DESCRIPTION
The CG-24 Cable Guard is designed to accommodate heat cable from 8-13mm wide by 5-6.5mm thick (stand-
ard dimensions of most self-regulating heat cables in North America). Use the CG-24 to protect heat cable
systems from common damage from abrasion, slicing, animals and abuse where the cable comes into contact
with other sharp edges or human trafc. Common applications involve using the CG-24 to transition heat cable
from gutters into downspouts, where cable exits downspouts and against valley ashing edges.
MODEL: CG-24
Clean: Clean loose dirt and debris off cable.
Cut: If needed, use a tin snips to cut the CG-24 to the appropriate length for your
application.
Pinch: Using your ngers, begin installing Cable Guard by pinching it onto the heat
cable as shown (left). Start at one end and work your way to the other.
Instructions
Downspout Extentions
Downspouts
Sharp Edges
Some Common Applications
For more information visit www.radiantsolutionscompany.com
INSTALLATION MANUAL
Gutter Guards
™
