Craftsman 917.25010 Assembly and Owner's manual

Brand: Craftsman

Model: 917.25010 Assembly and

Category: Spin bikes

Type: Owner's manual

This manual is also suitable for

U614

ASSEMBLY MANUAL / OWNER’S MANUAL

Important Safety Instructions - Assembly 3

Safety Warning Labels / Serial Number 4

Specications 4

Before Assembly 5

Parts 6

Hardware 7

Tools 7

Assembly 8

Leveling the Bike 14

Moving the Bike 14

Important Safety Instructions 15

Features 16

Console Features 17

Contact Heart Rate (CHR) 20

Operations 22

Adjustments 22

Initial Setup 22

Quick Start / Manual Program 23

 UserProles 23

 ProlePrograms 25

Pausing or Stopping 27

Results 27

GOAL TRACK Statistics 28

Console Setup Mode 30

Maintenance 31

Troubleshooting 33

Warranty 35

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369,

registered in the United States. These marks may be registered in other nations or otherwise protected by common law.

MyFitnessPal

is a registered trademark of its owner.

TABLE OF CONTENTS

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number __________________________

Date of Purchase ____________________

To register your product warranty , go to: www.Nautilus.com/register

Or call 1 (800) 605–3369.

If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458)

Or go to: www.Nautilus.com

IMPORTANT SAFETY INSTRUCTIONS

— ASSEMBLY

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obey the following warnings:

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions.

• Keep bystanders and children away from the product you are assembling at all times.

• Do not connect power supply to the machine until instructed to do so.

• Do not assemble this machine outdoors or in a wet or moist location.

• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafcandexposuretobystanders.

• Some components of the machine can be heavy or awkward. Use a second person when doing the assembly

steps involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

• Set up this machine on a solid, level, horizontal surface.

• Do not try to change the design or functionality of this machine. This could compromise the safety of this machine

and will void the warranty.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use

genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the

warranty.

• Do not use until the machine has been fully assembled and inspected for correct performance in accordance with

the Manual.

• ReadandunderstandthecompleteManualsuppliedwiththismachinebeforerstuse.KeeptheManualforfuture

reference.

• Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.

• Thisproductcontainsmagnets.Magneticeldscaninterferewiththenormaluseofcertainmedicaldevicesat

acloserange.Usersmaycomeintoproximityofthemagnetsintheassembly,maintenance,and/oruseofthe

product. Given the obvious importance of these devices, such as a pacemaker, it is important that you consult with

your medical provider in connection with the use of this equipment. Please consult the “Safety Warning Labels

and Serial Number” section to determine the location of the magnets on this product.

SAFETY WARNING LABELS AND SERIAL NUMBER

FCC Compliance

Changesormodicationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoid

the user’s authority to operate the equipment.

The machine and power supply comply with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Note: This machine and power supply have been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

• Lisez et assimilez tous les avertissements

apposés sur cet appareil.

• Gardez les enfants et les animaux de

compagnie éloignés de cette machine en

tout temps

• Déconseillé aux enfants âgés de

moins de 14 ans.

• Lisez et familiarisez-vous avec le Manuel

du propriétaire et avec tous les

avertissements avant d’utiliser cette

machine.

• Soyez prudent lorsque vous utilisez cet

équipement pour ne pas vous infliger de

graves blessures.

• Cette machine supporte un poids

maximal de 300lbs. (136kg).

• Remplacez toute étiquette

d’avertissement endommagée, illisible

ou manquante.

• La fréquence cardiaque qui s’affiche

sur la console est une approximation

et doit être utilisée seulement à titre

indicatif.

• Read, understand and obey all

warnings on this machine.

• Keep children away.

• Not intended for use by anyone

under 14 years of age.

• Prior to use, read and understand

the Owner’s Manual.

• Injury or death is possible if

Caution is not used while using this

machine.

• The maximum user weight for this

machine is 300 lbs (136 kg).

• Replace any “Caution”, “Warning”

or “Danger” label that is illegible,

damaged, or removed.

• The heart rate displayed is an

approximation and should be used

for reference only.

8002739_B

Serial number

Product

specification

SPECIFICATIONS

41.8” (104cm)

21.6” (55cm)

57.6” (146cm)

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on

ahard,levelsurface.Allowaworkoutareaofaminimum90”x70”(2.3mx1.8m).

Basic Assembly Tips

Follow these basic points when you assemble your machine:

1. Read and understand the “Important Safety Instructions” before assembly.

2. Collect all the pieces necessary for each assembly step.

3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter-

clockwise) to loosen, unless instructed otherwise.

4. When attaching 2 pieces, gently lift and look through the bolt holes to help insert the bolt through the holes.

5. The assembly can require 2 people.

Maximum User Weight: 300 lbs. (136 kg)

Machine Weight: 68.1 lbs. (30.9 kg)

Power Requirements:

 OperationalVoltage:9VDC

Operating Current: 1.5A

Regulatory Approvals:

 ACPowerAdapter: ULlisted,Rated120V60HzInput,

9VDC,1500mAOutput.Class2.

This product, its packaging, and components contain

chemicals known to the State of California to cause

cancer, birth defects, or reproductive harm. This Notice

is provided in accordance with California’s Proposition

65. If you would like additional information, please refer

to our website at www.nautilus.com/prop65.

PARTS

Item Qty Description Item Qty Description

1 1 Main Frame 9 1 Seat Post

2 1 Front Stabilizer 10 1 Adjustment Knob

3 1 Rear Stabilizer 11 1 Seat

4 1 Mast Boot 12 1 Left Pedal (L)

5 1 Console Mast (with Handlebar Mount) 13 1 Right Pedal (R)

6 1 Handlebar Mount Cover 14 1 Water Bottle Holder

7 1 Handlebars 15 1 AC Adapter

8 1 Console 16 1 MP3 Cord

12 (L)

13 (R)

HARDWARE / TOOLS

Tools

Included Not Included

6 mm

(recommended)

Item Qty Description

A 4 ButtonHeadHexScrewM8x16

B 5 Lock Washer M8

C 4 Flat Washer M8

D 1 T-handle

E 1 Flat Washer, Narrow M8

D E

ASSEMBLY

1. Attach Stabilizers to Main Frame

Note: Hardware(*) is pre-installed on the stabilizers and not on Hardware Card. Make sure transport wheels on

the front stabilizer point forward.

2. Install Console Mast and Mast Gasket on Main Assembly

NOTICE: Make sure the Console Cable connector (a) does not fall into the Console Mast. Align the clips on the

cable connectors and make sure the connectors lock. Do not crimp Console Cable.

6 mm

3. Install Handlebars on Console Mast

NOTICE: Do not crimp the cables. Put the Handlebar (7) in the bracket (5a), adjust the Handlebar to the desired

angle, and install the T-handle (D) through the holes. Use the pull cable in the Handlebar Mount to route

the HR cable (7a) through the slot (5b) under the Handlebar Mount to the top of the mast. Fully tighten the

T-handle to keep the Handlebar in position. Push the cover (6) into position on the Handlebar Mount.

4. Install Console on Console Mast

Note: Remove the pre-installed screws(*) from the back of the Console before you connect the cables. If desired,

apply the French Canadian overlay to the Console face.

NOTICE: Do not crimp the cables.

5. Install Seat Post on Frame

NOTICE: Make sure the Adjustment Knob engages the Seat Post.

Do not set the Seat Post position higher than the stop mark (STOP) on the tube.

6. Attach Seat to Seat Post

NOTICE: Be sure the Seat is straight. Tighten the nuts (11b) on the Seat bracket (11a) to hold the Seat in position.

STOP

11a

11b

7. Install Pedals

Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orienta-

tion is based from a seated position on the bike. The Left Pedal has an “L”, the Right Pedal an “R”.

12 (L)

13 (R)

8. Install Water Bottle Holder

Note: The hardware(*) is pre-installed on the Console Mast and not on Hardware Card.

9. Connect AC Adapter

10. Final Inspection

Inspect your machine to ensure that all hardware is tight and components are properly assembled.

Be sure to record the serial number in the field provided at the front of this manual.

Do not use or put the machine into service until the machine has been fully assembled and inspected for correct

performance in accordance with the Owner’s Manual.

Leveling Your Bike

Levelers are found on each side of the Rear Stabilizer. Turn the stabilizer foot to adjust. Make sure the bike is level

andstablebeforeyouexercise.

Moving Your Bike

To move the upright bike, carefully tilt the Handlebars toward you while pushing the front of the bike downward. Push the

bike to the desired location.

NOTICE: Be careful when you move the bike. Abrupt motions can affect the computer operation.

BEFORE YOU START

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Before using this equipment, obey the following warnings:

Read and understand the complete Manual. Keep the Manual for future reference.

Read and understand all warnings on this machine. If at any time the Warning labels become loose, unreadable

or dislodged, contact Nautilus Customer Service for replacement labels.

• Children must not be let on or near to this machine. Moving parts and other features of the machine can be

dangerous to children.

• Not intended for use by anyone under 14 years of age.

• Consultaphysicianbeforeyoustartanexerciseprogram.Stopexercisingifyoufeelpainortightnessinyour

chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the

values calculated or measured by the machine’s computer for reference purposes only.

• Beforeeachuse,examinethismachineforloosepartsorsignsofwear.Donotuseiffoundinthiscondition.

Monitor the Seat, Pedals, and Crank Arms closely. Contact Nautilus Customer Service for repair information.

• Maximumuserweightlimit:300lbs.(136kg).Donotuseifyouareoverthisweight.

• This machine is for home use only.

• Donotwearlooseclothingorjewelry.Thismachinecontainsmovingparts.Donotputngersorotherobjectsinto

movingpartsoftheexerciseequipment.

• Set up and operate this machine on a solid, level, horizontal surface.

• Make the Pedals stable before you step on them. Use caution when you step on and off the machine.

• Disconnect all power before servicing this machine.

• Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals clean and dry.

• Keep at least 24” (0.6 m) on each side of the machine clear. This is the recommended safe distance for access

and passage around and emergency dismounts from the machine. Keep third parties out of this space when

machine is in use.

• Donotoverexertyourselfduringexercise.Operatethemachineinthemannerdescribedinthismanual.

• Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do

not hit the user.

• Exerciseonthismachinerequirescoordinationandbalance.Besuretoanticipatethatchangesinspeedand

resistance level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.

• Prior to use, read and understand the owner’s manual. The appliance is not to be used by persons with functional

limitationsandimpairments,reducedphysical,sensoryormentalcapabilities,orlackofexperienceand

knowledge.

IMPORTANT SAFETY INSTRUCTIONS

FEATURES

A Console J Power Connector

B Handlebars K Water Bottle Holder

C Adjustable Seat L MP3 Input

D Adjustment Knob M USB Port

E Pedals N Contact Heart Rate (CHR) Sensors

F Stabilizers O Speakers

G Levelers P Fan

H Fully Shrouded Flywheel Q Media Tray

I Transport Rollers R MP3 Cord

Console Features

The Console provides important information about your workout and lets you control the resistance levels while you

exercise.TheConsolefeaturestheNautilusDualTrack™displaywithtouchcontrolbuttonstonavigateyouthroughthe

exerciseprograms.

Keypad Functions

Resistance Increase () button- Increases the workout resistance level

Resistance Decrease () button- Decreases the workout resistance level

QUICK START button- Begins a Quick Start workout

USERbutton-SelectsaUserprole

PROGRAMS button- Selects a category and workout program

PAUSE / END button- Pauses an active workout, ends a paused workout, or goes back to the previous screen

GOALTRACKbutton-DisplaystheWorkoutTotalsandAchievementsfortheselectedUserProle

Increase () button- Increases a value (age, time, distance, or calories) or moves through options

Left () button- Displays different workout values during a workout, and moves through options

OKbutton-StartsaProgramworkout,conrmsinformation,orresumesapausedworkout

Right () button- Displays different workout values during a workout, and moves through options

Decrease () button- Decreases a value (age, time, distance, or calories) or moves through options

TIMESPEED DISTANCE LEVEL CALORIESRPM HEART RATE

MPH km/h Hr MIN AVG MILES KM AVG BPM AVG

DISTANCE

LAST 7 DAYS

LAST WORKOUT

CURRENT WORKOUT

QUICK START PAUSE/END

PROGRAMS

GOAL TRACK

USER

100%

Anaerobic

80-90%

Aerobic

70-80%

Fat burn

50-70%

Warm up

Less than

50%

Upper Display

Lower Display

Resistance Level Quick Buttons

Achievement Indicator Lights

Fan

FAN button- Controls 3-speed fan

Resistance Level Quick Buttons- Shifts the resistance levels to the setting quickly during a workout

Achievement Indicator Lights- when a workout result is reviewed, the achievement indicator light will activate

Nautilus Dual Track™ Display

Upper Display Data

Program Display

TheProgramDisplayshowsinformationtotheUserandthegriddisplayareashowsthecourseprolefortheprogram.

Eachcolumnintheproleshowsoneinterval(workoutsegment).Thehigherthecolumn,thehighertheresistancelevel.

Theashingcolumnshowsyourcurrentinterval.

Intensity Display

The Intensity Display shows the level of work at that moment based on the current resistance level.

Heart Rate Zone Display

The Heart Rate Zone shows which zone the current heart rate value falls into for the current User. These Heart Rate

Zones can be used as a workout guide for a certain target zone (anaerobic, aerobic, or fat burn).

Consultaphysicianbeforeyoustartanexerciseprogram.Stopexercisingifyoufeelpainortightnessinyourchest,

become short of breath, or feel faint. Contact your doctor before you use the machine again. The heart rate

displayedisanapproximationandshouldbeusedforreferenceonly.

Note: If no heart rate is detected, the display will be blank.

Goal Display

The Goal Display shows the currently selected type of goal (Distance, Time or Calories), the current value to achieve the

goal, and the percent completed toward the goal.

User Display

TheUserDisplayshowswhichUserProleiscurrentlyselected.

TIMESPEED DISTANCE LEVEL CALORIESRPM HEART RATE

MPH km/h Hr MIN AVG MILES KM AVG BPM AVG

DISTANCE

LAST 7 DAYS

LAST WORKOUT

CURRENT WORKOUT

QUICK START PAUSE/END

PROGRAMS

GOAL TRACK

USER

100%

Anaerobic

80-90%

Aerobic

70-80%

Fat burn

50-70%

Warm up

Less than

50%

User Display

Achievement Display

Program Display

Achievement Display

The Achievement Display activates when a workout goal is reached or a workout milestone is surpassed from past

workouts. The Console display will congratulate and inform the User of their achievement, along with a celebratory sound.

Lower Display Data

TheLowerDisplayshowstheWorkoutValuesandcanbecustomizedforeachUser.(Consultthe“EditUserProle”

section of this manual.)

Speed

TheSpeeddisplayeldshowsthemachinespeedinmilesperhour(mph)orkilometersperhour(km/h).

Time

TheTIMEdisplayeldshowsthetotaltimecountoftheworkout,theaverageTimefortheUserProle,orthetotalopera-

tional time of the machine.

Note: If a Quick Start workout is performed for more than 99 minutes and 59 seconds (99:59), the units for Time will shift

to hours and minutes ( 1 hour, 40 minutes ).

Distance

The Distance display shows the distance count (miles or km) in the workout.

Note: To change the measurement units to English Imperial or metric, refer to the “Console Setup Mode” section in this

manual.

Level

TheLEVELdisplayshowsthecurrentresistancelevelintheworkout.

RPM

TheRPMdisplayeldshowsthemachinerevolutionsperminute(RPM).

Heart Rate (Pulse)

The Heart Rate display shows the beats per minute (BPM) from the heart rate monitor. When a heart rate signal is re-

ceivedbytheConsole,theiconwillash.

Consultaphysicianbeforeyoustartanexerciseprogram.Stopexercisingifyoufeelpainortightnessinyourchest,

become short of breath, or feel faint. Contact your doctor before you use the machine again. The heart rate

displayedisanapproximationandshouldbeusedforreferenceonly.

Calories

TheCaloriesdisplayeldshowstheestimatedcaloriesthatyouhaveburnedduringtheexercise.

TIMESPEED DISTANCE LEVEL CALORIESRPM HEART RATE

MPH km/h Hr MIN AVG MILES KM AVG BPM AVG

DISTANCE

LAST 7 DAYS

LAST WORKOUT

CURRENT WORKOUT

QUICK START PAUSE/END

PROGRAMS

GOAL TRACK

USER

100%

Anaerobic

80-90%

Aerobic

70-80%

Fat burn

50-70%

Warm up

Less than

50%

Export Workout Results to USB Drive

This Nautilus

tness machine is equipped with a USB Port and can export your Workout Results to a USB Drive. With the Workouts exported

from the tness machine, connect the USB Drive to a computer and upload the le to your Nautilus Connect™ account.

To export the GOAL TRACK statistics of a User Prole:

1. From the Power-Up screen, push the USER button to select a User Profile.

2. Push the GOAL TRACK button. The Console will display the LAST WORKOUT values and activate the corresponding Achievement light.

3. Push the Decrease() button to move to the “CLEAR WORKOUT DATA -OK?” prompt.

4. Push the Decrease() button to move to the “SAVE TO USB - OK?” prompt. Push OK, and the “ARE YOU SURE? -NO” prompt will display.

Push the Increase() button to change it to yes and push OK. The Console will display the “INSERT USB” prompt. Insert a USB Flash

Drive into the USB Port. The Console will record the Statistics to the USB Flash Drive.

The Console will display “SAVING”, and then “REMOVE USB” when it is safe to remove the USB Flash Drive.

Note: Push the PAUSE/END button to force an exit from the “SAVING” prompt.

5. Push GOAL TRACK to return to the Power-Up screen.

Track Your Results at www.nautilusconnect.com

Take advantage of Nautilus Connect™ to see your progress over time and share your data with MyFitnessPal

. Review your workouts and

results away from the machine when convenient for you. Nautilus Connect™ allows for a workout value to be selected and have it graphed for

weekly, monthly, or yearly comparison review.

1. Insert the USB Drive with your workout data into a device connected to the internet.

2. Sign in to Nautilus Connect™.

3. Click the Upload button on the web site.

4. In the Upload File window, locate your USB Drive. Select the workout data le from it, and click the upload button. Your workout data will

upload into your account.

5. To sync your workout data with MyFitnessPal

, select the Menu option in the upper left corner of the web page and select the “Sync to

MyFitnessPal

” option.

Note: Nautilus Connect™ will automatically sync your workouts with MyFitnessPal

after the initial syncing.

A User’s Guide can be found online at www.nautilusconnect.com.

Contact Heart Rate Sensors

Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless

steel parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch

boththetopandthebottomofthesensors.Holdrm,butnottootightorloose.Bothhandsmustmakecontactwith

the sensors for the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate

will be shown.

Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will

nowvalidatetheheartrate.Manyfactorsinuencetheabilityofthesensorstodetectyourheartratesignal:

• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can inter-

fere with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.

• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.

• Some Electrocardiogram (EKG) signals generated by individuals are not strong enough to be detected by the

sensors.

• Theproximityofotherelectronicmachinescangenerateinterference.

Page is loading ...

Craftsman 917.25010 Assembly and Owner's manual

Brand: Craftsman

Model: 917.25010 Assembly and

Category: Spin bikes

Type: Owner's manual

This manual is also suitable for

U614

Download PDF

report

Craftsman 917.25010 Assembly and Owner's manual

This manual is also suitable for

Craftsman 917.25010 Assembly and Owner's manual

Other documents