GB, ECC, without OS, without CFast)

此为 A级产品，在生活环境中，该产品可能会造成无綫电干扰。

在这种情况下，可能需要用户对干扰采取切实可行的措施。

1. Introduction

BX-956S User’s manual 9

Security Warning

When connecting to the network, be aware of security-related problems. See the examples of Security

measures below and set up the product properly along with the network devices.

[Information security risks]

- Unauthorized access from the outside through a network could cause the system halt, data damage, or

exposure to malware *1.

- Invaded and used as a stepping stone, a device might attack the others through networks.

(a victim becomes an assailant)

- Information might leak without realizing due to the connection to the network.

- Secondary damages such as harmful rumors, liability in damages, social credibility fall, and opportunity

loss are expected led by the troubles described above.

*1… Malware (Malicious Software) is software that brings harm to a computer system and performs unintended operations.

[Security measures - e.g.]

- Do not keep using the default password. (Refer to the product manual for the password setting).

- Set a strong password.

⇒Combined with upper and lowercase letters, and numbers so that it cannot be easily analogized

by others.

- Change the password periodically.

- Disable unnecessary network services and functions.

- Restrict access to the network with network devices. *2

- Restrict ports to be released on the network with network devices.

- Create a closed network connection using such as dedicated network or VPN*3.

*2…Inquire for setting procedure to manufacturers.

*3…VPN (Virtual Private Network): a secured network that wards off unauthorized access by protecting the communication path with

authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole that are

endlessly found day and night. Please understand that risks are always involved with the Internet

connection, and we strongly recommend a user should constantly update information security measures.

1. Introduction

10 BX-956S User’s manual

2. System Reference

BX-956S User’s manual 11

2. System Reference

Specifications

Table 2.1. Functional Specifications < 1 / 2 >

Model BX-956SD-DC7xxxxx BX-956SD-DC8xxxxx

CPU Intel® Atom™ Processor E3845 1.91GHz

BIOS BIOS (mfd. by AMI)

Memory 4GB, 204pin SO-DIMM socket x 1,

PC3-10600(DDR3L 1333 ECC)

8GB, 204pin SO-DIMM socket x 1,

PC3-10600(DDR3L 1333 ECC)

Graphic Intel® HD Graphics (built-in CPU)

System

resolution

Analog RGB

640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,

1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,

1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors)

DVI-D

640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,

1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,

1,600x900, 1,680x1,050, 1,920x1,080 (16,770,000 colors)

Audio HD Audio compliant, LINE OUT x 1, MIC IN x 1

CFast card slot

2 slot, CFast CARD Type I x 2 bootable

BX-956SD-DC700000:-

BX-956SD-DCx3xxxx: Built-in CFast card slot (SLC) (16GB, 1 partition) *1

BX-956SD-DCx6xxxx: Built-in CFast card slot (MLC) (32GB, 1 partition) *1

BX-956SD-DCx7xxxx: Built-in CFast card slot (Q-MLC) (16GB, 1 partition) *1

BX-956SD-DCx8xxxx: Built-in CFast card slot (Q-MLC) (32GB, 1 partition) *1

BX-956SD-DCxCxxxx: Built-in CFast card slot (iSLC) (40GB, 1 partition) *1

BX-956SD-DCxDxxxx: Built-in CFast card slot (TLC) (128GB, 1 partition) *1

LAN *2 Intel I210IT Controller

1000BASE-T/100BASE-TX/10BASE-T 2 port (Wake On LAN support)

USB USB 3.0 compliant 1 port

USB 2.0 compliant 5 port

Serial I/F RS-232C (general-purpose) : 2port (SERIAL PORTA, B), 9pin D-SUB connector (male)

Baud rate : 50 - 115,200bps

General-purpose I/O Non-isolated type : I/O 6 channels,

Power switch signal

Hardware monitoring Monitoring CPU temperature, power voltage

Watchdog timer Software programmable ,255

level(1sec - 255sec)

Time up allows reset

RTC/CMOS Lithium backup battery life: 10 years or more.

The real-time clock is accurate within ±3 minutes (at 25°C) per month

Power Management Power management setup via BIOS, Power On by Ring / Wake On LAN,

Supports PC98/PC99 ACPI Power management

Secutity (TPM) TCG TPM2.0

*1: The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that can be recognized from

OS might be displayed fewer than an actual value.

2. System Reference

12 BX-956S User’s manual

Table 2.1. Functional Specification < 2 / 2 >

Model

BX-956SD-DC7xxxxx

BX-956SD-DC8xxxxx

Interface

Display

DVI-I x 1 (29pin DVI-I connector)

Audio LINE OUT : 3.5φ Stereo mini jack, Full-scale output level 1.4Vrms(Typ.)

MIC IN : 3.5φ Stereo mini jack, Full-scale input level 1.4Vrms(Typ.)

CFast card slot

2 slot, CFast CARD Type I x 2, bootable

BX-956SD-DC700000 : -,

BX-956S D-DCx3xxxx : Built-in CFast card slot contains a CFast card(SLC) .

(16GB, 1 partition)*1

BX-956S D-DCx6xxxx : Built-in CFast card slot contains a CFast card(MLC) .

(32GB, 1 partition)*1

BX-956S D-DCx7xxxx : Built-in CFast card slot contains a CFast card(Q-MLC) .

(16GB, 1 partition)*1

BX-956SD-DCx8xxxx : Built-in CFast card slot contains a CFast card(Q-MLC) .

(32GB, 1 partition)*1

BX-956SD-DCxCxxxx : Built-in CFast card slot contains a CFast card (iSLC) .

(40GB, 1 partition) *1

BX-956SD-DCxDxxxx : Built-in CFast card slot contains a CFast card (TLC) .

(128GB, 1 partition) *1

LAN *2 2 port (RJ-45 connector)

USB USB3.0 compliant 1port (TYPE-A connector x1)

USB2.0 compliant 5port (TYPE-A connector x5)

RS-232C

2 port (9pin D-SUB connector [male])

DIO

General-purpose I/O

1 port (9pin D-SUB connector [femaie])

Power supply

Rated input voltage

12 - 24VDC *3

Range of input

voltage

10.8 - 31.2VDC

Power consumption

12V 3.4A, 24V 1.8A

External device power

supply capacity

CFast card slot : 3.3V : 1A(500mAx2)

USB3.0 I/F : +5V : 0.9A (900mAx1)

USB2.0 I/F : +5V : 2.5A (500mAx5)

Physical dimensions

(mm) 182 (W) x 115(D) x 29(H) (No protrusions)

Weight

About 1.0kg (Excluding attachment fittings)

*2: If you use the 1000BASE-T, be careful of the operating temperature.

For more details on this, refer to chapter3, Installation Requirements.

*3: Use a power cable shorter than 3m.

2. System Reference

BX-956S User’s manual 13

Table 2.2. Installation Environment Requirements

Model

BX-956SD-DC7xxxxx

BX-956SD-DC8xxxxx

Ambient

specifications

Operating temperature

*4

0 - 60°C (With 1000BASE-T: 0 - 55°C), airflow 0.7m/s

0 - 50°C (With 1000BASE-T: 0 - 45°C), no airflow

Storage temperature

-10 - 60

°

C

Humidity 10 - 90%RH (No condensation)

Floating dust particles

Not to be excessive

Corrosive gases

None

Line-noise

resistance

Line noise AC line / ±2kV *5,

Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)

Static

electricity

resistance

Contact discharge / ±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)

Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)

Vibration

resistance

Sweep

resistance

10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G

60 min. each in x, y, and z directions

(JIS C60068-2-6compliant, IEC68-2-6-compliant)

Impact resistance 100G, half-sine shock for 6 ms in x, y, and z directions

(JIS C0041-compliant, IEC68-2-27-compliant)

Grounding

Class D grounding, SG-FG / continuity

Standard

VCCI Class A, FCC Class A,

CE Marking (EMC Directive Class A, RoHS Directive), UKCA,

UL/c-UL, CCC *6

*4 : Derating occurs due to the way of installation. For more details on this, refer to the “Installation Requirements” in

chapter 3.

*5 : When AC adapter “ACAP19-01” is used.

*6 : The models of BX-956SD-DC700000 and BX-956SD-DC800000 are excluded from CCC.

Power Management Features

- Support both ACPI (Advanced Configuration and Power Interface).

- ACPI v2.0 compliant

- Hardware automatic wake-up

Page is loading ...

Contec BX-956S Owner's manual

Contec BX-956S Owner's manual

Related papers