2. Angelo Decor
  3. AD97018

Angelo Decor AD97018 Operating instructions

  • Hello! I have analyzed the provided document about the Angelo Décor fountain model AD97018, specifically its Installation and Assembly Instructions. The document details how to install the fountain, including steps about power cord, bowl, pump and tubing assembly. It also includes important information about maintenance and winter storage. I am ready to answer any questions you have about this document and the fountain.
  • How should the power cord be installed?
    How is the bowl attached to the base?
    What should be done with the fountain during winter?
    How full should the bowl be kept with water?
Calla Lily Fountain
Installation and Assembly Instructions
Read these instructions carefully before beginning installation and assembly.
Carefully unpack the carton, and arrange all of the parts in the working area.
Insert the power cord through the
standpipe. Feed the power cord through the bowl. Pull the power cord through the groove
at the bottom of the fountain.
Attach the bowl to the base using the
twist and lock assembly system. Note
the position of the grooves.
Use pliers to extend the pump outlet. Measure the amount of tubing needed.
Cut the tubing to the proper length. Insert the pump outlet into the tubing. Line up the grooves, and then twist
and lock in order to secure it in place.
For best results and longer life, keep the fountain clean. Use a soft cloth and mild soap, and inspect the pump for debris
on a regular basis.
It is recommended that the bowl be kept 3/4 full of water in order to avoid burning out the pump.
This fountain should be stored during the winter, because water that is left to freeze in the bowl may cause cracking.
Disassemble the fountain, remove the pump and all water, and store it in a garage or shed.
/