Climax WTRQ2 User manual

WTRQ2
Climax
Brand
Climax
Model
WTRQ2
Type
User manual

Climax WTRQ2 is an emergency pendant/wrist transmitter designed for seniors' safety and ease of use. With its long battery life and waterproof design, it ensures reliable protection wherever you go. Simply press the active button for more than a second to activate the control panel, triggering an emergency call or alarm. For added convenience, the WTRQ2 features auto low battery detection, alerting you when the battery needs replacement. Experience peace of mind knowing that help is just a button press away with the Climax WTRQ2.

Climax WTRQ2 is an emergency pendant/wrist transmitter designed for seniors' safety and ease of use. With its long battery life and waterproof design, it ensures reliable protection wherever you go. Simply press the active button for more than a second to activate the control panel, triggering an emergency call or alarm. For added convenience, the WTRQ2 features auto low battery detection, alerting you when the battery needs replacement. Experience peace of mind knowing that help is just a button press away with the Climax WTRQ2.

1
E
Em
me
er
rg
ge
en
nc
cy
y
P
Pe
en
nd
da
an
nt
t
/
/
W
Wr
ri
is
st
t
T
Tr
ra
an
ns
sm
mi
it
tt
te
er
r
(
(W
WT
TR
RQ
Q
S
Se
er
ri
ie
es
s)
)
E
Ea
as
sy
y
&
&
E
Ex
xc
ch
ha
an
ng
ge
ea
ab
bl
le
e
B
Be
el
lt
t
/
/
N
Ne
ec
ck
k
C
Co
or
rd
d
s
st
ty
yl
le
es
s
L
Lo
on
ng
g
b
ba
at
tt
te
er
ry
y
l
li
if
fe
e
W
Wa
at
te
er
rp
pr
ro
oo
of
f
The Wrist Transmitter/Emergency Pendant is designed to be worn by seniors as they
move on the premises. In an emergency, help is merely a button press away.
The WTRQ Series include the following models:
Model Name
WTRQ
WTRQ2
WTRQ3
A
Ac
ct
ti
iv
ve
e
B
Bu
ut
tt
to
on
n
Pressing the Active Button for more than 1 sec will activate the Control Panel, causing it to dial
emergency call or alarm.
Press and hold the Active Button for 8 seconds to send a Cancel Code to the Control Panel.
(This function is not compatible with every control panel).
Press and hold the button for 15 sec (until the LED flashes 3 times) to activate the Auto Low
Battery Detection. WTRQ will automatically check battery voltage every 20-24 hours.
L
LE
ED
D
i
in
nd
di
ic
ca
at
to
or
r
Flashes three times: When Auto Low Battery detection
function is enabled. (WTRQ2 & WTRQ3)
L
Le
ea
ar
rn
n
i
in
n
t
th
he
e
T
Tr
ra
an
ns
sm
mi
it
tt
te
er
r
Step 1. Put the Control Panel into the learning mode.
Step 2. Press the Button on the Transmitter, a radio signal will be transmitted to the Control
Panel.
Step 3. Please refer to the operation manual of your Control Panel to complete the learning
process.
B
Ba
at
tt
te
er
ry
y
L
Li
if
fe
e
The Transmitter uses one CR2032 3V Lithium battery as its power source.
Every time the Active Button is pressed, the Wrist Transmitter will check the battery
voltage. If low battery is detected for 3 times successively, the Wrist Transmitter will enter
low battery status and transmit Low Battery signal along with regular signal every time the
button is pressed.
<
<N
NO
OT
TE
E>
>
A 30-second interval is required between each Active Button press to check the
battery voltage again.
S
Sw
wi
it
tc
ch
hi
in
ng
g
B
Be
et
tw
we
ee
en
n
W
Wr
ri
is
st
t
B
Ba
an
nd
d/
/N
Ne
ec
ck
k
C
Co
or
rd
d
2
Step 1. Take off the Wrist Band on the Transmitter.
Step 2. Clip the hook onto the Transmitter.
Step 3. Thread Neck cord through the hook.
A
Au
ut
to
o
L
Lo
ow
w
B
Ba
at
tt
te
er
ry
y
D
De
et
te
ec
ct
ti
io
on
n
The Wrist Transmitter features Auto Low Battery detection function.
Press and hold the Active Button for 15 seconds to activate this function (ignoring the
1st and 2nd set of LED flashes at the first and 8th seconds). The LED will flash three
times to confirm.
After activation, the Wrist Transmitter will automatically check battery voltage every
20-24 hours. If low battery is detected for 3 times successively, the Wrist Transmitter
will enter low battery status and transmit low battery signal every 12 hours.
<
<N
NO
OT
TE
E>
>
If Auto Low Battery detection is not activated, the Wrist Transmitter will not
automatically check battery status. You need to check battery status by manually
pressing the Active Button.
Once Auto Low Battery Detection is activated, it cannot be deactivated later in any
circumstances.
C
Co
om
mp
pl
li
ia
an
nc
ce
e
w
wi
it
th
h
S
St
ta
an
nd
da
ar
rd
ds
s
Complies with the requirements of the Radio Equipment Directive 2014/53/EU
Electromagnetic Compatibility Directive 2014/30/EU, Low Voltage Directive 2014/35/EU
Safety:
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EMC:
EN 50130-4:2011+A1:2014
EN 301489-1:V2.2.0:2017
EN 301489-3:V2.1.1:2017
Radio: EN 300220-1:V3.1.1:2017
EN 300220-2:V1.1.1:2017
EN 300220-3-1:V1.1.1:2017
EN 300220-3-2:V1.1.1:2017
3
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's authority
to operate this equipment. (Example - use only shielded interface cables when connecting
to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 0.5 centimeters between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of
at least 0.5 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Climax WTRQ2 User manual

WTRQ2
Climax
Brand
Climax
Model
WTRQ2
Type
User manual

Climax WTRQ2 is an emergency pendant/wrist transmitter designed for seniors' safety and ease of use. With its long battery life and waterproof design, it ensures reliable protection wherever you go. Simply press the active button for more than a second to activate the control panel, triggering an emergency call or alarm. For added convenience, the WTRQ2 features auto low battery detection, alerting you when the battery needs replacement. Experience peace of mind knowing that help is just a button press away with the Climax WTRQ2.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents