B-Tech B-TECH BT5962 CCTV and Flat Ceiling Mount Installation guide

Brand: B-Tech

Model: B-TECH BT5962 CCTV and Flat Ceiling Mount

Category: Flat panel ceiling mounts

Type: Installation guide

This manual is also suitable for

BT5962 CCTV and Flat Ceiling Mount

The B-Tech B-TECH BT5962 CCTV and Flat Ceiling Mount is a versatile mounting solution designed to securely hold both a flat-screen TV and a dome camera from a ceiling. With a weight capacity of up to 20kg for the screen and 5kg for the camera, this mount is suitable for a wide range of equipment. It comes in two pole lengths (1000mm and 2000mm) and is compatible with screens that have VESA fixings of 50 x 50mm, 75 x 75mm, and 100 x 100mm. The mount also features a carousel that can accommodate cameras with fixings from 51mm to 127.

BT5962

CEILING MOUNT

FOR a flat screen and a DOME CAMERA

INSTALLATION GUIDE

SPECIFICATIONS

www.btechavmounts.com

B-TECH AV mounts

• Mounts a at screen and a dome camera from the ceiling

• Max load: 20kg (screen) / 5kg (camera)

• Available in two Ø38mm pole lengths:

BT5962-FD100 pole length 1000mm

BT5962-FD200 pole length 2000mm

• Recommended for screens up to 28”

• Suitable for screens with VESA xings: 50 x 50mm,

75 x 75mm & 100 x 100mm

• Carousel suitable for cameras with xings from

51mm up to 127.5mm apart

• Integrated cable management

CAMERA SCREEN

Please pay careful attention to where this product is located. Check load capacity of the ceiling prior to installation as

some surfaces are not suitable for installation. Designed for indoor use, this mount is suitable for public or home installation

If located in a public or frequently populated area ensure that the product is out of the immediate reach of people.

If any AV equipment is to be suspended over the likely path or location of people then great care should be taken to

secure all parts of the installation from falling.

When drilling holes it is essential to avoid contact with electrical cables and water or gas pipes contained within.

Use of a good quality live wire detector and hidden object locator is therefore recommended.

Only drill into structures when you are sure it is safe to do so.

CONTENTS

Installation Safety Notes......................................................................................................................

Parts List....................................................................................................................................................

Installation Instructions.......................................................................................................................

Product Dimensions............................................................................................................................

B-Tech Contact Details........................................................................................................................

INSTALLATION SAFETY INSTRUCTIONS

CAUTION:

Do not attempt to install this product until all instructions and warnings have been read and properly understood.

Please keep these instructions for future reference.

Please check carefully to make sure there are no missing or defective parts - defective parts must never be used.

B-Tech AV Mounts, its distributors and dealers are not liable or responsible for damage or injury caused by improper

installation, improper use or failure to observe these safety instructions. In such cases, all guarantees will expire.

General

B-Tech AV Mounts recommends that a professional AV installer or other suitably qualied person install this product.

Great care must always be taken during installation as most AV equipment is of a fragile nature, possibly heavy and

easily damaged if dropped.

If you do not fully understand the instructions or are not sure how to install this product safely, then please consult a

professional for advice and/or to install this product for you. Failure to mount this product correctly may cause serious

injury or death, both during installation and at any time thereafter.

Do not mount any AV equipment that exceeds the specic weight limit of the product you are installing.

This weight limit will be clearly stated on each product and its packaging and will vary from product to product.

Product location

Fixing hardware

It is highly recommended that all xing screws be used where supplied and that the purpose of all other xing hardware

is fully understood. In some cases more AV equipment xing hardware will be supplied to accommodate dierent models

of equipment and set up congurations. The installer must be satised that any supplied xing hardware is suitable for

each specic installation.

If any xing screws or included hardware are deemed not sucient for a safe installation then please consult a professional

or your local hardware store.

Hazard limitation

When routing cables take advantage of any built in cable management features that the product might provide and ensure

that all cables are tidy and secure. Check to see that any moving aspect of the product can do so unhindered by any cabling.

Some products have moving parts and the potential to cause injury through the crushing or trapping of ngers or other

body parts.

Particular attention to the nature of moving parts is required especially when assembling installing and adjusting

during set up.

Immediately after installation double-check that the work done is safe and secure. Double-check all

necessary xings are present and are of ample tightness.

It is recommended that periodic inspections of the product and its xing points are made as frequently as possible (no more

than 6 months apart) to ensure that safety is maintained.

If in doubt consult a professional AV installer or other suitably qualied person.

This mount is intended for use only with the

maximum weights indicated. Use with equipment heavier than the maximum

indicated may result in instability causing possible injury.

BT5962 PARTS LIST

PLEASE KEEP THIS FOR FUTURE REFERENCE

Suitable for loads up to

20kg (screen) / 5kg (camera)

Drill

INSTALLATION TOOLS REQUIRED

ScrewdriverPencil

15 16 17

18 19 20

Spanner

ITEM DESCRIPTION QTY

1 CEILING PLATE 1

2 M8 x 10mm HEX SCREW 2

3 M6 x 5mm HEX GRUB SCREW 6

4 Ø38mm POLE 1

5 CEILING COVER PLATE 2

6 Ø38mm COLLAR 1

7 M8 x 12mm HEX SCREW 4

8 M6 x 8mm HEX GRUB SCREW 2

9 COLLAR COVER PLATE 2

10 MOUNTING PLATE 1

11 INTERFACE PLATE 1

12 M4 x 8mm PIN HEX SCREW 1

13 CAROUSEL INTERFACE 1

14 M4 x 12mm PIN HEX SCREW 4

15 M4 x 12mm SCREW 4

16 M4 METAL WASHER 4

17 M4 NUT 4

18 M6 x 10mm SCREW 4

19 M6 WASHER 4

20 M6 NUT 4

21 3AF HEX KEY 1

22 4AF PIN HEX KEY 1

23 5AF HEX KEY 1

INSTALLATION INSTRUCTIONS

iv. Add remaining ceiling xings and tighten all screws.

CEILING

MOUNT CEILING PLATE TO CEILING

i. Pre-drill holes for ceiling xings (not supplied).

ii. Assemble two xing screws on opposite sides, leaving a 10mm gap between

the screw head and ceiling.

FIXING SCREWS

Not supplied

(example shown)

10mm

Leave 10mm gap to

hook on ceiling plate

iii. Hook item 1 onto the xing screws and twist into position.

CEILING

FIXINGS

Note: Align ceiling

plate hole

with the

hole on the pole.

FIX POLE TO CEILING PLATE

i. Insert item 4 into item 1 and secure in place with item 2.

ii. Tighten item 3, xing item 4 to item 1.

iii. Fit item 5 to item 1.

FIX MOUNTING PLATE ONTO POLE

i. Attach item 10 to item 6 using item 7

Note: Ensure item 8 is positioned on the back of item 6.

ii. Slide item 6 up item 4 and secure at desired height

by tightening item 8.

CEILING

821

CEILING

iii. Fit item 9 onto

item 6.

Note: Align the hole on the

carousel interface with the

hole on the pole.

i. Attach item 13 to the bottom of item 4 using item 2.

ii. Tighten item 3, securing item 13 to item 4.

FIX CAROUSEL INTERFACE TO POLE

13 21

ATTACH CAMERA TO CAROUSEL INTERFACE

CAMERA

15 18

1916

2017

Fix the camera to item 13 using items 15 -20.

i. Hook item 8 onto item 10.

ii. Use item 12 to secure item 11 to item 10.

HOOK SCREEN ONTO MOUNTING PLATE

SCREEN

FIX INTERFACE PLATE TO SCREEN

Attach item 11 to the rear of the

screen using item 14.

TOP

BOTTOM

BT5962 DIMENSIONS

PLEASE KEEP THIS FOR FUTURE REFERENCE

THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO

LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.

CEILING MOUNT

CAROUSEL INTERFACE

SCREEN INTERFACE

30°

51mm

90mm

76mm

32.2mm

26mm

48mm

144mm

40.4mm

33.5mm

6.5mm

4 x

4.3mm

128.4mm

60.5mm

100mm

75mm

50mm

75mm

100mm

12 x

5mm

114mm

128.4mm

120mm

17mm

100mm

30°

68mm

8.5mm

101.5mm

8.5mm

40.4mm

30°

92mm

BT5962 DIMENSIONS

PLEASE KEEP THIS FOR FUTURE REFERENCE

THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO

LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.

BT5962-100: 1036mm / BT5962-200: 2036mm

BT5962-100:

901mm /

BT5962-200: 1901mm

20mm

30mm

144mm

128.4mm

103mm 32mm

38.1mm

44mm

2mm

14.9mm

23.9mm

62mm

For More Information Visit www.btechavmounts.com

B-TECH AV mounts

AMA-BT5962-V1.1-0821-110 MADE IN VIETNAM

B-Tech AV Mounts is a division of B-Tech International Design and Manufacturing Ltd.

B-Tech AV Mounts and the B-Tech logo are registered trade marks.

All other brands and product names are trademarks of their respective owners.

Photographs are for illustrative purposes only. E&OE.

CONTACT:

[email protected]

B-Tech B-TECH BT5962 CCTV and Flat Ceiling Mount Installation guide

Brand: B-Tech

Model: B-TECH BT5962 CCTV and Flat Ceiling Mount

Category: Flat panel ceiling mounts

Type: Installation guide

This manual is also suitable for

BT5962 CCTV and Flat Ceiling Mount

Download PDF

report

B-Tech B-TECH BT5962 CCTV and Flat Ceiling Mount Installation guide

This manual is also suitable for

B-Tech B-TECH BT5962 CCTV and Flat Ceiling Mount Installation guide

Related papers

Other documents