Lehmannaudio Black Cube S/E User manual

Brand
Lehmannaudio
Model
Black Cube S/E
Type
User manual

This manual is also suitable for

Lehmannaudio Black Cube S/E

The Lehmannaudio Black Cube S/E is a high-precision passive RIAA network phono stage preamplifier designed to enhance the listening experience of analog music reproduction. It offers exceptional sound quality and versatility, making it an ideal choice for audiophiles and music enthusiasts alike.

With its passive filter network, the Black Cube S/E eliminates phase errors common in active filter designs, resulting in accurate and detailed sound reproduction. Low-loss, low-tolerance WIMA foil capacitors contribute to excellent localization and soundstage imaging.

Lehmannaudio Black Cube S/E

The Lehmannaudio Black Cube S/E is a high-precision passive RIAA network phono stage preamplifier designed to enhance the listening experience of analog music reproduction. It offers exceptional sound quality and versatility, making it an ideal choice for audiophiles and music enthusiasts alike.

With its passive filter network, the Black Cube S/E eliminates phase errors common in active filter designs, resulting in accurate and detailed sound reproduction. Low-loss, low-tolerance WIMA foil capacitors contribute to excellent localization and soundstage imaging.

Black Cube
Phono Stage
High Precision Passive RIAA-Network
Manual
NEW AND IMPROVED!
Lehmannaudio
Valued customer,
Congratulations for buying the
Lehmannaudio Black Cube phono RIAA preamplifier. The Black
Cube is manufactured in Germany using very high quality components and carefully construc-
ted to give you many years of musical pleasure.
This unit is made only for being inserted between a turntable‘s passive cartridge output and
any audio amplifier‘s high level input. The Black Cube will handle nearly any system cartridge
from high-level to low-level MM or MC and is made to fulfill the demands of audiophiles who
enjoy analog music reproduction.
Please keep this manual nearby the Black Cube so that you can refer to it for further use.
Precautions
Please read the following before operating your Black Cube phono preamplifier. Whe
-
rever applicable below, Black Cube also includes the external power supply and its
cable.
While Installing the Black Cube
- Be careful to use an apropriate cable for the connection between your power outlet and the
Black Cube external power supply. Make sure that you have the appropriate version for your
mains voltage.
- Be careful to prevent the Black Cube from getting wet; do not allow water to enter the Black
Cube, especially when raining or snowing, or near a body of water. Otherwise fire or electrical
shock may result.
- Do not place heavy objects on the power cord. If the cord is damaged, fire or electrical shock
may result. In particular, it is possible that one might accidantally place a heavy object on a
carpet that covers the cord; definitely avoid these situations!
- Do not install the Black Cube in a place where it might be exposed to oil, smoke or steam (for
example, near a cooking table or humidifier). Otherwise, fire or electrical shock may result.
- Do not place the Black Cube on an unstable surface, such as an unstable bench or slanted
surface. Otherwise, the device may fall or drop, resulting in an injury.
- Do not place the power cord near a heating device. Otherwise, the cord sheath may melt,
resulting in fire or electrical shock.
- Do not locate the Black Cube in a place subject to excessive heat, such as inside a car with
all the windows closed, or in direct sunlight. Otherwise, fire may result.
- Do not handle the power plug with wet hands. Otherwise you may receive an electrical shock.
- When you remove the power plug, be sure to hold the plug. Never pull on the cord. Otherwi
-
se, the power cord may become damaged, resulting in fire or electrical shock.
- The Black Cube offers superb sonic quality. To ensure best possible results, you should use
the best quality connecting cables that you can afford. Regular maintenance involves keeping
all connections clean using a quality contact cleaner.
Using the Black Cube
Do not touch the Black Cube under the following circumstances:
- If you hear thunder, remove the power plug from the AC outlet as soon as possible. If you
fear a lightning hit and the Black Cube has been connected to an AC outlet, do not touch the
power plug. Otherwise you may receive an electrical shock.
- Do not attempt to modify this equipment. Otherwise, fire or electrical shock may result.
Warranty is void on modified devices. Exceptions: dip switch settings, fitting of custom in
-
put load and upgrading with the PWX power supply when done carefully by a skilled person
(trained technician). Normally this is your dealer.
- If you think the Black Cube needs to be checked for maintenance or repair, consult your dea
-
ler.
- Do not place a container of water or any small metal object on top of the Black Cube or
the external power supply. If water is spilled or if the metal object gets inside, fire or electri
-
cal shock may result. This applies to vases, pottet plants, glasses, cosmetic bottles, medi-
cine, etc. Do not change the setting of the dipswitches with any tools that consist of metal.
- Do not damage, process, bend, twist, stretch or heat the power cord. If the cord is dama-
ged, fire or electrical shock may result.
- When you are connecting other audio devices to the Black Cube make sure that you first
turn off the power to all devices to be connected. Refer to the user´s guide for each device
and use the specific cable for connection.
- Set the volume levels of all devices to minimum before connecting the Black Cube to your
actual setup and to the AC outlet. Otherwise, an extremely loud noise could damage your
loudspeakers or even your hearing.
- If you plan not to use the Black Cube for a long period of time (such as when you are on
vacation), remove the power plug from the AC outlet. Otherwise, a fire could possibly result.
If any abnormality occurs while using the Black Cube, remove the plug from the AC outlet.
In this case first shut off the power amplifiers or turn down the volume controls and so on
to avoid possibly damaging transients
- If you notice any abnormality - such as smoke, smell, noise, etc. - remove the plug from
the AC outlet. Confirm that the abnormality is no longer present, then consult your dealer
for repair. If you continue using the Black Cube under abnormal conditions, fire or electrical
shock may result.
- If a foreign object or water enters inside the equipment, remove the Plug from the AC out
-
let and consult your dealer for repair. If you continue using the Black Cube under this condi-
tion, fire or electrical shock may result.
- If the power cord is damaged (for example if it is cut or if the core wire is exposed), ask
your dealer for a replacement. If you continue using the Black Cube under this conditions,
fire or electrical shock may result.
- If the Black Cube or the external power supply is dropped, or if the case is damaged,
remove the plug from the AC outlet and consult your dealer. If you continue using the Black
Cube under abnormal conditions, fire or electrical shock may result.
Maintenance
- Before cleaning the Black Cube, remove the power plug from the AC outlet for safety.
Otherwise, an electrical shock may result.
- Do not open the external power supply of the Black Cube. There are hazardous voltages
inside that might result in an injury or an electrical shock.
Description
The passive filter network of the Black Cube is located between two linear active amplifier
stages. Phase errors that occur due to active filter designs are thereby eliminated. Low-loss,
low-tolerance WIMA foil capacitors in the filter network are responsible for very good locali
-
zation and soundstage reproduction.
Sensitivity for 775mV/eff. output voltage: 0,38mV/3,8mV switchable on board (MC/MM).
Input capacitance: 100pF default
Input impedances: 47 kOhms/ 1 kOhms/100 Ohms switchble on board (Dip-switches with
gold plated contacts), one slot for solder free installation of custom impedance on the prin-
ted circuit board (PCB). Hard wire Slot for switch free addition of extra custom impedance.
No need for expensive impedance plugs!
Output impedance: <100 Ohms
Gold plated RCA-connectors, massive ground connector
The external regulated power supply of the Black Cube can be placed up to two meters
away from the audio section. The cable between power supply and audio section is shielded
to keep Radio Frequency Interference (RFI) away from the nearly noiseless and highly stab-
le supply voltages. This effect is even enhanced by additional supply voltage filtering on the
double-sided audio pcb.
Case of 1,5mm aluminum protects the audio electronics.
Please read this manual first before connecting the Black Cube to mains voltage!
Input side (simplified)
1. Ground connection (GND)
If your turntable has a separate ground cable you should connect it here. You can connect
any of
- 4mm plugs
- open ends
- cable shoes
2. Signal input conectors (IN)
Please connect your tuntable´s output here. To minimize loss in the interconnect use the
shortest possible cable between tonearm and the Black Cube.
Be careful to preserve correct channel connections – left to left and right to right.
Output side (simplified)
1. Audio outputs (OUT)
RIAA-filtered high-level output. Please connect your output cables to the line input to be
used. For example, to a line-level preamplifier, active loudspeakers with volume control or
power amplifier input with volume control.
Be careful to preserve correct channel connections – left to left and right to right.
W A R N I N G: You must never connect the output cables to a following phono
input because RIAA-filtering and amplification would be done twice! You could
damage the following phono stage or your power amplifier and loudspeakers! The
resulting noise could even damage your hearing!!!
2. Control (LED)
Lits when the Black Cube audio sectionis connected to the power supply
3. Input for the external power supply
The Black Cube Audio section features a 2m shielded cable and is connected to the external
regulated power supply with a Neutrik XLR connector with gold plated contacts. Either the
standard power supply or the PWX power supply (Black Cube SE and Black Cube Twin) with
a considerably bigger and better transformer can be used. The use of the PWX power sup-
ply results in a plus of authenticity, bass reproduction, dynamics and natural flow. The PWX
power supply can be upgraded easily to the Black Cube standard.
No matter which power supply you use please connect the power supply to the audio section
first and then connect the complete unit to mains voltage! Do not unplug and replug the
power supply while listening.
Matching of gain and input load
You can change input impedance (resistive loading) and gain by using the onboard DIP-
switches for each channel separately. These switches are accessible from the bottom of the
unit. Input capacitance is always 100pF. You may change the setting of the switches with
the Black Cube connected to mains voltage and even to your stereo system however in that
case please first turn your volume knob to the minimum position because loud pops could
occur during switching.
DIP switch Table
gain / input load
Nr. 1 2 3 4
ON (MC)380µV 1 kOhms free 100R
Gain = 66dB
(for custom load)
OFF (MM)3,8mV / / /
Gain = 46dB
The Black Cube is highly flexible and also offers an insert point (R103, R203) for inserting
a resistor to accommodate cartridges which require special loading to be activated by the
switch and one additional hardwire slot for each channel for permanant installation (R100,
R200) with direct effectivity.
The impedance switches connect the impedance resistors in parallel to the 47k resistor. By
using the special impedance slots load options are unlimited. Soldering is not neccessary
Before you insert a custom load please do the following:
• Disconnect the power from the Black Cube‘s power supply.
• Place the Black Cube on a clean smooth surface.
• Carefully unscrew the four screws of the audio board‘s case with the tool included
with the Black Cube or any other 2mm hex screwdriver
• After removing the top you can now insert your custom input load for each chan
nel. Do not use any tools that could damage the electronic circuit. Please use high
quality metal film resistors.
• The DIP switches are now accessible from the outside at the bottom of the unit
near the input RCA connectors. To activate your custom load you have to set the
switches no. 3 to the “on” position.
Use only high quality resistors for custom load impedances. Install these resistors only if
you know what you are doing. Otherwise please consult your dealer.
If all switches are in the OFF-position the input impedance is 47kOhms which is suitable for
most MM cartridges. The gain switch can be activated deparately so that MC/47k becomes
an option. This is recommended for some MC cartridges.
Please refer to your cartridge‘s information sheet for the recommended load. If you only
know the internal impedance of your cartridge you can use the rule that the load imnpe
-
dance should not be less then 10x the internal impedance of the cartridge.
Both channel settings and impedances have to be identical!
Audio board view
1. R100/R200
Here are hard-wire slots for additional loads with immediate effect without having to acti-
vate an additional DIP-switch. Capacitive or resistive load placed here will be connected in
parallel to all other activated loads, at least parallel to the default load 47k / 100pF.
2. R103/R203
Here are free slots for custom loads. To activate these loads switches nr. 3 (accessible from
the bottom outside) have to be put into the „on“ position. Capacitive or resistive load placed
here will be connected in parallel to all other activated loads at least parallel to the default
load 47k / 100pF.
3. Gain_L/Gain_R
These jumpers change gain by +10dB. The jumpers are activated by default. Using DIP-
switches Nr. 1 the gain is 46dB (off) and 66dB (on) respectively. If the selected gain is too
high the jumpers can be put off.
4. Bass_L/Bass_R
These jumpers activate the Soft Bass Rolloff Filter to avoid high energy low frequency
transmission that can damage loudspeaker chassis. Corner frequency of this filter is 60 Hz,
attenuation is 6dB/Oct. The jumpers are not activated as default.
5. DC_L/DC_R
By actiation of these jumpers the output capacitors are bridged. The DC jumpers are not
activated as default.
WARNING: When the output capacitors are bridged there can be DC offset voltage present
at the Black Cube‘s output connectors. Please make sure that the following input stage is
AC-coupled before activating the DC jumpers. If you do not know the coupling status of the
next following input stage have your setup checked by a dealer or avoid to use this jumper.
DC at the output stage of a power amplifier can destroy loudspeaker chassis!
21.12.2005 11:56:37 f=1.80 N:\Produktion\Geräte\Black_Cube_II\black_cube_II__E35.brd
+
1234
OFF
1234
OFF
Black Cube phono stage
IC201
IC202
R206
R207
R204
R203
R202
R208
R209
R212
R213
R210
R214
R215
C207
C206
C208
C209
C210
C204
C205
C214
C213
R216
C215
SW201
R205
R200
IC101
IC102
R106
R107
R104
R103
R102
R108
R109
R112
R113
R110
R114
R115
C107
C106
C108
C109
C110
C104
C105
C114
C113
R116
C115
SW101
R105
R100
R111
R211
R101
R201
BASS_LGAIN_L GAIN_R BASS_R
L301
L302
R302
R303
DC_L DC_R
D303
R301
D302
D301
+UB
GND
-UB
C111
C211
C102 C202
C112
C212
C103
C203
RCA1 RCA2
RCA4
RCA3
C101
C201
3,0
3,03,0
1. R100/R200
2. R103/R203
3. Gain_L/Gain_R
4. Bass_L/Bass_R
5. DC_L/DC_R
sensitivity / load
switch Nr. 1 2 3 4
ON (MC)250µV 1K free 100R
Gain = 66dB (for custom load)
OFF (MM)2,5mV / / /
Gain = 46dB
Common settings
Switch 1 2 3 4 View Gain
Dip-switch Jumper
Cartridge
MM off off off off X
MM High Output off off off off -
MC /47kOhm on off off off X
MC /47kOhm on off off off -
high output
MC 1kOhm on on off off X
MC 1kOhm on on off off -
high/mid output
MC 100 Ohm on off off on X
MC 100 Ohm on off off on -
high/mid output
MC custom load on off on off X
MC custom load on off on off -
high/mid output
X = Jumper in place
(Default)
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
The Black Cube supplies practically unlimited load adaption for practically every cartridge on
the market. The high maximum gain of 66dB for MC cartridges makes sure that even very
low output cartridges can be used with satisfactory results. Sensitivity quoted above is cal-
culated for an output level of 500mV.
It is not possible to overload the Black Cube with any known phono cartridge if the unit is
set up correctly.
Below some DIP-switch /gain jumper combinations for several kinds of cartridge are shown.
Please note that both channel have to be configured identically to maintain correct stereo
balance.
Technical Data
Input sensitivity: MM MC
for output level of
755mV/ 0dB 3,8mV/1 kHz 380µV/1kHz
Gain 1kHz (incl. gain jumper) 46dB 66dB
Max. input level1kHz: 32mVmV 3mV
Channel deviation: typ. max. 0,5dB
Channel crosstalk: fx = 1 kHz > 86dB
fx = 10 kHz > 85dB
Input impedances: 47kOhms/1kOhms/100 Ohms switchable on board the
audio PCB. One place for custom impedance on board the
audio PCB. One additional hard wire slot for direct effectivity.
No soldering required.
Input capacitance: 100pF
Output impedance: < 100 Ohms
Impedance following stage: >10kOhm recommended
Measures: WxHxD (case only) 114mm x 44mm x 108mm
Power consumption: approximately. 3VA
External power supply: +/- 15VDC
Manufacturer‘s address:
Lehmannaudio
Dipl. Ing. Norbert Lehmann
Richard Zanders Str. 54
51469 Bergisch Gladbach
Germany
phone: +49 2202 280 62 40
fax: +49 2202 280 62 39
email: [email protected]
Web: www.lehmannaudio.de
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Lehmannaudio Black Cube S/E User manual

Brand
Lehmannaudio
Model
Black Cube S/E
Type
User manual
This manual is also suitable for

Lehmannaudio Black Cube S/E

The Lehmannaudio Black Cube S/E is a high-precision passive RIAA network phono stage preamplifier designed to enhance the listening experience of analog music reproduction. It offers exceptional sound quality and versatility, making it an ideal choice for audiophiles and music enthusiasts alike.

With its passive filter network, the Black Cube S/E eliminates phase errors common in active filter designs, resulting in accurate and detailed sound reproduction. Low-loss, low-tolerance WIMA foil capacitors contribute to excellent localization and soundstage imaging.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents