REALCRAFT Soft Stop Installation guide

Soft Stop
Brand
REALCRAFT
Model
Soft Stop
Type
Installation guide
(X2)
Bracket
(X4)
M4X16 Machine
tapping screw
Soft Stop
(X2) (X2)
Trigger
(X6)
M4X2 Self
tapping screw
(X4)
M4 Nut (X1)
Allen key
(Varies)
Spacer
8
1
Note: 1/8" Spacers are only
needed for tracks with more
than 4 holes.
STEP 1.
ATTACH THE SOFT STOP
TO THE BRACKET
STEP 2.
ATTACH THE SOFT STOP
AND BRACKET TO THE
TRACK SYSTEM If the track has more than 4 holes
STEP 3.
ATTACH THE TRACK TO
THE WALL OR LEDGER BOARD.
HANG THE DOOR AND MOVE IT
TO THE END OF THE TRACK OR
DESIRED POSITION.
ATTACH THE TRIGGER BETWEEN THE
TABS OF THE ACTUATOR. ADJUST THE
TRIGGER HEIGHT IF NEEDED.
down
up
SOFT STOP INSTALLATION GUIDE
For detailed instrucons go to bit.ly/so-stop
LESS MORE
adjust resistance
  • Page 1 1

REALCRAFT Soft Stop Installation guide

Soft Stop
Brand
REALCRAFT
Model
Soft Stop
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents