Angelo Decor AD97722 Operating instructions

Arrange all parts. Carefully lower the top section into place while feeding the tubing

down the opening. Set the top into place.

If you have any issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Thank you for buying an Angelo Décor Fountain! We hope you

will find these instructions helpful in setting up your fountain.

Feed the cord from the light through the

opening.

Product must be properly stored for winter.

Arrange all parts. Carefully lower the top section into place while feeding the tubing

down the opening. Set the top into place.

The final assembly

should look like this

Set the light into the opening and adjust the

angle as desired.

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend keeping bowl 3/4 full

of water to avoid pump burnout.

If you have any issues with this item, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Thank you for buying an Angelo Décor Fountain! We hope you

will find these instructions helpful in setting up your fountain.

Add the decorative rocks as desired.

Feed the cord from the light through the

opening.

Feed the light cord out the opening at the

back and attach to the transformer. Connect the tubing to the pump and

place the pump inside the reservoir.

Ensure the pre-installed foam is

positioned so that it covers the

entire output area as shown. This

may need to be adjusted to improve

the water flow.