SKYDANCE PK4 User manual
- Category
- Stroboscopes & disco lights
- Type
- User manual
SKYDANCE PK4 is a versatile device that combines scene control and zone dimming functionality. With its 4-key panel and dual-color LED indicators, it allows for easy control of lighting scenes and dimming of individual zones. It operates on RF 2.4GHz and DMX512 protocols, providing compatibility with a wide range of LED controllers and DMX decoders. The PK4 can be used as a standalone scene controller or integrated into a larger DMX system.
SKYDANCE PK4 is a versatile device that combines scene control and zone dimming functionality. With its 4-key panel and dual-color LED indicators, it allows for easy control of lighting scenes and dimming of individual zones. It operates on RF 2.4GHz and DMX512 protocols, providing compatibility with a wide range of LED controllers and DMX decoders. The PK4 can be used as a standalone scene controller or integrated into a larger DMX system.
ON
1 2
LN
IN PU T 10 0- 24 0VAC
GN D D+D-
DM X OU TP UT
ON
1 2
● 8/4 key panel RF 2.4G remote with scene recall or zone dimming function, selectable by DIP switch.
● Each zone can remote control one or multiple RF 2.4G 1-5 colors LED controllers.
● Can also be used as 8/4/2 zone dimming DMX512 master.
● DMX signal output comply to standard DMX512 protocol, compatible with DMX decoder from any supplier.
● Each push button with blue and red dual color LED indicator.
● White & Black & Golden color panel available.
Operation temperature
Case temperature (Max.)
Environment
IP rating
Dimming data
Dimming range
Push button + RF 2.4GHz
10m(Barrier-free space)
256 levels
0 -100%
Technical Parameters
Input signal
RF Control distance
Dimming level
IP20
Ta: -30
O
C ~ +55
O
C
T c: +65
O
C
Model No.: PK8,PK4
Push button/2-8 Scene/2-8 Zone dimming/Dual color LED key/AC input/RF 2.4G and DMX 512 signal output
Features
Mechanical Structures and Installations
Wall Mounted Scene or Switch Panel
LVD RED
PK4
PK8
Key function
Output signal RF 2.4GHz, DMX512
Input voltage 100-240VAC
Input current Max 0.1A
Input and Output
Warranty
5 years
Warranty
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certification CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
PK8 Scene & Switch Panel
12
8 Scene
ON,OFF,6 Scene
8 Zone ON/OFF
4 Zone ON,OFF
1: Scene 1 2: Scene 2 3: Scene 3 4: Scene 4
5: Scene 5 6: Scene 6 7: Scene 7 8: Scene 8
1: ON 2: OFF 3: Scene 1 4: Scene 2
5: Scene 3 6: Scene 4 7: Scene 5 8: Scene 6
1: Zone 1 on/off 2: Zone 2 on/off 3: Zone 3 on/off 4: Zone 4 on/off
5: Zone 5 on/off 6: Zone 6 on/off 7: Zone 7 on/off 8: Zone 8 on/off
1: Zone 1 on 2: Zone 1 off 3: Zone 2 on 4: Zone 2 off
5: Zone 3 on 6: Zone 3 off 7: Zone 4 on 8: Zone 3 off
1,3,5,7 Short press: Turn on the light of each zone.
1,3,5,7 Long press(1-6s): Dimming up when light is on.
2,4,6,8 Short press: Turn off the light of each zone.
2,4,6,8 Long press(1-6s): Dimming down when light is on.
1-8 Short press: Turn on or off the light of each zone.
1-8 Long press(1-6s): Dimming up or down when light is on.
1-8 Short press: Recall scene 1-8.
1-8 Long press(2s): Turn off this scene when it is on.
1 Short press: Turn on the scene light.
1 Long press(1-6s): Dimming up when light is on.
2 Short press: Turn off the scene light.
2 Long press(1-6s): Dimming down when light is on.
3-8 Short press: Recall scene 1-6.
PK4 Scene & Switch Panel
4 Scene
ON,OFF,2 Scene
4 Zone ON/OFF
2 Zone ON,OFF
1: Scene 1 2: Scene 2
3: Scene 3 4: Scene 4
1: ON 2: OFF
3: Scene 1 4: Scene2
1: Zone 1 on/off 2: Zone 2 on/off
3: Zone 3 on/off 4: Zone 4 on/off
1: Zone 1 on 2: Zone 2 off
3: Zone 1 on 4: Zone 2 off
1,3 Short press: Turn on the light of each zone.
1,3 Long press(1-6s): Dimming up when light is on.
2,4 Short press: Turn off the light of each zone.
2,4 Long press(1-6s): Dimming down when light is on.
1-4 Short press: Turn on or off the light of each zone.
1-4 Long press(1-6s): Dimming up or down when light is on.
1-4 Short press: Recall scene 1-4.
1-4 Long press(2s): Turn off this scene when it is on.
1 Short press: Turn on the light.
1 Long press(1-6s): Dimming up when light is on.
2 Short press: Turn off the light.
2 Long press(1-6s): Dimming down when light is on.
3,4 Short press: Recall scene 1-2.
3
5
7
4
6
8
1
3
2
4
AC input L
AC input N
DMX signal GND DMX output -
DMX output +
DIP switch for
function selection
PK8, PK4 Wall Mounted Scene or Switch Panel
ON
1 2
ON
1 2
ON
1 2
ON
1 2
ON
1 2
ON
1 2
ON
1 2
ON
1 2
86. 0 0 m m
86. 0 0 m m
52. 0 0 m m
52. 0 0 m m
59. 0 0 m m 25. 5 0 m m
35.50 mm
Typical base as below:
European style 86 size
Installation diagram:
Base
Uninstall button Turn the screw Install the button
User Manual Ver 1.0.2 Page 1
PK8, PK4 is designed for scene control, with 8/6/4/2 scene memories selectable, and each scene is programmed by 8 zone
and 8 scene RF remote RS10.
ON
1 2
M+
1 2 3 4
5 6 7 8
CCT RG B
S+
Zone Scene
1 Scene
3 Scene
5 Scene
7 Scene
1-8 Scene
Scene programming
RS10 remote
PK8 with 8 scene
When the panel set as 8/6/4/2 scene function, each scene must be programmed by RS10 remote firstly,
then use panel scene button to recall these scene.
Step1: one or multiple light zone are matched with the RS10 remote.
Step2: use RS10 remote to change the color, brightness or on/off state of the light zone,
and save the current state to 1-8 scene.
Step3: one or multiple light zone are matched with the PK8 panel remote.
Step4: use panel scene button to recall these scene which programmed by RS10 remote.
The scene number of the scene panel corresponds to the scene number of the RS10 remote.
2 Scene
4 Scene
6 Scene
8 Scene
LN
INPU T 100-2 40VAC
GND D+D-
DMX OU TPUT
ON
1 2
LN
INP UT 100- 24 0VAC
GND D +D-
DMX O UTPUT
ON
1 2
Use the controller’s Match key
Match:
Short press match key, immediately press Scene or ON/OFF key of the panel.
The LED indicator fast flash a few times means match is successful.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on power, repeat again.
Immediately short press Scene or ON/OFF key 3 times on the panel.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power of the receiver, then switch on power, repeat again.
Immediately short press Scene or ON/OFF key 5 times on the panel.
The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times means all matched remotes were deleted.
When the panel work as RF remote, it need match with other RF 2.4G 1-5 colors LED controllers.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Wiring diagram for panel work as RF remote
Panel work as RF remote
Page 2
Wiring diagram for panel work as DMX512 master
Panel work as DMX512 Master
D4-L
DMX512 & RDM Decoder
D+D- D-D+
AC100-240V
Power Supply
12-24VDC
Constant Voltage
DMX signal
CW CW
AC100-240V
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
AC100-240V
When the panel set as 8/4/2 zone dimming function, it can also be work as DMX512 master.
After connect with DMX decoders, please set the DMX decoders address as below:
DMX decoder’s address 001 is controlled by Zone 1,
DMX decoder’s address 002 is controlled by Zone 2,
DMX decoder’s address 003 is controlled by Zone 3,
DMX decoder’s address 004 is controlled by Zone 4,
DMX decoder’s address 005 is controlled by Zone 5,
DMX decoder’s address 006 is controlled by Zone 6,
DMX decoder’s address 007 is controlled by Zone 7,
DMX decoder’s address 008 is controlled by Zone 8.
PK8, PK4 Wall Mounted Scene or Switch Panel
User Manual Ver 1.0.2
ON
1 2
ON
1 2
V2
V2-L
PT-12A-2
Dual Color LED Controller
( 12-24V, 5A/CH )
Dual Color LED Controller
( 12-48V, 8A/CH )
RF Constant Current LED CCT Driver
( 12W, 150-500mA )
Light type Output type
DIM
CCT
Constant voltage
Constant current
Constant voltage
V1
V1-L
V1-H/P
PT-10A-L
PT-12A-L
PB-12A-L
CXR-21A
Single Color LED Controller
( 5-36V, 8A )
Single Color LED Controller
( 12-48V, 15A )
Single Color LED Controller
( 12-24V, 8A )
RF Constant Current LED Driver
( 10W, 100-450mA )
RF Constant Current LED Driver
( 12W, 100-450mA )
RF Constant Current LED Driver
( 12W, 100-450mA )
RF Constant Current LED Driver
( 1.5-21W, 150-500mA )
Model Product name Product pictrue
RGB/RGBW
Constant current
PT-20A-2
CXR-21A-2(WB)
CXR-21A-2(WT)
Constant voltage
V3
V3-L
VP
RF Constant Current LED CCT Driver
( 20W, 300-1050mA )
Bluetooth & RF 2CH Constant Current LED Driver
( 21W,150-500mA )
WiFi & RF 2CH Constant Current LED Driver
( 21W,150-500mA )
3 Channel LED RF Controller
( 12-24V, 4A/CH )
3 Channel LED RF Controller
( 12-48V, 6A/CH )
4 Channel LED RF Controller
( 12-24V, 4A/CH )
Constant current
V4 4 Channel LED RF Controller
( 12-48V, 5A/CH )
C4
Constant voltage
V5-M
V5-L
4 Channel LED RF Controller
( 12-48V, 350-1200mA )
5 Channel LED RF Controller
( 12-24V, 3A/CH )
5 Channel LED RF Controller
( 12-48V, 5A/CH )
RGB+CCT
Recommended RF LED controller and driver
-
1
-
2
SKYDANCE PK4 User manual
- Category
- Stroboscopes & disco lights
- Type
- User manual
SKYDANCE PK4 is a versatile device that combines scene control and zone dimming functionality. With its 4-key panel and dual-color LED indicators, it allows for easy control of lighting scenes and dimming of individual zones. It operates on RF 2.4GHz and DMX512 protocols, providing compatibility with a wide range of LED controllers and DMX decoders. The PK4 can be used as a standalone scene controller or integrated into a larger DMX system.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
optonica 6387 User manual
-
Philio R8s User manual
-
optonica 6383 User manual
-
Robus LT-854-5A Owner's manual
-
Sunricher SR-2108AS(WP)-EU User manual
-
iskydance R9 User manual
-
ledyilighting T15 User manual
-
iskydance V1-M, V1-M(D) Single Color LED Mini RF Controller User manual
-
-
