Laundry Washer & Dryer:
Measurement Cheat Sheet
Measure the narrowest doorway or hallway from outside the home to the location
where the appliance will be installed.
Width of narrowest hallway / doorway in inches: inches
incheswidth
inchesdepth
inchesheight
36” Depth x 60” Width provides
clearance for most washer dryer sets.
1
Measure the opening where the appliance(s) will go.
Take door, oor and wall mouldings into consideration.
2
Verify the appliances you’re considering to t within the measurements you took in step 2.
3
width
depth
depth
height
width
vent
ventheightdepth
Appliance Questions? Call 1-888-295-5965
widthmodelbrand
WashersDryers
Use this as a guide to make sure the appliance you want fits in the space you have available.
• Appliance depth OR width must be smaller than the width above.
• Some home doors can be removed if necessary.
• Because of venting, the dryer is typically the constraining factor of depth. Verify vent space requirements
for each appliance you’re considering.
• Allow 1” on all sides to reduce noise.
height
with lid open
requirements
will vary
/