Arrange all parts. Carefully lower the top section into place while feeding the tubing
down the opening. Set the top into place.
If you have any issues with this item, please DO NOT return the unit to place of purchase.
Please visit our web site, www.angelodecor.com, for assistance and warranty information.
First unpack carton carefully, arranging parts safely in your working area.
Thank you for buying an Angelo Décor Fountain! We hope you
will find these instructions helpful in setting up your fountain.
Feed the cord from the light through the
opening.
Product must be properly stored for winter.
Arrange all parts. Carefully lower the top section into place while feeding the tubing
down the opening. Set the top into place.
The final assembly
should look like this
Set the light into the opening and adjust the
angle as desired.
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend keeping bowl 3/4 full
of water to avoid pump burnout.
If you have any issues with this item, please DO NOT return the unit to place of purchase.
Please visit our web site, www.angelodecor.com, for assistance and warranty information.
First unpack carton carefully, arranging parts safely in your working area.
Thank you for buying an Angelo Décor Fountain! We hope you
will find these instructions helpful in setting up your fountain.
Add the decorative rocks as desired.
Feed the cord from the light through the
opening.
Feed the light cord out the opening at the
back and attach to the transformer. Connect the tubing to the pump and
place the pump inside the reservoir.
Ensure the pre-installed foam is
positioned so that it covers the
entire output area as shown. This
may need to be adjusted to improve
the water flow.
/
