Page is loading ...
User Guide
40W High Output Wireless Charging Station
Introduction
Charge your iPhone, AirPods or any USB chargeable devices simultaneously 3-in-1 Magnetic Wireless
Charging Stand. Leveraging MagSafe technology, place your iPhone 12 on the charging stand for a secure
connection in portrait or landscape mode. The second wireless charger is optimized for use with the
AirPods and charge it at the fastest possible speed. The additional USB port charges at 20W Power
Delivery engineered to charge your PD compatible devices from 0-60% in just 30mins. Professional,
aesthetically inspired design with stainless-steel finish complements any space, from a living room to the
office.
Packaging Contents
AuraBase-PD20
Power Cable
User Guide
Specifications
• Input: DC 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A
• Chipset: GPM8F3331B
• Coil: 2
• Output
• Magnetic Wireless Charging: 5W/7.5W/10W/15W
• AirPods Wireless Charger: 5W
• USB-C: 5V/3A, 9V/2.22A,12V/1.67A (20W PD)
• Charging distance: 2-8mm
• Frequency: 110-205kHz
• Efficiency: 80%
Features
3-in-1 Design:Charge your iPhone 12, AirPods and any other USB device at the same time,
freeing up space on your desk.
15W Magnetic Charging:The MagSafe technology delivers seamless magnetic alignment and
15W fast wireless charging.
5W AirPods Charger: Charge your Apple AirPods or wirelessly chargeable devices via the
wireless charger.
20W Power Delivery: 4X Faster than traditional chargers, engineered to charge your PD
compatible devices from 0-60% in just 30mins.
360° Viewing: The no arm support provides you with non-obstructive access to a plethora of
viewing angles.
Sleek Aluminium design: Aluminum crafted elegant design fits perfectly well with your iPhone
and desk.
Anti-Slip Surface: The strong magnet keeps your phone in place and prevents it from slipping
off the charging pad.
Safe Charging Protection: Thermal protection sensor and foreign object detection provide fast
and safe wireless charging.
Case Friendly: Works with cases up to 5mm thickness, so you do not need to remove the
case to charge your device.
Compatibility
AuraBase-20PD is compatible with all devices supporting Qi Wireless Charging.
Precautions
Please read all safety instructions and warnings thoroughly before using this product. Improper use of
this product may result in damage to this or attached products.
1. Wipe the product using a soft cloth and don’t use solvents like benzene or alcohol.
2. Do not leave the dock on standby mode. Turn off the power and pull out the plug when not in use.
3. Do not store or use the product in a high-temperature environment, including intense sunlight or
heat.
4. Do not operate the device inside a closed box; please make sure that enough ventilation is provided.
5. If there is any reason to believe that there is damage to the product, discontinue use immediately.
Appearance & Interface Description
1. Magnetic Wireless charging module
2. Qi Wireless charging area
3. USB-C Power Delivery Output
4. USB-C Charging Input
Operation Instructions
1. Connect one end of the power cable to a wall charger and the other end to the charging dock.
2. Apple MagSafe Devices: Place the device on the Magnetic Wireless charging module to begin
charging.
3. Qi Wireless Charging: Place any wireless charging compatible device on the module to begin
charging.
4. USB-C Power Delivery: Connect one end of the power cable to the USB-C Power Delivery
Output and the other to the device’s charging port.
5. A Quick Charging 3.0 adapter is recommended to be used for the best charging performance
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the
party.Responsible for compliance could void the user’s authority to operate this equipment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and
your body.
/
