Cable Guard CG-24 Installation guide

DESCRIPTION

The CG-24 Cable Guard is designed to accommodate heat cable from 8-13mm wide by 5-6.5mm thick (stand-

ard dimensions of most self-regulating heat cables in North America). Use the CG-24 to protect heat cable

systems from common damage from abrasion, slicing, animals and abuse where the cable comes into contact

with other sharp edges or human trafc. Common applications involve using the CG-24 to transition heat cable

from gutters into downspouts, where cable exits downspouts and against valley ashing edges.

MODEL: CG-24

Clean: Clean loose dirt and debris off cable.

Cut: If needed, use a tin snips to cut the CG-24 to the appropriate length for your

application.

Pinch: Using your ngers, begin installing Cable Guard by pinching it onto the heat

cable as shown (left). Start at one end and work your way to the other.

Instructions

Downspout Extentions

Downspouts

Sharp Edges

Some Common Applications

For more information visit www.radiantsolutionscompany.com

INSTALLATION MANUAL

Gutter Guards

™