Quantum Quantum QNVR User manual

Installation and User manual

QNVR

Quantum IP Network Video Recorder

2

QNVR Installation Manual V1.2

QNVR installation and user manual

3

QNVR Installation Manual V1.2

QNVR installation and user manual

CE Information

The product must be installed according to the currently valid installation regulat

ions for EMC to guarantee the designed use and to prevent EMC problems.

The device supplied with this manual meets the requirements of the following E

C Directives: EMC: 2004/108/EC, LVD : 2006/95/EC and RoHS: 2011/65/EU

Safety Precautions

1. Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

2. WARNING – TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE

SET TO RAIN OR MOISTURE.

3. "IMPORTANT SAFETY INSTRUCTIONS"

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any of the ventilation openings. Install in accordance with the

manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug.

A polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong is provided for your safety. When the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

WARNING

This is a Class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

4

QNVR Installation Manual V1.2

QNVR installation and user manual

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use the attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart

is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods

of time.

14) Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power supply cord

or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15) the apparatus shall not be exposed to dripping or splashing and that no

objects filled with liquids, such as vases, shall be placed on the apparatus.

16) Shall be connected to a MAINS socket outlet with a protective earthing

connection.

17) the disconnect device shall remain readily operable.

18) The socket-outlet shall be installed near the equipment and shall be easily

accessible.

4. Explanation of Safety Related Symbols

WARNING

Hazardous moving parts

Keep away from moving fan blades

5

QNVR Installation Manual V1.2

QNVR installation and user manual

Contents

OVERVIEW ........................................................................................................................... 7

1. CONTENTS OF PACKING .................................................................................................... 7

2. FEATURES ....................................................................................................................... 8

INSTALLATION .................................................................................................................... 9

1. FRONT PANEL CONTROLS ................................................................................................. 9

2. REAR PANEL CONNECTORS ............................................................................................. 11

3. REMOTE CONTROL ..........................................................................................................13

4. CONNECTION GUIDE ........................................................................................................14

5. TURNING ON THE NVR ....................................................................................................16

OPERATION ........................................................................................................................17

1. NAVIGATION ....................................................................................................................17

1-1. Mouse Control ........................................................................................................................................ 17

1-2. Menu Navigation .................................................................................................................................... 17

2. SCREEN DISPLAYS ..........................................................................................................18

2-1. OSD Description ..................................................................................................................................... 18

2-2. Select Channel ....................................................................................................................................... 18

2-3. Digital Zoom ........................................................................................................................................... 19

3. PLAYBACK ......................................................................................................................20

3-1. OSD Description ..................................................................................................................................... 20

3-2. Playback Control .................................................................................................................................... 21

3-3. Playback Search .................................................................................................................................... 22

4. PTZ CONTROL VIA RS485 ...............................................................................................23

4-1. PTZ Control by mouse ............................................................................................................................ 23

4-2. PTZ Control by remote keyboard ........................................................................................................... 25

4-3. PTZ Control by remote controller ........................................................................................................... 25

4-4. PTZ Control by Client software ............................................................................................................... 25

SETUP MENU ......................................................................................................................26

1. DISPLAY .........................................................................................................................26

1-1. OSD Setting ........................................................................................................................................... 26

1-2. Live Setting ............................................................................................................................................. 28

1-3. Camera Covert ....................................................................................................................................... 28

1-4. Camera Name ........................................................................................................................................ 29

2. IP CAMERA SET UP, FOR LIVE VIEWING AND RECORDING.....................................................30

2.1 Camera Discovery and Connection ......................................................................................................... 31

2.2 Constant record setup ............................................................................................................................. 32

2.3 Event Boost record setup ........................................................................................................................ 32

2.4 Stream Switching record setup ................................................................................................................ 33

2-5. IP CAMERA menu overview ................................................................................................................... 34

2-6. Normal (Time Lapse) .............................................................................................................................. 35

2-7. Alarm ...................................................................................................................................................... 36

2-8. Motion ..................................................................................................................................................... 37

2-9. Schedule ................................................................................................................................................ 39

3. SYSTEM ..........................................................................................................................41

3-1. Basic ....................................................................................................................................................... 41

3-2. Disk ........................................................................................................................................................ 43

3-3. Account................................................................................................................................................... 44

3-4. Program Update ..................................................................................................................................... 45

3-5. PTZ Setup .............................................................................................................................................. 46

3-6. More ....................................................................................................................................................... 46

4. NETWORK .......................................................................................................................47

4-1. Basic ....................................................................................................................................................... 47

6

QNVR Installation Manual V1.2

QNVR installation and user manual

4-2. NTP ........................................................................................................................................................ 48

5. EVENT ............................................................................................................................49

5-1. E-Mail Registration ................................................................................................................................. 49

5-2. E-mail Out .............................................................................................................................................. 50

5-3. Beep Out ................................................................................................................................................ 51

5-4. Alarm Out ............................................................................................................................................... 51

SEARCH MENU ...................................................................................................................52

1. SEARCHING RECORDED DATA ..........................................................................................52

1-1. Date/Time Search................................................................................................................................... 52

1-2. Event Search .......................................................................................................................................... 53

1-3. Calendar Search .................................................................................................................................... 53

1-4. Bookmark Search ................................................................................................................................... 54

2. ARCHIVING EVIDENCE TO DVD/CD OR USB .....................................................................55

3. LOG ..............................................................................................................................57

CLIENT VIEWER SOFTWARE ............................................................................................58

1. CONNECTION ..................................................................................................................58

2. LOGGING ON ...................................................................................................................59

3. EXPLANATION OF SCREEN BUTTONS ................................................................................60

4. LIVE MONITORING ...........................................................................................................61

5. REMOTE SEARCH ............................................................................................................65

5-1. Search .................................................................................................................................................... 65

5-2. Archive.................................................................................................................................................... 67

5-3. Remote Log ............................................................................................................................................ 69

5-4. Information ............................................................................................................................................. 69

6. REMOTE SETUP (MENU SETTINGS - SAME AS DVR) ...........................................................71

6-1. Display .................................................................................................................................................... 71

7-2. IP Camera .............................................................................................................................................. 73

7-3. System ................................................................................................................................................... 75

7-4. Event ...................................................................................................................................................... 77

8. LOCAL SEARCH (VIEWING DOWNLOADED FOOTAGE) ...........................................................79

8-1. Search .................................................................................................................................................... 79

8-2. Log ......................................................................................................................................................... 81

8-3. Info ......................................................................................................................................................... 81

9. LOCAL SETUP .................................................................................................................82

9-1. Global ..................................................................................................................................................... 82

9-2. Opacity ................................................................................................................................................... 82

9-3. Audio Buffer ............................................................................................................................................ 83

9-4. Camera Name ........................................................................................................................................ 83

9-5. Deinterlace ............................................................................................................................................. 83

10. TELEMETRY CONTROL (PAN/TILT/ZOOM/FOCUS) .............................................................84

10-1. Pan / Tilt / Zoom / Focus ...................................................................................................................... 84

10-2. Preset / Learn ....................................................................................................................................... 85

11. SCREEN POSITION SAVE/LOAD .......................................................................................86

11-1. Screen Position Save ........................................................................................................................... 86

11-2. Screen Position Load ............................................................................................................................ 86

12. FIRMWARE UPGRADE ....................................................................................................87

APPENDIX 1 ........................................................................................................................88

DYNAMIC IP (SUPPORTING DDNS SERVER) .........................................................................88

APPENDIX 2 ........................................................................................................................90

SETUP FOR DVR PORT & WEB SERVER PORT USING IP SHARING ROUTER ...............................90

APPENDIX 3 ........................................................................................................................91

SPECIFICATION ...................................................................................................................91

7

QNVR Installation Manual V1.2

QNVR installation and user manual

Overview

1. Contents of Packing

Mouse

Power Cable

User Manual

Remote Controller

Battery

(AAA x2)

Installation

CD

8

QNVR Installation Manual V1.2

QNVR installation and user manual

2. Features

● Convenience

- User-friendly GUI (Graphical User Interface)

- Easy-to-use menu structure

- Easy-to-use recorded data search (Time, Date, Motion, and Alarm)

- Easy-to control via Front Panel, IR remote control and USB 2.0 mouse.

● Stability

- Auto restart after power interruption

- DB structure offers data stabilisation and better storage utilisation

● Expandability

- Remote NVR’s can be controlled using the supplied software client viewer.

● Technology

- Embedded LINUX OS

- Multi-Decoding (H.264/MPEG4/JPEG)

- High-resolution & high-quality H.264 algorithm

- Uses watermarking & scrambling technologies,

● Functionality

- Variable recording function (normal, alarm, motion, schedule)

- RS485 Telemetry

- Full channel real-time monitoring

- Live monitoring, recording, playback, backup, remote access simultaneously

- Multi channel playback

- Variable events notification to e-mail, buzzer or PC Client system

9

QNVR Installation Manual V1.2

QNVR installation and user manual

①②③④ ⑤ ⑥ ⑦ ⑧ ⑨

⑩⑪⑫ ⑬ ⑭ ⑮

Installation

1. Front Panel Controls

① Volume Up & Down ( / )

To increase or decrease the volume.

② Audio Selection

Switches through audio channels

③ Multi-screen Display

Use the Multi-screen display button to select the display mode (single/4/9/16way).

④ PTZ Channel Selection

Used to select the PTZ channel on multi-screen.

⑤ Menu

Displays the menu on the screen

⑥ Indicator

- POWER: System Power On/Off (When power is on, the green light will be illuminated)

- REC: Recording status (When recording is on, the red light will flash)

- NET: Network status (When network is connected, the light will lash)

- HDD: HDD status (When the system is reading or writing to the HDD, the light will flash)

⑦ Search

Entering search mode

⑧ Stop / Eject (■)

10

QNVR Installation Manual V1.2

QNVR installation and user manual

To stop playback and go back to live mode. To eject DVD-RW

Pause ( ▌▌)

To freeze picture on playback mode and live mode.

Forward Play (▶)

Playback of the recorded data. When in play mode press again to enter fast forward mode.

When video is paused this allows frame forward.

Reverse Play / Rewind ()

Reverse play of recorded data. When in play mode press again to enter fast rewind mode.

When video is paused this allows frame forward

Rec (●)

It starts & stops manual recording, password protected.

⑨ Power

System Power On/Off (Password protected)

⑩ Pan / Tilt

To enable the pan & tilt of PTZ cameras, a “T” will appear in the task bar at the bottom of

the screen

⑪ Arrow Buttons

Moves the cursor while in menu mode

Pan and tilt in telemetry mode

Play forward / backwards in play mode

⑫ Select

Menu selection

⑬ Zoom

To control the zoom in & out of PTZ camera

⑭ Numeric & Character

Input for numbers & letters within the setup menus and searches

⑮ USB Port

USB connector for mouse control & downloading to USB memory.

11

QNVR Installation Manual V1.2

QNVR installation and user manual

2. Rear Panel Connectors

① Network Port for NAS

Will allow for Archiving across the network to a NAS device ( Not currently operational,

for future development)

② HDMI Output

HDMI output port (1080p)

③ VGA Output

VGA video output for main monitor (1024x768 to 1920x1080)

④ Audio Output

Audio output

⑤ Network Port for PC Client

Connecting to the PC through Internet or LAN

⑥ Network Port for IP camera

Connecting to IP cameras on a LAN

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑪

⑫

⑬

⑭

12

QNVR Installation Manual V1.2

QNVR installation and user manual

⑦ USB Port

USB 2.0 port for mouse, USB storage

⑧ RS232 Port

Serial Communication (for service)

⑨ E-SATA Port

Port for e-SATA HDD

⑩ PTZ Camera Controller

Serial Communication for Pan / Tilt Camera

⑪ Keyboard Controller

Serial Communication for P/T/Z Control Keyboard

⑫ Alarm Output

Alarm(relay) output port

⑬ Sensor Input

16 Sensor input ports

⑭ AC Power Input

AC 100-240V 50/60Hz

13

QNVR Installation Manual V1.2

QNVR installation and user manual

3. Remote Control

① POWER : Power on/off

② P/T/Z : Entering PTZ Setup menu directly

③ REC : Start & Stop Recording

④ Numbers and letters (1 to 9)

⑤ INFO : Direct access system infomation

ID : Entering remocon ID set mode

MUTE : Audio Mute

AUDIO : Switches through Audio channels

⑥ MENU: Entering system menu

SEARCH: Entering search

ARROW : Left, Right, Up and Down

SEL : Select/Enter

⑦ VOL +/- : Up, down volume

⑧ CH +/- : Up, down channel

⑨ (◀)◀ : Reverse play

▶(▶) : Play (or fast forward)

I I : Pause

■ : Stop playback

⑩ OSD : On Screen Display ON/OFF

SEQ : Sequence operation

LOG : Direct access Log list

⑪ CAM : Changing PTZ icon

P/T : Pan &Tilt

Z/F : Zoom/ & Focus

DIS : Channel Division

⑩

①

②

③

④

⑤

⑥

⑧

⑨

⑦

⑪

14

QNVR Installation Manual V1.2

QNVR installation and user manual

4. Connection Guide

Connecting the monitor

There are two available monitor outputs on NVR.

● HDMI output : Connect to the HDMI port of the HD monitor(HDTV).

● VGA output : Connect to the VGA port of the VGA monitor.

Connecting to a network

Use the Ethernet port to connect to remote PC, IP cameras and NAS via Ethernet network.

● Port for PC Client: Connect to the PC. (Default: 192.168.1.111)

● Port for IP Camera: Connect to IP camera network. (Default: 192.168.30.222)

● Port for NAS (for future development): Will allow connection to the network storage for

archiving only. This can share either of the above sub-nets or be on a third independent

sub-net (default 192.168.30.223).

Important: The PC port and IP camera port must not be on the same subnet.

15

QNVR Installation Manual V1.2

QNVR installation and user manual

Connecting audio

To listen to live or recorded audio, connect to an amplified speaker system.

● Audio output : Connect to the audio in of the audio AMP.

Connecting to a sensor input

There are 16 individual alarm inputs marked as Sensor In (1-16).

● Sensor inputs : Connect to (+) terminal of a sensor.

● Common GND : Connect to (–) terminals of sensors.

Connecting to a alarm output

The NVR can activate external devices such as buzzers or lights using the relay.

There are 4 relay outputs marked as Alarm out.

● A1/A2/A3/A4 : Connect to (+) terminal of buzzer or light.

● B1/B2/B3/B4 : Connect to (–) terminals of buzzer or light.

Connecting to a PTZ camera

This RS485 connector can be used to control Pan / Tilt / Zoom camera.

● Telemetry (+) : Connect to RS485 Rx(+) of PTZ camera.

● Telemetry (-) : Connect to RS485 Rx(-) of PTZ camera.

Alarm

Outputs

Common

GND

Sensor

Inputs

Common

GND

(-)

(+)

16

QNVR Installation Manual V1.2

QNVR installation and user manual

Connecting to a remote keyboard (VKBD4)

This RS485 connector is for a control keyboard.

● Keyboard (+) : Connect to RS485 Tx(+) of the keyboard.

● Keyboard (-) : Connect to RS485 Tx(-) of the keyboard.

Connecting to a mouse

● USB 2.0 : Connect to the mouse.

Connecting to a external HDD

To expand the HDD capacity, connect the external storage.

● e-SATA : Connect to the e-Sata HDD storage.

5. Turning on the NVR

1. Connect the power cable.

2. Connect camera cables.

3. Connect a network cable and a monitor cable.

4. Press the POWER button on the front panel and wait until the main screen is displayed on

the connected monitor; this process may take a couple of minutes.

(+)

(-)

17

QNVR Installation Manual V1.2

QNVR installation and user manual

Operation

1. Navigation

You can navigate the on screen menus using the front panel buttons, IR remote control or

mouse.

1-1. Mouse Control

Right clicking the mouse brings up the following popup menu.

① Setup Menu

② Search Menu

③ PAN/Tilt Menu

④ Focus/Zoom Menu

⑤ Power Button

⑥ Sequence Button

⑦ Playback Button

⑧ Eject Button

⑨ Volume Up/Down Button

⑩ Multi-screen Display Button

⑪ Channel Up/Down Button

1-2. Menu Navigation

To enter the Setup menu, the user has to have the required access rights and be logged on.

Press the Menu button or right click with mouse on screen and select the menu icon.

The following screen will be displayed asking for password.

① Select the user ID.

② Enter the password.

The default password is 00000000(8 zeros).

③ Press OK, the setup menu will be displayed

on screen.

All menus are navigated around using the Left/

Right/ Up/ Down and the Select button or mouse.

To step back out of the menus, press MENU button

or click the right button of the mouse.

①

②

③

⑦

⑨

⑪

⑤

⑧

⑩

①

③

⑥

⑨

⑪

②

④

18

QNVR Installation Manual V1.2

QNVR installation and user manual

2. Screen Displays

2-1. OSD Description

The Status Bar on screen shows HDD capacity, network connection, current time, etc.

① HDD capacity: Used capacity / Duration

② Multi-screen Display icons : Single/ 4/ 9/ 16way

③ e-SATA connection

④ USB memory connection

⑤ Mouse connection

⑥ Network connection

⑦ Current Date/Time

2-2. Select Channel

Use the Multiscreen display button ( ) on the popup menu to select the display mode.

Single Channel 4 Channel 9 Channel

Live 1ch Live 4ch Live 9ch

16 Channel

Live 16ch

Also you can use the DIS button on the remote controller to change the display mode.

①

⑤

⑦

②

③

⑥

④

19

QNVR Installation Manual V1.2

QNVR installation and user manual

Display switches in the following order when the DIS button is pressed.

Single Channel  4 Channel  9 Channel  16 Channel  Single Channel

2-3. Digital Zoom

When the system is in full-screen mode, drag your mouse in the screen to select a section

and then left click mouse to realize digital zoom.

You can right click mouse to exit.

20

QNVR Installation Manual V1.2

QNVR installation and user manual

3. Playback

Click the right button on the mouse, the popup menu will be displayed on screen.

To begin playback, press the Play button on the popup menu:

3-1. OSD Description

The Control Bar on screen shows Playback control buttons, Progress bar, Display mode

buttons, Playback time, etc.

① Previous/ Next time buttons ⑨ Reverse Slow Play button

② Time Bar ⑩ Slow Play button

③ Playback Speed Display ⑪ Replay button

④ Display mode buttons(1/4/9/16ch) ⑫ Add Bookmark button

⑤ Stop button ⑬ Search Bookmark button

⑥ Pause button ⑭ Quick Archive button

⑦ Reverse Play button ⑮ Playback Date & Time

⑧ Play button

④

⑫

⑬

③

⑮

⑭

①

②

⑩

⑧

⑥

⑤

⑦

⑨

⑪

Page is loading ...

Quantum Quantum QNVR User manual

This manual is also suitable for

Quantum Quantum QNVR User manual

Other documents