2. River of Goods
  3. 20631
20631

River of Goods 20631 User manual

  • I've reviewed the assembly instructions for the lamp. This document provides step-by-step guidance on how to install the wall-mounted lamp, including details about attaching the wall box, connecting the tubes, securing the lamp shade, and bulb installation. It also includes essential safety precautions. I am ready to answer your questions.
  • What should I refer to for maximum wattage?
    Can I replace the bulb while the lamp is plugged in?
    What should I use to clean the lamp?
ASSEMBLY INSTRUCTION
CAUTION - Refer to the wattage caution label located near the lamp holder for maximum
wattage - do not exceed the maximum wattage.
WARNING - Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle
CARE INSTRUCTIONS - Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
MADE IN CHINA
E26 Type A.40W X 1 (Not included)
E26 CFL 13W X 1 (Not included)
1. Attach the wall box to the wall by using two
mounting screws(A).
2. Secure the hidden line tube to wall box with two
mounting screws(B).
3. Connect tube (G) to (F) to the light body ,then
carefully pull out excess wire from tube (G) while
assembling to prevent the cord from becoming
twisted and snagged.
4. Nailed (H) to the wall and secure (I) with two
mounting screws (J).
5. Connect the lamp shade (C) to the lamp holder
and secure with the socket ring(D) .(Socket Ring
located on socket)
6. Install bulb (E) not include.
/