John Deere VVV-S0249 User manual

Brand: John Deere

Model: VVV-S0249

Type: User manual

Step 1. Step 2.

Step 3.

VVV-S0249 1/10 JDM Hydraulic

Functional Bottle Jack

Instructions for use:

1. From the jack’s highest lift point (starting

position out of the box), pull out the handle

and use the head to rotate the pressure

relief valve counterclockwise for 1 ½ turns

2. Slowly press the ram to the bottom and

rotate the relief valve clockwise for 1 ½

turns

3. Insert the handle into the handle socket,

and rotate the handle

When using the jack for the first time:

1. Press down the ram and pump the

handle slowly

a. If the speed is too fast, the hydraulic

oil and air in the cylinder will create bubbles

2. Once the hydraulic oil pressure is raised,

a small amount of hydraulic oil will be

discharged from the exhaust hole

a. This is a normal occurrence that will

cease after multiple cycles of work

Extension Screw (stainless steel)

When the height is not enough, the

spiral rises to adjust the height.

Second Stage Ram (stainless steel)

First Stage Ram (stainless steel)

Filler Plug

Pump Body (stainless steel)

Handle Socket (aluminum alloy)

Handle (aluminum alloy)

Pressure Relief Valve (stainless steel)

Base (aluminum alloy)

Adjust height

Additional Information:

1. Vertical jacks can only be used vertically, not horizontally or upside down

2. If you notice the Ram not going to full extension, use a syringe to add more hydraulic oil to the

filler plug

3. When storing the jack, keep the jack at full extension and do not lie it on its side. This could

cause excessive leaking out of the filler plug

John Deere VVV-S0249 User manual

Brand: John Deere

Model: VVV-S0249

Type: User manual

Download PDF

report

John Deere VVV-S0249 User manual

John Deere VVV-S0249 User manual

Other documents