nke WATTECO Monit’O LoRaWAN Remote Monitoring User guide

Monit’O LoRaWAN Remote Monitoring
Brand
nke WATTECO
Model
Monit’O LoRaWAN Remote Monitoring
Type
User guide

nke WATTECO Monit’O LoRaWAN Remote Monitoring device allows you to monitor a variety of physical parameters, including voltage, current, power, and energy consumption, and transmit the data wirelessly via LoRaWAN® technology. It features versatile input options, including 0-70V AC/DC, 0-100mV AC/DC, 4-20mA, 0-10V DC, and S0 pulse input. The device can operate on either battery power or an external power supply and has a wide range of connectivity options, including digital inputs and Modbus communication.

nke WATTECO Monit’O LoRaWAN Remote Monitoring device allows you to monitor a variety of physical parameters, including voltage, current, power, and energy consumption, and transmit the data wirelessly via LoRaWAN® technology. It features versatile input options, including 0-70V AC/DC, 0-100mV AC/DC, 4-20mA, 0-10V DC, and S0 pulse input. The device can operate on either battery power or an external power supply and has a wide range of connectivity options, including digital inputs and Modbus communication.

Press’O +
50-70-189
33-70-037-000
Monit’O
50-70-141
Press’O
50-70-017
Démarrer
Start
3 - 5 sec
Mélodie : Association
Sound : Beep
Melody + Beep :
Network searching
Son : Bip Mélodie + Bip :
Recherche réseau
>1sec
Attendre / Wait Attendre / Wait
Melody : Association
ON
OFF
>5 sec
Sound : Beep
Son : Bip
Switching off
Extinction
Attendre / Wait
Provisionner l’appareil sur
votre réseau LoRaWAN
®
avec les clefs mises
à dispositions sur la
plateforme sécurisée.
Provision the device on
your LoRaWAN
®
network
with the keys available on
the secure platform.
Vue de côté
Side view
Vue face
Front view
Vidéo / Video :
ON - OFF
https://www.watteco.fr/
assistance/tutoriels-video/
Connectiques
Connectors
Monit’O
0-100 mV 0-70 V
Mesure de 0 - 100 mVolts :
Entrée isolée galvaniquement
Précision +-1mV
Fil de 1,5 m
AWG 20-26
Toute tension supérieure à 1V est
destructive
Measurement of 0 - 100 mVolts :
Galvanically isolated input
Accuracy +-1mV
1.5 m wire AWG 20-26
Any voltage above 1V is destructive
Mesure de 0 - 70 Volts :
Tension jusqu’à 70V
Précision +-70mV
Fil de 1,5 m AWG 20-26
Measurement from 0 - 70 Volts :
Voltage up to 70V
Accuracy +-70mV
1.5 m wire
AWG 20-26
Connectiques
Connectors
Press’O
Caractéristiques entrées digitale :
Digital input features :
Type A
A Size
3.6 V
3600 mAh
P4 +
P4 -
Digital Input
Gnd
Gnd
Ext Power -
Ext Power + 9- 24 Vdc
14 Vdc
Output power
10 Vdc
P1.A4 4-20 mA
input
P1.A3 0-10 Vdc
input
P1.A2 Gnd
P1.A1 Output power
supply
Impédance / Impedance: 1MΩ
Tension : 0-30Vdc
Courant délivré / Delivered current: 3.5 µA
Fréquence signal max / Signal frequency max: 0-100 Hz
Installation
Setting-up
Ouverture / Fermeture
Opening / Closure
Montage mural
Wall mounting
RailDIN
Attention, après mise en place du kit RailDIN, l’indice de protection du boîtier passe en IP50.
Please note that after installation of the
RailDIN
kit, the protection rating of the housing will change
to IP50.
Foret ø 3,5 mm
Drill ø 0.13 in
Propagation radioélectrique
Radio propagation
Référence /
Reference
50-70-017 50-70-189 50-70-141
Classe /
Class
A A A
Niveau de puissance /
Power Level
+14 dBm +14 dBm +14 dBm
Mesures /
Measures
4-20 mA / 0-10 V 4-20 mA / 0-10 V
Input S0 0-70V / 0-100mV
Antenne /
Antenna
Interne
Internal
Externe
External
Externe
External
Matériaux du boîtier /
Casing materials
ASA / PC ASA / PC ASA / PC
Indice de protection /
IP rating
IP55 IP55 IP55
Caractéristiques /
Characteritics
Vérier la couverture radio avec
par exemple le Netw’O.
Check the radio coverage with
the Netw’O.
Caractéristiques /
Characteritics
SITE SUPPORT CERTIFICATIONS
https://support.watteco.com/
Watteco représenté par JC LE BLEIS, déclare que l'équipement radioélectrique du type 50-70-141/50-70-017/
50-70-189 est conforme à la directive 2014/53/UE (RED). Le texte complet de la déclaration UE de conformité est
disponible à l'adresse internet suivante: https://www.watteco.fr/assistance/centre-de-telechargement/
Watteco represented by JC LE BLEIS, declares that the radio equipment type 50-70-141/50-70-017/ 50-70-189 is
in conformity with Directive 2014/53/EU (RED). The full text of the EU Declaration of Conformity is available at the
following web address: https://www.watteco.com/assistance/download-center/
Merci d’avoir choisi
les produits WATTECO
IoT device manufacturer
Thanks for choosing
WATTECO devices
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

nke WATTECO Monit’O LoRaWAN Remote Monitoring User guide

Monit’O LoRaWAN Remote Monitoring
Brand
nke WATTECO
Model
Monit’O LoRaWAN Remote Monitoring
Type
User guide

nke WATTECO Monit’O LoRaWAN Remote Monitoring device allows you to monitor a variety of physical parameters, including voltage, current, power, and energy consumption, and transmit the data wirelessly via LoRaWAN® technology. It features versatile input options, including 0-70V AC/DC, 0-100mV AC/DC, 4-20mA, 0-10V DC, and S0 pulse input. The device can operate on either battery power or an external power supply and has a wide range of connectivity options, including digital inputs and Modbus communication.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents