GE Appliances SBSD137HWW Malay

Laundry Washer & Dryer:

Measurement Cheat Sheet

Measure the narrowest doorway or hallway from outside the home to the location

where the appliance will be installed.

Width of narrowest hallway / doorway in inches: inches

incheswidth

inchesdepth

inchesheight

36” Depth x 60” Width provides

clearance for most washer dryer sets.

Measure the opening where the appliance(s) will go.

Take door, oor and wall mouldings into consideration.

Verify the appliances you’re considering to t within the measurements you took in step 2.

width

depth

height

width

vent

ventheightdepth

Appliance Questions? Call 1-888-295-5965

widthmodelbrand

WashersDryers

Use this as a guide to make sure the appliance you want fits in the space you have available.

• Appliance depth OR width must be smaller than the width above.

• Some home doors can be removed if necessary.

• Because of venting, the dryer is typically the constraining factor of depth. Verify vent space requirements

for each appliance you’re considering.

• Allow 1” on all sides to reduce noise.

height

with lid open

requirements

will vary

This manual is also suitable for

Download PDF