SPLASHBACK Pre Drilled Glass Installation guide

Pre Drilled Glass
Brand
SPLASHBACK
Model
Pre Drilled Glass
Type
Installation guide

SPLASHBACK Pre Drilled Glass: Enhance Your Kitchen or Vanity with a Stylish and Functional Glass Splashback

SPLASHBACK Pre Drilled Glass offers an elegant and practical solution to protect your walls from splashes and stains. Made from high-quality toughened glass, this splashback is durable and easy to clean, ensuring long-lasting beauty and functionality in your kitchen or vanity. With its pre-drilled holes and included screws and wall plugs, installation is a breeze. The clear silicone sealant provided ensures a secure and watertight seal, preventing moisture damage to your walls.

SPLASHBACK Pre Drilled Glass: Enhance Your Kitchen or Vanity with a Stylish and Functional Glass Splashback

SPLASHBACK Pre Drilled Glass offers an elegant and practical solution to protect your walls from splashes and stains. Made from high-quality toughened glass, this splashback is durable and easy to clean, ensuring long-lasting beauty and functionality in your kitchen or vanity. With its pre-drilled holes and included screws and wall plugs, installation is a breeze. The clear silicone sealant provided ensures a secure and watertight seal, preventing moisture damage to your walls.

How to install our pre-drilled glass splashbacks
What you need
Before you start
Easy to apply
Tape Measure
Check that your splashback fits the space.
This will depend on size of splashback
ordered and your preferred orientation.
Decide where you want to position your
splashback, then carefully and accurately
mark where the drill holes need to be.
Select the correct sized drill bit and determine
depth of hole required. Once drilling
complete, insert wall plugs firmly into holes.
Place the bottom edge of the splashback
to the rear of the sink or vanity unit lining
up the pre-drilled holes with those on the
wall. Insert the screws, fix to the wall
and cover screw heads with decorative
caps (supplied).
Use the Clear Silicone Sealant to seal
around all four sides of the splashback.
Take care to ensure that the sealant is
no more than 2.5mm in thickness.
Do not cut:
Our splashbacks
are made from
high quality
toughened glass
so cannot be cut.
Check the surface
is perfectly flat,
non-porous, dry
and dust free.
Clear Silicone Sealant
- Low Modulus Type
Sealant Gun Clean Cloth Splashback plus 4 x screws,
4 x wall plugs & 4 x
decorative caps (supplied)
1
1 2 3
3
Your splashback must be
at least 110mm away from
the nearest heat source.
2110mm
Splashback
to go here
Mark & drill holes Seal the edgesFix on the wall
WARNING!
SAFE HANDLING OF GLASS
IMPORTANT
We recommend that glass splashbacks are handled with care and that eye protection and suitable gloves should be
worn. We advise that the product is brought to room temperature over a period of 24 hours if it has been subject to
very hot or cold conditions beforehand.
Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners
of the product as impact will cause the glass to shatter.
Simply use hot water and a mild soap detergent to clean the glass splashback. Do not use abrasive cleaners.
Leave the splashback for at least 45 minutes to cool before wiping as in extreme cases applying a cold cloth
to a hot surface can cause the glass to crack/shatter.
         
We’d love to see your transformation. Why not take a photo of the space before and another
once your splashback is in place, post on Instagram, and tag us @splashbackuk
For further information and inspiration, visit our website
SPL ASHBACK.CO.UK
1
2
Health & Safety
Aftercare
All our glass splashbacks are guaranteed for 5yrs. For more information, visit www.splashback.co.uk/terms.htm
Guarantee
  • Page 1 1
  • Page 2 2

SPLASHBACK Pre Drilled Glass Installation guide

Pre Drilled Glass
Brand
SPLASHBACK
Model
Pre Drilled Glass
Type
Installation guide

SPLASHBACK Pre Drilled Glass: Enhance Your Kitchen or Vanity with a Stylish and Functional Glass Splashback

SPLASHBACK Pre Drilled Glass offers an elegant and practical solution to protect your walls from splashes and stains. Made from high-quality toughened glass, this splashback is durable and easy to clean, ensuring long-lasting beauty and functionality in your kitchen or vanity. With its pre-drilled holes and included screws and wall plugs, installation is a breeze. The clear silicone sealant provided ensures a secure and watertight seal, preventing moisture damage to your walls.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents