Hover-1 HOVER-1 VIVID Folding Kick Scooter, VIVID Folding Kick Scooter User guide

  • This document is a user guide for the HOVER-1 VIVID scooter. It provides instructions on how to use the scooter safely, including identifying potential pinch points and making adjustments to the height of the handlebars. I've reviewed the document and I'm ready to answer your questions about the VIVID scooter.
  • How do I fold the scooter?
    How do I unfold the scooter?
    How do I adjust the height of the handlebars?
Push
Button
Unscrew
To Unlock
Screw Tight
To Lock
Adjust
Height
Fold
Down
Unfold
Up
PARTS PINCH POINTS FOLDING / UNFOLDING HEIGHT ADJUSTMENT
QUICK START GUIDE
1. Handlebars
2. Column Lock
3. Adjustable Column
4. Height Adjustment Button
5. Rear Foot Brake
6. Non-slip Footpad
7. Lean-to-turn Axle Adjustment Knob
1 2
3 4
1
4
2
3
6
5
7
Some parts of your scooter can injure you if mishandled. Moving
parts, clamps, and height-adjustable parts can cut or pinch skin.
Please watch for pinch points where injury may be sustained. Do not
leave your hand or ingers in these areas while folding or unfolding
the scooter.
To fold your Vivid, locate the release latch at the bottom of the scooter.
Pull the release latch down and pull the handlebars down until the column
is horizontal. To unfold your scooter, pull the handlebars up until the
column is vertical. Make sure the release is secured before riding.
To adjust the height of the handlebars, unscrew the column
lock and push the height adjustment button in. While the
button is pushed in, raise or lower the handlebars to the
desired height. Make sure the height adjustment button clicks
into place, and screw the column lock tight to secure the
column.
QUICK START GUIDE
VIVID
ADULT SUPERVISION REQUIRED
Release
Snaps In Place
To Lock
VIVID
Pull
Release To
Fold
Size: 182x140mm 350gmatte finishdouble sided printing , CMYK
/