2. Computers & electronics
  3. Projectors
  4. Projector mounts
  5. Neomounts
  6. BEAMER-C50 Projector Mount

Neomounts BEAMER-C50 Projector Mount Instructions Manual

  • Hello! I'm a chat assistant, and I've reviewed the provided instructions manual for the Neomounts BEAMER-C50 Projector Mount. This document provides details on how to install the mount, important safety precautions, and answers some frequently asked questions about projector mounts. I'm ready to answer your questions about this product.
  • How do I choose the right projector mount?
    Are there projector universal mounts?
    What connections do projectors use?
Home » Neomounts » Neomounts BEAMER-C50 Projector Mount Instructions Manual
Contents
1 Neomounts BEAMER-C50 Projector
Mount
2 Parts
3 Overview
4 How to Install
5 Caution
6 FAQ’s
7 Related Posts
Neomounts BEAMER-C50 Projector Mount
Neomounts BEAMER-C50 Projector Mount Instructions
Manual
Manuals+ — User Manuals Simplified.
Parts
Overview
How to Install
STEP 1
Install the ceiling plate
STEP 2
Attach the VESA plate
STEP 3
Install the extension brackets
STEP 4
Install the bracket to the projector
STEP 5
Adjust the mount to your desired position
Caution
1. To ensure safety, please read this manual carefully before installation and follow the instructions. Store this
manual in a safe place for future reference.
2. The manufacturer is not legally responsible for any equipment damage or personal injury caused by improper
installation or operation other than that in this manual.
3. The mount is designed for easy installation and removal. The manufacturer is not responsible for damage to
equipment or personal injuries resulting from human factors or acts of nature, such as earthquakes or
typhoons.
4. It is recommended that the assembly is installed only by qualified personnel.
5. At least two people are needed to install or remove the product to avoid the danger of falling objects.
6. Please carefully check the area where the mount is to be installed:
Avoid places subject to high temperatures. Moisture or contact with water.
Do not install the product near air conditioners or areas with excess dust and fumes.
Install only on vertical walls and avoid sloping surfaces.
Do not install in places subject to shock or vibration.
Do not install in places under direct exposure to bright light, as it may cause eye fatigue when viewing the
display panel.
7. Keep enough space around the display to ensure adequate ventilation.
8. To ensure a safe installation, first, check the structure of the wall. ceiling or floor and choose a safe mounting
location.
9. The wall, ceiling, or floor should be strong enough to support a weight of at least four times the display and
mounting combined. The mounting location must withstand an earthquake or other strong shock.
10. Do not modify accessories or use broken parts. Contact your dealer with questions.
11. Press all screws out Lilo do not apply excessive force to avoid breaking the screw or damaging its thread).
12. Drill holes and bolts are left in the wall, ceiling, or floor after the display and bracket are removed. Stains may
appear after prolonged use.
13. Because the manufacturer has no way to control the wall, ceiling, or floor type and the installation of the mount,
the warranty of the product will only cover the body of the mount The warranty period of the product is 5 years.
14. Please refer to the English language manual for any disputes over terms.
FAQ’s
How do I choose the right projector mount?
To select the proper mount, you must be aware of the size of the projected screen and the throw distance of the pro
jector.
Again, there is some wiggle room here, and the specifications of your device will outline the best viewing distance.
I thought all projector mounts were the same.
Not all mounts are made or built in the same way. To mount your projector to a wall or ceiling, there are really chea
p options available, but they might not have the precise adjustments required to get your image perfectly centered o
n your screen.
An angle can be used to mount a projector.
The projector should be mounted properly or set up on a solid, flat surface. Any angle can be used to place the
projector. The projector can be positioned either horizontally or vertically.
Are there projector universal mounts?
Universal mounts can accommodate a variety of projector models. By changing the screw-hole patterns, any
brand can be supported. They have projector arm extensions that may be adjusted as necessary. The mounts
that you can see with the down-extending arms that hold your mount are these.
How many different mounting types exist?
Dry mounting, wet mounting, and ready mounting are the three accepted methods for creating a mount.
What are the two different types of mounts?
Equatorial and alt-azimuth mounts are the two main types used for astronomy telescopes. The term altazimuth
refers to the two motions that the most basic type of mount has: azimuth (horizontal) and altitude (vertical).
What connections do projectors use?
There are several different types of projector connections, including USB, VGA, Component, HDMI, and Display
Port. Cross- or backward compatibility between several connection types is made possible via an adapter.
Is it possible to install the projector higher than the screen?
When the projector is set up, the centre of focus should be 8′′ above the top edge of the screen. It has an about 21
percent offset. So, it ought to be elevated above the screen. a screen height of 21 times.
Can you place a projector in a corner?
You can use your projector at an angle, but be ready to adjust the image. It probably begins distorted or off-center.
The picture can be focused without moving the projector; instead, you can utilize keystone correction or lens shift.
What height should the projector is set at?
In rooms with theatre seating or just one or two rows, like the majority of home theatres, the bottom of the screen
should normally be 24 to 36 inches high. In a room with several rows of seats and a level floor, the bottom of the
screen should be between 40 and 48 pixels high.
Does the ceiling need to be installed with a projector?
If you shelf-mount your projector, it will be simpler to reach and cost less to install. Yet, a projector mounted on the
roof of a home is kept out of the way of approaching vehicles and can be placed closer to the screen.
What screws do I need to mount my projector with?
These can be utilized starting with a #8 construction screw and above. The screws used to secure the projector to
the board should only penetrate boards that are no thicker than an inch. Each larger-than-#10 screw that are not
self-piloting needs to have its pilot cut slightly smaller than the shaft’s diameter.
What kind of projector mount works best with low ceilings?
The Universal Adjustable 2 x 2 feet Drop Ceiling Projector Mount blends in because it is white and the same size as
most drop ceiling tiles. The best feature about it is how easy it is to install and how no tile cutting is necessary.
Moreover, it can tilt 180 degrees and rotate 360 degrees.
What is the main purpose of the mounting?
The two objectives of mounting are to achieve perfect edge retention and to safeguard delicate or coated objects du
ring preparation. Mounting is used when layer protection is required. Also, it makes it safer and simpler to handle s
pecimens, such as those with small, sharp edges or irregular forms.
What does mounting accomplish?
With mounting, file systems, files, directories, devices, and special files are rendered usable at a certain location.
This is the sole technique to access a file system. The mount command instructs the operating system to join a
file system to a certain directory.
Download this PDF Link: Neomounts BEAMER-C50 Projector Mount Instructions Manual
Manuals+,
/