jbc CSR245 is a cartridge exchanger designed for use in automatic soldering processes, compatible with JBC TRA245/TRA470 soldering tools and R245 cartridges. It features four grippers to hold cartridges, adjustable work position, and can be integrated with JBC's centering jigs for precise alignment with the soldering tool.
jbc CSR245 is a cartridge exchanger designed for use in automatic soldering processes, compatible with JBC TRA245/TRA470 soldering tools and R245 cartridges. It features four grippers to hold cartridges, adjustable work position, and can be integrated with JBC's centering jigs for precise alignment with the soldering tool.
CSR245/CSR470
General/Heavy Duty
Cartridge Exchanger for Robot
INSTRUCTION MANUAL
2
General/Heavy Duty
Cartridge Exchanger for Robot ..................... 1 unit
according purchased reference
Manual .................................................. 1 unit
Ref. 0027877
Packing List
Either Ref. CS2R245-B or Ref. CS2R470-B is included:
Upper Center Jig ............................. 1 unit
Ref. 0023652 for CS2R245-B
Ref. 0023648 for CS2R470-B
Lower Center Jig ............................................... 1 unit
Ref. 0029067 for CS2R245-B
Ref. 0029055 for CS2R470-B
This manual corresponds to the following references:
- CS2R245-B for R245 cartridges
- CS2R470-B for R470 cartridges
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
3
Grippers
Features
Gripper Activation
Fluid Air
Applicable tubing Ø 4mm
Operating pressure 1,5 to 7 bar
Tube connection to fix Cartridge.
Tube connection to release Cartridge.
CSR245 and CSR470 are designed to be used
in automatic soldering processes. Two pairs of
grippers can be used to hold the cartridges while
they are not in use.
They can work in combination with JBC Automatic
Soldering Tools (TRA245/TRA470) and the
cartridges for automated processes (R245 and
R470).
Assembly
CSR245 and CSR470 need to be fixed to the robot work place area. Use a DIN912 M6 screw and
the mounting hole as shown bellow.
The grippers must be connected to an air-circuit, by using the tube connections A and B, to be
actuated.
A
B
A
B
Mounting
Holes
A
B
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
4
Compatible Cartridges
Find the Cartridge models that best suit your soldering needs on www.jbctools.com
Compatibility
Cartridge
Exchanger
Cartridge Range Control Unit Soldering Tools
R245 R470 UCR245 UCR470 TRA245 TRA470
CSR245
CSR470
Chisel Pin / Connector Drag
Work Position Adjustment
CSR245 and CSR470 bodies can be pivoted 35º to both sides to suit the inclination of your soldering
head in every job necessities. Use a 5mm allen key to loosen the bolt and pivot the cartridge
exchanger body manually.
Note: The angle indicator around the bolt area helps to adjust the desired angle position. Tighten
the bolt for holding the body in the desired position. The soldering head must be set to the same
angle.
Angle Indicator
Bolt
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
5
Tool Position Adjustment
Use an 1,5 mm allen key to loosen the three
indicated screws.
Evenly pull the plate holder and revome the
cartridge plates.
The cartridge plate can be set to four different
positions.
The flat faces of the plate and the cartridge
must match.
Insert the cartridge plates to any of the four
positions you need.
The smaller squared shape must face
upwards.
Assemble the plate holder to its initial position
and tighteen the three screws evenly.
Cartridge Plate
Flat Face
Bolt
Plate Holder
Pos. 1
Pos. 4
Pos. 3
Pos. 2
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º
30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
30º 30º
20º 20º
10º 10º
6
Centering Jig
Instal, as shown, the lower centering jig into
the gripper of CSR245/CSR470 and the and
upper centering jig into the soldering tool.
Adjust the soldering tool position until the
centering jigs are aligned.
It must be possible to move in and out
smoothly.
Insert the upper centering jig completely into
the lower centering jig.
Set this point as the pick-up point position.
From this point on, the soldering tool should
do a linear movement when inserting or
removing cartridges.
In order to align CSR245 and CSR470 to the soldering tool and set the cartridge pick-up points use
JBC´s centering jigs.
Upper
Centering Jig
Lower
Centering Jig
Soldering
Tool
Centering
Jigs
move in / out
smoothly
Upper
Centering Jig
100
3.94
95
3.74
74,5
2.93
53,6
2.11
10
0.39
1,6
0.06
32,5
1.28
37
1.45
29,6
1.17
50
1.97
8,2
0.32
(in)
mm
060921
CS2R470-B
CARTRIDGE STAND FOR ROBOT
SCALE
ISO 2768-f
CS2R470-B
1:1
DIMENSIONS IN
MILLIMETERS
DIN
RoHS
Compliant
GENERAL
TOLERANCES
A3
DRAWN BY
A. Santaeularia
7438
3035
INSPECT. GUIDELINE
TECHNICAL DOC.
92609
06/09/2021
COMPATIBLE
DATE
DIMENSIONES GENERALES
SUBSTITUTES
DESCRIPTION
SOPORTE CART. R470 CAB.ROB.-B
ADDITIONAL DESCRIPTION
PART NUMBER
DRAWING No.
CONFIDENTIAL:
OR PASSED TO ANY THIRD PARTY, IN WHOLE OR IN PART, WITHOUT WRITTEN AUTHORIZATION FROM JBC Soldering, S.L.
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION THAT CANNOT BE USED, COPIED, DISTRIBUTED, REPRODUCED
7
Dimensions
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Workplace Example
8
Work Place Examples
HA Automatic Soldering Set for Robot
HM Soldering Set for Robot
9
Maintenance
- Before carrying out maintenance, always unplug the equipment.
- Use a damp cloth to clean the equipment. Alcohol can only be used to clean the metal parts.
- Periodically check that the metal parts of the equipment are clean.
- Periodically check all cables and tube connections.
- Replace any defective or damaged part. Use original JBC spare parts only.
- Repairs should be performed only by a JBC authorized technical service.
- Under normal operating conditions, the air gripper lifespan is 10 million cycles. It is recommended
to replace it at the end of its lifespan.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
10
It is imperative to follow safety guidelines to prevent electric shock,
injury, fire or explosion.
- Do not use the equipment for any other purpose.
- Do not leave the appliance unattended when it is on.
- Be sure that the power supply is disconnected before changing any spare part.
- The temperature of accessible surfaces may remain high after the unit is turned off. Handle with
care.
- Heat can cause inflamable products to ignite even when not visible.
- Avoid flux coming into contact with skin or eyes to prevent irritation.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste, which can cause burns.
Safety
Notes
11
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0027877-041022
Specifications
CSR245
General Cartridge Exchanger for Robot
Ref.: CS2R245-B
- Operating pressure 1,5 - 7 bar / 20 - 100 psi
- Total Net Weight: 789 g / 1.74 lb
- Package Dimensions/Weight: 221 x 136 x 126 mm / 1004 g
(L x W x H) 8.70 x 5.35 x 4.96 in / 2.21 lb
CSR470
Heavy Duty Cartridge Exchanger for Robot
Ref.: CS2R470-B
- Operating pressure 1,5 - 7 bar / 20 - 100 psi
- Total Net Weight: 807 g / 1.78 lb
- Package Dimensions/Weight: 221 x 136 x 126 mm / 1045 g
(L x W x H) 8.70 x 5.35 x 4.96 in / 2.30 lb
Complies with CE standards.
ESD safe.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
jbc CSR245 is a cartridge exchanger designed for use in automatic soldering processes, compatible with JBC TRA245/TRA470 soldering tools and R245 cartridges. It features four grippers to hold cartridges, adjustable work position, and can be integrated with JBC's centering jigs for precise alignment with the soldering tool.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
jbc RBA User manual
-
jbc CDP User manual
-
-
-
jbc UCR User manual
-
-
-
-
-
jbc CDS Owner's manual
Other documents
-
ROBOTIQ AirPick UR eSeries User manual
-
JBC Tools H0511 User manual
-
Kathrein ZAS 186 User manual
-
ABB IRB 1600 - 5/1.45 User manual
-
Honeywell EVN2000 Series User manual
-
Cub Cadet 17RICBYA010 User manual
-
Acclaim Lighting LINEAR ONE EXTERIOR User guide
-
-
Aruba AP-ANT-86D Datasheet
-
Troy-Bilt 13A8A9BS066 User manual
