Sharkoon TK5M RGB Operating instructions

Category
Computer cases
Type
Operating instructions

Sharkoon TK5M RGB is an ATX case with a tempered glass side panel that allows for optimal presentation of installed hardware. It features good cooling performance with three pre-installed 120 mm RGB LED fans at the front and one at the rear. Additionally, two more 120 mm fans or two 140 mm fans can be installed under the top panel for enhanced cooling. The case supports Mini-ITX, Micro-ATX, and ATX motherboards and has ample space for components, including graphics cards up to 31 cm long, CPU coolers up to 15.7 cm high, and power supply units up to 17.5 cm long.

Sharkoon TK5M RGB is an ATX case with a tempered glass side panel that allows for optimal presentation of installed hardware. It features good cooling performance with three pre-installed 120 mm RGB LED fans at the front and one at the rear. Additionally, two more 120 mm fans or two 140 mm fans can be installed under the top panel for enhanced cooling. The case supports Mini-ITX, Micro-ATX, and ATX motherboards and has ample space for components, including graphics cards up to 31 cm long, CPU coolers up to 15.7 cm high, and power supply units up to 17.5 cm long.

Specifications
Product Name TK5M RGB
Form Factor ATX
Expansion Slots 7
Interior Painting
Tool-Free Devices Installation
Cable Management System
Side Panel Tempered Glass
Weight 5.35 kg
Dimensions (L x W x H) 41.1 x 20.0 x 45.6 cm
I/O
Type-C (USB 3.2 Gen 2) (Top): 1 | USB 3.0 (Top): 2 | Audio (Top):
Max. Drive Bays
2 x 3.5“ | 5 x 2.5“
Fan Configuration
Front Panel 3x 120 mm Addressable RGB LED
Fan (Pre-Installed)
Rear Panel 1x 120 mm Addressable RGB LED
Fan (Pre-Installed)
Top Panel 2x 120 mm or 2x 140 mm Fan (Optional)
RGB Compatibility
Type Addressable
Ports 4
Manual Control 14 Modes
Mainboard Compatibility MSI Mystic Light Sync,
ASUS Aura Sync,
Gigabyte RGB Fusion Ready,
ASRock Polychrome Sync
RGB Pinout 5V-D-coded-G
Compatibility
Mainboard Mini-ITX, Micro-ATX, ATX
Max. Length Graphics Cards 31.0 / 33.5 cm*
Max. Height CPU Cooler 15.7 cm
Max. Length Power Supply 17.5 cm
Package Contents
TK5M RGB, Accessory Set, Manual
EAN Code
TK5M RGB 4044951036479
01
* Without front fan
TK5M RGB
The ATX case TK5M RGB wins in all categories: The air-permeable mesh
front panel and the four pre-installed 120 mm RGB LED fans ensure a good
result for cooling hardware. The I/O panel is equipped with two USB 3.0
ports and even has a port for USB Type-C 3.2 Gen 2. The tempered glass
side panel allows a deep insight into the interior of the case, which can
be vividly illuminated using the 4-port RGB controller with 14 selectable
lighting modes.
Features
JUST COOL
The TK5M RGB comes already pre-installed with a good cooling perfor-
mance: Three 120 mm RGB LED fans are installed at the front of the case
and another at the rear of the case. If you want to further optimize the
cooling result, two more 120 mm fans or two 140 mm fans can be installed
under the top panel. At the front of the case, the dust filter is attached
magnetically while the frame is slotted on. Both these parts can therefore
be easily removed and reattached.
MADE FOR PRESENTING
The side panel of the TK5M RGB is made of tempered glass and enables
an optimal presentation of the installed hardware, while the power sup-
ply tunnel oers a space-saving location for the power supply unit. For a
continually tidy appearance, the cabling can be routed out of sight using
the cable pass-throughs.
SPACIOUS, DESPITE THE COMPACT SIZE
Despite its compact size, high-performance components can also be
installed in the TK5M RGB: graphics cards can be up to 31 cm long, CPU
coolers up to 15.7 cm high, and power supply units up to 17.5 cm long.
QUICK CONNECTIONS
On the I/O panel, the TK5M RGB has two USB 3.0 ports as well as a
Type-C port with the USB 3.2 Gen 2 specification. With a speed of up to 10
gigabits per second, the Type-C port oers fast data transfer whenever
needed.
DATA STORAGE TAKEN CARE OF
Apart from ample room for components, there is also sucient space for
data storage drives: A 2.5“ drive can be accommodated inside the HDD/
SSD cage, and another can be attached on top of it. Alternatively, two
3.5“ HDDs can be installed in and on the HDD/SSD cage. There is still
space for two 2.5“ drives in front of the mainboard tray and a 2.5“ drive
can also be mounted on top of the power supply tunnel.
02
  • Page 1 1
  • Page 2 2

Sharkoon TK5M RGB Operating instructions

Category
Computer cases
Type
Operating instructions

Sharkoon TK5M RGB is an ATX case with a tempered glass side panel that allows for optimal presentation of installed hardware. It features good cooling performance with three pre-installed 120 mm RGB LED fans at the front and one at the rear. Additionally, two more 120 mm fans or two 140 mm fans can be installed under the top panel for enhanced cooling. The case supports Mini-ITX, Micro-ATX, and ATX motherboards and has ample space for components, including graphics cards up to 31 cm long, CPU coolers up to 15.7 cm high, and power supply units up to 17.5 cm long.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI