Replacement Power Reset LED Wire Kit for ATX Case Front Bezel
StarTech ID: BEZELWRKIT
This Power/Reset LED wire kit is suitable for replacing burnt out LEDs and switches on a PC (ATX) Case Front
panel.
The five-piece kit comes with two switches (Power, Reset) and three LEDs (Power, Hard Drive Activity, Sleep).
Each switch and LED is clearly labeled to make installation easy.
The replacement Power/Reset LED wire kit offers a cost-effective way to keep your ATX computer case working
the way it did when first purchased, without the expense of a new case.
Applications
System maintenance
Features
Five piece kit
Two case switches included (power & reset)
Three case LEDs included (Power, Hard Drive Activity and sleep)
Labelled motherboard connectors
www.startech.com
1 800 265 1844
Technical Specifications
Warranty Lifetime
Motherboard Connectors Power LED(3-pin)
Sleep LED(2-pin)
HDD LED(2-pin)
Power Switch(2-pin)
Reset Switch(2-pin)
Switches 1 x Power
1 x Reset
Product Length 20 in [508 mm]
LED Indicators 1 - HDD Activity (Green)
LED Indicators 1 - Power(Green)
LED Indicators 1 - Sleep (Yellow)
Shipping (Package) Weight 0.1 lb [0 kg]
Included in Package 1 - Power Switch
Included in Package 1 - Reset Switch
Included in Package 1 - Yellow LED
Included in Package 2 - Green LED
Certifications, Reports and Compatibility
www.startech.com
1 800 265 1844
/
