Page is loading ...
PS6616AG
22IN DIA BALL FOUNTAIN-AGED GRANITE
ASSEMBLY INSTRUCTION
Warning! Do not plug the pump prior to assembly. Once assembled fill with water before
plugging in adaptor.
Step 1
Insert tube on ball through hole on base. Turn ball clockwise to lock.
Step 2
Connect pump wire to adaptor wire. Fill with water up to level shown below before plugging in adaptor.
Pump wire
Adaptor
wire
Adaptor
Water up to this level
WARNING
To reduce risk of Electric shock, connect only to a properly grounded outlet.
Do not exceed voltage shown on pump.
To reduce risk of Electric shock, never submerge transformer under water.
CAUTION
Always disconnect from Electrical outlet before handling the pump.
Pump must be completely submerged for proper operation and cooling.
WARNINGS AND CAUTIONS
/