2. Ancona
  3. MH-MD-13003WT
MH-MD-13003WT

Ancona MH-MD-13003WT User guide

  • Hello! I've reviewed the user manual for the Medallion MH-MD-13003WT. This document provides step-by-step instructions on how to mount the medallion with included hardware, as well as care guidelines. Feel free to ask any questions you might have about the installation process or other details in the manual.
  • What should I use as a working surface during installation?
    What should I do if I have missing or damaged parts?
    How should I clean the medallion?
estimated
installation time
10 : 00
people required
1 or more
MH-MD-13003WT
1
Ok, let’s
get started!
Put on mood music!
To prevent damage to product, use the clean side of
package carton or rug as working surface.
In the event of missing or damaged parts, delivery
problems etc., please reach out to our team.
We will be happy to x the problem!
2
care guide
Clean regularly with a soft and dry cloth.
To protect nish, avoid use of abrasive cleaners.
Wipe up spills immediately. Please!
3
A
Medallion
x1
product
parts
4
(B)- Screw
x2
(C) - Wall Plug
x2
what’s
included
5
6
installation
instructions
Friendly Tip: Take a deep
breath going in.
This is easy even if you are not
used to tools. Just follow these
steps to the T, and the
outcome will be
worth it!
Measure the distance between the two sawtooths using a measuring
tool.
step 1:
7
A
Place the measuring tool against the wall and make two marks
where you want to mount the medallion.
step 2:
Drill holes at the points you just marked.
step 3:
C
Using a hammer, insert the wall plugs (C) inside the holes.
step 4:
8
Fix the screws (B) into the wall plugs (C). Use a screwdriver to make
sure they are secure.
step 5:
B
Place the sawtooths over the screws.
step 6:
Voila! Your medallion is now installed and secure!
/