Husqvarna QT5000FX4 User manual

Brand: Husqvarna

Model: QT5000FX4

Category: Side-by-side fridge-freezers

Type: User manual

This manual is also suitable for

241737900

241737900 (Aug 2006)

Dishwasher

Use & Care Guide

Side-By-Side Refrigerator

Finding Information

PLEASE READ AND SAVE THIS GUIDE

Thank you for choosing Electrolux. This Use & Care Guide is part of our

commitment to customer satisfaction and product quality throughout the service life

of your new refrigerator.

We view your purchase as the beginning of a relationship. To ensure our ability to

continue serving you, please use this page to record key product information.

MAKE A RECORD FOR QUICK REFERENCE

________________________________________________

Purchase Date

________________________________________________

Electrolux Model Number

________________________________________________

Electrolux Serial Number (see picture for location)

NONO

TETE

Registering your product with Electrolux enhances our ability to

serve you. You can register by dropping your Product Registration

Card in the mail.

Attach your sales

receipt to this

page for future

reference.

TABLE OF CONTENTS

Finding Information ............................................ 2

Safety ................................................................... 3

Installation ........................................................... 5

Removing The Doors .......................................... 6

Connecting The Water Supply ........................... 8

Feature Overview ................................................ 9

Controls & Settings .......................................... 10

Storage Features............................................... 14

Automatic Ice & Water Dispenser ................... 18

Changing The Filters ........................................ 23

Storing Food & Saving Energy ........................ 25

Normal Operating Sounds & Sights ............... 27

Care & Cleaning ................................................ 28

Solutions To Common Problems .................... 31

Safety

IMPORTANT SAFETY INSTRUCTIONS

General Safety

• Do not store or use gasoline, or other flammable liquids, near this or any

other appliance. Read product labels for warnings regarding flammability and

other hazards.

• Do not operate the refrigerator in the presence of explosive fumes.

• Avoid contact with any moving parts of the automatic ice maker.

• Remove all staples from the carton to avoid cut injuries. Staples can also

damage finishes if they come in contact with other appliances or furniture.

Child Safety

Packing Materials:

• Packing cartons covered with rugs, bedspreads, plastic sheets or stretch

wrap may become airtight chambers and can quickly cause suffocation.

• Destroy or recycle the product’s carton, plastic bags, and any other exterior

wrapping material immediately after the refrigerator is unpacked. Children

should never play with these items.

Child Entrapment And Suffocation:

• These problems are not limited to the past. Whether junked, abandoned or

temporarily stored (even for a few hours), unattended refrigerators and

freezers are dangerous.

ELECTRICAL INFORMATION

• If the power cord is damaged, it should be replaced by the manufacturer,

service technician or a qualified person to prevent any risk.

• Never unplug the refrigerator by pulling on the power cord. Always grip the

plug firmly, and pull straight out from the receptacle to prevent damaging the

power cord.

• Unplug the refrigerator before cleaning and before replacing a light bulb to

avoid electrical shock.

WARNINGWARNING

WARNING

Please read all safety instructions before using your new Electrolux refrigerator.

WARNINGWARNING

WARNING

You must follow these guidelines to ensure that your refrigerator’s safety mechanisms are

operating correctly.

Safety

• Performance may be affected if the voltage varies by 10% or more. Operating

the refrigerator with insufficient power can damage the compressor. Such

damage is not covered under your warranty.

• Do not plug the unit into an outlet controlled by a wall switch or pull cord to

prevent the refrigerator from being turned off accidentally.

Installation

LOCATION

• Choose a place that is near a grounded electrical outlet. Do Not use an

extension cord or an adapter plug.

• If possible, place the refrigerator out of direct sunlight and away from the

range, dishwasher or other heat sources.

• The refrigerator must be installed on a floor that is level and strong enough to

support a fully loaded refrigerator.

• Consider water supply availability for models equipped with an automatic ice

maker.

INSTALLATION

Installation Clearances

Allow the following clearances for ease of installation and plumbing and electrical

connections:

Sides & Top 10 mm (3/8 inch)

Back 25 mm (1 inch)

IMPORIMPOR

IMPOR

ANTANT

ANT

To turn off power to your refrigerator, unplug the power cord from the wall outlet.

CACA

UTIONUTION

UTION

Do Not install the refrigerator where the temperature will drop below 13°C (55°F) or rise

above 43°C (110°F). The compressor will not be able to maintain proper temperatures inside

the refrigerator. Do Not block the toe grille on the lower front of your refrigerator. Sufficient

air circulation is essential for the proper operation of your refrigerator.

Installation

Door Opening

Your refrigerator should be positioned to allow easy access to a counter when

removing food. For best use of drawers and freezer baskets, the refrigerator

should be in a position where both the refrigerator and freezer doors can be fully

opened.

Removing And Replacing The Toe Grille

To remove the toe grille:

1 Open freezer and refrigerator compartment doors.

2 Remove the screw from each side of the toe grille.

3 Pull the toe grille forward and lift it off.

Reverse these instructions to install the toe grille.

Leveling

All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator

is equipped with adjustable front rollers to help level your unit. To ensure proper

door seal and assist door closing, the refrigerator should be tilted 6 mm (1/4 inch),

front to back.

To level your refrigerator:

1 Remove toe grille (see above) to access the front

rollers.

2 Adjust the rollers by turning each roller adjustment

bolt with a wrench until the refrigerator is level and

stable.

3 Check both doors to be sure seals touch cabinet on all

four sides.

4 Replace the toe grille.

Tips:

• If the freezer door is higher than the refrigerator door, raise the right corner

and/or lower the left corner until the doors align across the top of the cabinet.

• If the refrigerator door is higher than the freezer door, raise the left corner

and/or lower the right corner until doors align across the top of the cabinet.

NONO

TETE

If your refrigerator is placed with the door hinge side against a wall, you may have to allow

additional space so the door can be opened wider.

Removing The Doors

GETTING THROUGH NARROW SPACES

If your refrigerator will not fit through an entrance area, you can reduce its size by

removing the doors. Check first by measuring the entrance.

Required Tools

You will need the following tools:

To prepare for removing the doors:

1 Make sure the electrical power cord is unplugged from the wall outlet.

2 Open both doors and remove the toe grille.

3 Remove any food from the door shelves.

4 Close the doors.

To remove the top hinge cover:

1 Remove the three screws from the cover over the top door hinges.

2 Pull the cover forward about a half-inch and

lift it off.

NONO

TETE

For more information on removing the toe grille, please refer to the Installation section.

Adjustable

Wrench

Socket

Wrench Set

Phillips Head

™

Tools Necessary:

3/8” Fixed

Wrench

AND

Removing The Doors

To remove the refrigerator door:

1 Trace lightly around the door’s top hinge with a pencil. This makes

reinstallation easier.

2 Remove the two screws from the top hinge. Lift the door off of the

bottom hinge and and set it aside.

3 Remove the three bottom hinge screws and hinge if necessary.

To reinstall the refrigerator door, reverse the above steps.

Once both doors are in place, also replace the

top hinge cover.

To remove the freezer door:

1 Detach the multi-wire cable connector

located above the top hinge. Grasp both

sides of the connector firmly and pull apart.

2 Trace lightly around the hinge with a pencil.

This makes reinstallation easier.

3 Detach the water tube from the connector

located below the freezer door. The

connector releases when you press its

outer sleeve inward.

4 Remove the screws from the top hinge.

Leave the multi-wire cable inside the hinge.

Do not unscrew the ground wire that

attaches the cable to the hinge. Lift the

door off of the bottom hinge.

5 Remove the three bottom hinge screws and

hinge if necessary.

6 Lay the door on its side to avoid damage to

the water tube extending from the bottom hinge.

To reinstall the freezer door, reverse the above steps. Once both doors are in

place, also replace the top hinge cover.

CACA

UTIONUTION

UTION

Be sure doors are set aside in a secure position

where they cannot fall and cause personal injury.

Connecting The Water Supply

ABOUT YOUR REFRIGERATOR’S WATER SUPPLY

The automatic ice & water dispenser on your refrigerator requires a permanent

water supply to function correctly. During installation, you (or a service

professional) establish this water supply by connecting a copper tube from your

household water system to a valve at the rear of the refrigerator.

What you will need:

• Access to a cold water line with pressure of 1.4-6.9 bars.

• The water connector kit that comes with your refrigerator, which provides all

materials for a water supply installation, including 7.6 m (25 feet) of copper

tubing.

To connect the water supply to the rear of your

refrigerator:

1 Ensure that the refrigerator is not plugged in.

2 Flush the supply line until water is clear by placing the

end of the copper tube in a sink or bucket and opening

the shut-off valve.

3 Unscrew the plastic cap from the water valve inlet at

the rear of your refrigerator. Discard the cap.

4 Slide the brass compression nut, then the ferrule

(sleeve) onto copper tube.

5 Push the copper tube into water valve inlet as far as it

will go (6.5mm).

6 Slide the ferrule (sleeve) into valve and finger-tighten

the compression nut onto valve. Tighten another half

turn with a wrench. Do not over-tighten.

7 Secure the copper tube to your refrigerator’s rear panel

with a steel clamp and screw (see illustration).

CACA

UTIONUTION

UTION

To avoid property damage:

• Use copper tubing for the water supply line (plastic tubing is more

likely to leak). Manufacturer is not responsible for any damage if

plastic tubing is used for supply line.

• Ensure water supply complies with local plumbing codes.

• For proper dispenser operation, recommended water supply pressure

should fall between 1.4 and 6.9 bars. Excessive pressure may cause

water filter to malfunction.

Connecting The Water Supply

8 Coil the excess copper tubing (about 2½ turns) behind your refrigerator as

shown. Arrange coiled tubing to avoid vibration or wear against other

surfaces.

9 Open water supply shut-off valve and tighten any connections that leak.

Feature Overview

NONO

TETE

After connecting the water supply, see information in this guide about priming an empty

water supply system. Also read all topics in the “Automatic Ice & Water Dispenser” section

to learn about normal operating procedures.

Fixed

Door Bin

Ice Maker

Ice Cream Shelf

Freezer and Refrigerator

Controls

Dairy

Compartment

CAUTION:

Do Not Remove

Magnet Behind

Dairy

Compartment

Door Bin

Fixed

Door Bin

Toe Grille

Tall Bottle

Retainer

Can Rack

Special Item

Rack

Sliding Shelf

SpillProof

Crisper Pan

and Cover

Water Filter

SpillProof

Aspect Shelf

Tilt Out

Door Bin

Tilt Out

Door Bin

Tilt Out

Door Bin

Large Basket

Large

Glide Out

Basket

Shelf

Small Basket

Ice Container

Door Bin

Meat Keeper

and Cover

NONO

TETE

Features may vary according to model.

Controls & Settings

ALLOWING COOLING TIME BEFORE USE

To ensure reliable food storage, allow your refrigerator and freezer to operate with

the doors closed for 8 to 12 hours before placing food inside. During this cooling

period, you do not need to adjust the controls, which are preset at the factory.

SETTING COOLING TEMPERATURES

Your refrigerator comes with a state-of-the-art electronic digital control system. The

system’s control panel is located at the top of the the fresh food compartment. The

two digital displays

on the left half of the

control panel

indicate the current

temperatures of

your freezer and

fresh food

compartments.

To adjust the temperature to a higher or lower setting, press the Up or Down

Arrow button closest to the display. The first time you press the button, the display

shows the last setting you entered. Each press of the button after that increments

the setting by one degree.

The display shows your new setting momentarily, then changes back to the current

temperature. (Refer to following pages for more about temperature settings.)

Choosing Centigrade or Fahrenheit

Depending on which temperature standard you prefer to

use, you can set your control panel to display in

centigrade or fahrenheit. To change between fahrenheit

and centigrade, press the Mode button (located between

the two digital temperature displays).

NONO

TETE

The advanced electronic control system in your refrigerator includes additional display

modes that service professionals can use to rapidly diagnose performance issues.

Press to alternate between

Centigrade and Fahrenheit

Controls & Settings

Making Temperature Adjustments

After running your refrigerator for 24 hours, you can adjust temperatures as

needed. Make your adjustments small and gradual, allowing time for temperatures

to change and stabilize. Refer to the following guidelines for temperature settings.

What To Do If The Temperature Displays Flash

If ever you you see both temperature displays continuously flashing, it may indicate

that the control system has detected a performance problem. Call your Electrolux

service representative, who can interpret the flashing message.

SYSTEM-MONITORING ALARMS

The electronic control system continuously monitors your

refrigerator/freezer for temperature consistency, doors left

ajar, and power failures. Variances from normal operating

conditions are communicated by audible tones and a set of

four status indicator lights.

Temperature Control Range

Freezer Fresh Food

Fahrenheit Centigrade Fahrenheit Centigrade

Warmest

6° -14°

47° 8°

Warmer

Factory Setting

Midpoint

0° -18°

37° 3°

Coldest

-10° -23°

33° 1°

Colder

Temperature Adjustment Guide

If Fresh Food compartment is too warm

Adjust Fresh Food control one degree

colder by pressing Down Arrow button.

If Fresh Food compartment is too cold

Adjust Fresh Food control one degree

warmer by pressing the Up Arrow button.

If Freezer compartment is too warm

Adjust Freezer control one degree colder

by pressing Down Arrow button.

If Freezer compartment is too cold

Adjust Freezer control one degree warmer

by pressing the Up Arrow button.

Alarm Reset Button

Indicator Lights

NONO

TETE

Each time you make settings on the control panel, a single

audible tone acknowledges your input.

CACA

UTIONUTION

UTION

The alarm system does not automatically reset if you disconnect and reconnect your

refrigerator’s power cord. It can only be reactivated by pressing the Alarm Reset button.

Controls & Settings

Responding to Alarms (Audible Tones & Indicator Lights)

Your refrigerator’s control system can convey the following information through

audible tones and the alarm indicator lights.

Using The Alarm Reset Button

You can disable or activate the alarm system by pressing and holding the Alarm

Reset button for three seconds. Use it, for example, to turn off audible tones and/

or flashing indicator lights.

Once you disable the alarm system, you must again press and hold the Alarm

Reset button for three more seconds to reset (activate) the alarm system. The On

indicator light remains off while the Freezer and Fresh Food compartments cool

toward the current temperature settings. When temperature settings are reached,

the On light displays green to indicate an active alarm system.

Alarm

Name

Indicator

Light

Audible

Tones

Condition

How To Respond

(light is

off)

Alarm system is not active

while Freezer and Fresh

Food compartments are

cooling toward the current

temperature settings.

If Freezer and Fresh Food

compartments do not match your

temperature settings in three hours,

expect the control system to signal

other conditions.

Steady

Green

Alarm system is active. No response required.

Door

Ajar

Flashing

Green

Freezer or Fresh Food

door has been open for

over five minutes.

Close door to disable and reset alarm.

High

Temp

Flashing

Amber

Freezer or Fresh Food

compartment has been too

warm (7.2° C or higher) for

over an hour.

Press Alarm Reset button to turn off

alarm.

Power

Failure

Flashing

Amber

A power outage was

detected.

Press Alarm Reset button to turn off

alarm and again to reset. Check if the

power failure lasted long enough to

affect stored food temperatures.

Controls & Settings

Checking the Air Filter Status

Your refrigerator’s fresh food air filter needs to be

replaced from time to time. You can monitor the need

for replacement by pressing and holding the Air Filter

On/Off button for three seconds.

To check the air filter status:

1 Press the Air Filter On/Off button. This activates

a test cycle, and one of the three filter status

lights displays, indicating one of the following:

Filter OK Air filter does not need changing.

Order Filter Air filter is about 80 percent used. Please order new one.

Change Filter Air filter is 100 percent used. Please change now.

2 Press the Air Filter On/Off button to turn off the status light.

TURNING THE COOLING SYSTEM ON AND OFF

You can disable the cooling system in your refrigerator

by pressing the On/Off button located on the left side of

the temperature control panel.

To ensure that you do not accidentally turn off the

cooling system, the button does not work unless you

press and hold it for three seconds.

Once you disable the cooling system, all refrigeration to

the freezer and fresh food compartments stops.

To turn the cooling system back on, you must again

press and hold the On/Off button for three more

seconds.

Air Filter On/Off Button

Indicator Lights

NONO

TETE

See the later section in this Use & Care Guide for instructions on replacing the air filter.

Cooling System On/Off Button

IMPORIMPOR

IMPOR

ANTANT

ANT

The On/Off button only controls your refrigerator’s cooling system. Power to lights and

other electrical components continues unless you unplug the power cord.

Storage Features

CANTILEVER SHELVES

You can easily adjust shelf positions in the freezer and fresh food compartments to

suit your needs. The shelves have mounting brackets, which attach to slotted

supports at the rear of each compartment.

To change the position of a shelf:

1 Before adjusting a shelf, remove all food.

2 Lift the front edge up.

3 Pull the shelf out.

4 Replace by inserting the mounting bracket hooks into

the desired support slots.

5 Lower the shelf and lock into position.

Shelf Features

Your refrigerator includes SpillSafe

glass shelves, which

are designed to catch and hold accidental spills. These

shelves slide out for easy access to food and faster

cleaning.

Sliding shelves can be pulled forward as far as their built-in

stops allow. Sliding shelves cannot be separated from their

mounting brackets.

CACA

UTIONUTION

UTION

To avoid injury from breakage, handle tempered glass shelves carefully.

Cantilever

Glass Shelf

Cantilever

Sliding Glass

Shelf

Cantilever Aspect

Glass Shelf

Storage Features

DRAWERS

Your refrigerator includes a variety of storage drawers.

These drawers usually are located in fixed positions at the

bottom of the fresh food compartment.

Crispers

Crisper drawers are designed for storing fruits, vegetables,

and other fresh produce. Before storing items in a crisper:

• Wash items in clear water and remove excess water.

• Wrap any items that have strong odors or high

moisture content.

Crisper Humidity Control

Crisper drawers include a sliding control for adjusting the humidity inside the

crisper. This feature can extend the life of certain fresh vegetables that keep

longer in high humidity.

Meat Keeper

Some models are equipped with a meat keeper drawer for

short term storage of bulk meat items. This drawer includes

a sliding control for adjusting the temperature inside.

Any meat to be kept longer than two days should be frozen.

If you store fruits or vegetables in this drawer, set it to a

warmer temperature to prevent freezing.

NONO

TETE

Leafy vegetables keep best when stored with the Humidity Control set on Higher Humidity,

or in a drawer without a Humidity Control. This keeps incoming air to a minimum and

maintains maximum moisture content.

Crisper

Meat Keeper

Storage Features

DOORS

Storage Bins

The doors to your freezer and fresh food compartments use a

system of modular storage bins. All of these bins are removable

for easy cleaning. Some of them have fixed positions, while

others can be adjusted to your needs.

Door bins are ideal for storing jars, bottles, cans, and large drink

containers. They also enable quick selection of frequently used

items.

To change the position of an adjustable door bin:

1 Before adjusting a bin, remove all food.

2 Grip the bin firmly with both hands and lift it upward.

3 Remove the bin.

4 Place the bin just above desired position.

5 Lower the bin onto supports until locked in place.

Door Bin With

Tilt Shelf

Storage Features

ACCESSORIES

Tall Bottle Retainer

The tall bottle retainer keeps tall containers in the bin from falling forward

when opening or closing the refrigerator door. To install, snap the ends of

the retainer over the edge of the retainer wall as shown in the illustration.

Special Items Rack

The innovative design of the special items rack allows you to store a six-

pack of drink cans, a bottle of wine, a two-liter soft drink bottle, or a

carton of eggs. To install, slide the special item rack onto the left side of

any shelf as shown in the illustration.

Dairy Compartment

Use the dairy compartment, at the top of the fresh food compartment

door, for short term storage of cheese, spreads, or butter. The dairy

compartment, which includes a lift-up cover, is designed to be warmer

than the open storage area to accommodate these types of food.

Can Rack

The can rack allows you to efficiently and securely store up to six cans of

beverage drink.

Ice Cream Shelf

The ice cream shelf attaches to the top of the ice dispenser container. It

allows storage of both round and rectangular cartons of your favorite ice

cream.

CACA

UTIONUTION

UTION

To avoid errors in your refrigerator’s control system, do not remove the magnet

that is mounted behind the dairy compartment.

Can Rack

Tall Bottle

Retainer

Special

Items Rack

Dairy

Compartment

Ice Cream

Shelf

Automatic Ice & Water Dispenser

USING THE DISPENSER

Your automatic ice & water dispenser includes a control panel, a

drinking glass bay, and two push-paddles for turning on the ice and

water supplies.

Using the dispenser control panel is necessary for the ice dispenser

but not the water dispenser. The control panel also includes options

for lighting, filter monitoring, and increasing the rates of ice making

and freezing.

Dispensing Ice

To operate the ice dispenser, press

an option for crushed or cubed ice

on the control panel. Press a

drinking glass against the

dispensing paddle (as far up as

possible to catch all the ice). To

stop, pull the glass away from the

dispensing paddle.

See details for operating the

dispenser controls on next page.

Dispensing Water

To operate the water dispenser, press a drinking glass against the dispensing

paddle. To stop dispensing water, pull the glass away from the dispensing paddle.

The dispensed water is not cold. For colder water, first add crushed ice or cubes to

your drinking glass.

Drip Tray

A drip tray located at the base of the dispenser bay catches small spills and allows

them to evaporate. This drip tray is removable for easy cleaning.

NONO

TETE

Please do not pour excess water and ice into the drip tray. It does not have a drain.

Automatic Ice & Water Dispenser

USING THE DISPENSER CONTROL PANEL

Cube Button

& Indicator Light

Press button to get cubed ice. Light displays blue.

Press glass against ice dispensing paddle, holding high up to catch

all ice.

Crush Button

& Indicator Light

Press button to get crushed ice. Light displays blue.

Press glass against ice dispensing paddle, holding high up to catch

all ice.

Light Button

& Indicator Light

Press button to turn on dispenser light. Light displays blue.

Press button again to turn off dispenser light.

Dispenser light also turns on automatically when ice and/or water is

dispensed.

Filter Status Button

& Indicator Light

Light displays in one of three possible colors each time the dispenser

is used to show status of water filter:

Green Water filter does not need changing.

Amber Water filter is about 80 percent used.

Please order a new one.

Red Water filter is 100 percent used.

Please change as soon as possible.

After replacing the water filter, reset the filter status by pressing and

holding Filter Status button for 10-15 seconds.

Lock Button

& Indicator Light

The dispenser can be locked to prevent unwanted use.

To lock, press and hold button for 3-5 seconds. Light displays blue.

To unlock, press and hold button for 3-5 seconds until light goes out.

Express Freeze Button

& Indicator Light

Press and hold button for 3-5 seconds to activate faster rate for

freezing food (preserving freshness). Light displays blue.

Press and hold button for 3-5 seconds again to deactivate.

Express Ice

Button

& Indicator Light

Press and hold button for 3-5 seconds to increase ice production for

special occasions, such as parties. Light displays blue.

Press and hold button for 3-5 seconds again to deactivate.

IMPORIMPOR

IMPOR

ANTANT

ANT

The ice maker is turned on at the factory so it can work as soon as you install your

refrigerator. If you cannot connect a water supply, turn the ice maker’s On/Off switch to Off.

Otherwise, the ice maker’s fill valve may be noisy when it attempts to operate without water.

Automatic Ice & Water Dispenser

PRIMING THE WATER SUPPLY SYSTEM

Your refrigerator’s water supply system includes several tubing lines, an advanced

water filter, a distribution valve bank, and a reserve tank to ensure ample supply to

the ice and water dispenser at all times. This system needs to be completely filled

with water when first connected to an external supply line.

To prime the water supply system:

1 Begin filling the tank by pressing and holding a drinking glass against the

water dispenser paddle.

2 Keep the glass in this position until water comes out of the dispenser. It may

take about 1½ minutes.

3 Continue dispensing water for about 3 minutes to flush the system and

plumbing connections of any impurities (stopping to empty the glass as

necessary).

ICE DISPENSER OPERATION & CARE

The ice maker, ice bin, and dispenser feeding mechanism are located in the top of

the freezer compartment. After the refrigerator is installed properly and has cooled

for several hours, the ice maker can produce ice within 24 hours. It can completely

fill an ice bin in about two days.

The ice maker produces 4-6 pounds of ice every 24 hours depending on usage

conditions. Ice is produced at a rate of 8 cubes every 75 to 90 minutes.

CACA

UTIONUTION

UTION

For proper dispenser operation, recommended water supply pressure should fall between

between 1.4 and 6.9 bars. Excessive pressure may cause water filter to malfunction.

NONO

TETE

The water dispenser has a built-in device that shuts off the water flow after 3 minutes of

continuous use. To reset this shutoff device, simply release the dispenser paddle.

CACA

UTIONUTION

UTION

Pushing the dispensing paddle in for more than 4 minutes may cause the dispenser motor

to overload and stop. The overload protector resets automatically after 3-4 minutes.

Page is loading ...

Husqvarna QT5000FX4 User manual

Brand: Husqvarna

Model: QT5000FX4

Category: Side-by-side fridge-freezers

Type: User manual

This manual is also suitable for

241737900

Download PDF

report

Husqvarna QT5000FX4 User manual

This manual is also suitable for

Husqvarna QT5000FX4 User manual

Other documents