2. Baby & children
  3. Baby furniture
  4. Kingdely
  5. LBB-WFKF180069-01
LBB-WFKF180069-01

Kingdely LBB-WFKF180069-01 User guide

  • Hello, I'm your chat assistant. I've analyzed the user manual for the Baby Playpen. This document provides instructions on how to assemble, use, and fold the playpen, along with important safety warnings. I'm here to assist you with any questions you might have about using or maintaining your new baby playpen.
  • Can the baby sleep in the playpen?
    What is the weight limit for the playpen?
    What should I do before using the playpen?
    How do I clean the playpen?
BEFORE USE, PLEASE READ THIS MANUAL CAREFULLY
FOLDABLE BABY
P L AYPE N
Quick Reference Guide
(KEEP INSTRUCTIONS FOR FUTURE USE)
Read all instructions BEFORE assembly and USE of product
WARNING
!
WARNING
!
!
NEVER place product near a window where cords
from blinds or drapes can strangel a child.
NEVER add such items to confine child in prod-
uct.Child can become entrapped and die when impro-
vised netting or covers are placed on top of product.
NEVER leave child in product with sides lowered.Be
sure side is in.raised and locked position whenever child
is in product.
NEVER leave changing table in place when child is
in playard.
NEVER joints, broken parts or torn mesh/fabric,-
Check before assembly and periodically during use.
The product is designed exclusively for play and not for sleep
In gaps between a mattress too small or too thick and
product sides.
On soft bedding
Failure to follow these warnings
and the instructions could result in serious injury or
death.This product including side rails, must be fully
erected prior to use.Make sure latches are secure.
WARNING:
Keep away from fire.
WARNING Infants can suffocate
5. Pull up belt at middle of playpen, and fold the whole
playpen
4. Pull up tubes and pull up zippers L1-L4 at bottom
corners
SUFFOCATION HAZARD
INFANTS HAVE SUFFOCATED
In gaps between a mattress too small or too thick and
products sides
On soft bedding
NEVER add a mattress,pillow,comforter,or padding
NEVER use plastic shipping bags or other plastic
film as mattress covers not sold and intended for that
purpose.
They can cause suffocation.
Use only the mattress provided by manufacturer
NEVER leave child unattended.Child in playpen
must be under supervision at all times.
ALWAYS provide the supervision necessary for the
continued safety of your child.When used for playing
ALWAYS ensure that the playard is safety by check-
ing regularly ,before placing the child,check that every
part is properly secured in place
Suitable weights for child to use play-
pen will be from newborn to 13KGS
When child is able to pull to standing postion,remove
bumper pads,large toys and other objects that could
serveas steps for climbing out
This product is not intended for commercial use
WARNING
!
!
How to Fold
1.Take off G1-G4 fabric
cover pieces
2. Like direction of Narrow, release F1-F8 seperately and
pull up plastic&tubes
3. Like direction of Narrow,release lock system R1-R4
here
CONTACT (XIAMEN HONOR INDUSTRY AND
TRADING CO.,LTD) for replacement parts.
NEVER substitute parts.
STRINGS can cause strangulation! Never place
items with a string around a child’s neck such as hood
strings or pacifier cords.
NEVER suspend strings over product or attach
strings to toys.
DISCONTINUE use of the product when child is
able to climb out or reaches the height of 35 in. (890 mm).
TO reduce the risk of SIDS, pediatricians recommend
healthy infants be placed on their back to sleep, unless
otherwise advised by your physician.
NEVER leave child in product with side lowered. Be
sure side is in raised and locked position whenever child
is in product.
NEVER use this product if there are any loose or
missing fasteners, loose joints, broken parts, or torn
mesh/ fabric.
CHECK before assembly and periodically during use.
NEVER use a water mattress with this product.
NEVER place product near a window where cords
from blinds or drapes can strangle a child.
WARNING
!
4. Find out zippers at bottom corners, pull down the zip-
pers one by one like direction of narrow
5-A: Have tubes flat like direction of narrow
5-B: Meanwhile pull it up like direction of narrow, confirm
tubes R1-R4 connect well
5-A 5-B
6.Like direction of narrow, connect tubes and plastic
arround corners
7.Cover fabric pieces
around corners
IMPORTANT! To ensure safe operation of your
playard,pleasee follow these instructions careful-
ly.Please keep these instructions for future reference
MPORTANT! Before assembly and each use,
inspect this product for damaged hardware,loose joints,miss-
ing parts or sharp edges.NEVER use if any parts are
missing or broken.
MPORTANT! Adult assembly is required
MAINTENANCE AND CLEANING INSTRUCTIONS:
USE ONLY household mild soap and warm water
DO NOT USE BLEACH.
DO NOT MACHINE WASH
MAINTENANCE
AVERTISSEMENT
!
How To Unfold
1. Unzip the carry bag and check if all parts included like
below.If its short of anything, please contact with your
distributor
2.Release 3 buckles to take off carry bag, then take off
protective foam BH1-BH2
Importance : keep well carry bag&protective foam in
case of portable use; Package without protective foam
possibly leads playpen broken once heavily falling
A. playpen B.Instruction
BH01
BH02
3. Unfold the plapen like direc-
tion of narrow
Product Name: Foldable Baby Playpen
Materials: fabric+ foam+tubes+Plastics
Using For: Bedroom Sitting Rom Outdoor with solid ground
Product Discription
I (we) hereby certify that the product contained within this
shipment complies with all applicable rules, bans, regulations and
standards enforced by the CPSC. The following rules, bans, stan-
dards and regulations apply for this product
Standard
Suaitable Age: 0-36 months
Test item
Federal Regulations Title 16 CFR Part No. / Section
No.
Safety standard for paly yards 16 CFR Part 1221
Small Parts Rule 16 CFR Part 1501
Sharp Point Rule 16 CFR Part 1500.48
Sharp Edge Rule 16 CFR Part 1500.49
Flammable Solids 16 CFR Part 1500.3 (c) (6) (vi)
Total Lead
Consumer Product Safety Commission of U.S.A. Title
16, Code of Federal Regulation, part 1303 (16 CFR
Part 1303)
Total lead content in surface
coating and substrate
Consumer Product Safety Improvement Act of 2008
(Section 101)
Phthalates U.S. CFR Title 16 Part 1307
Important Information
Open and remove all parts from the box, and store the box
and packing material until the product is fully assembled.In the
case of return or replacement, there is limited compensation if
the return is inconsistent with the received product.Check to
make sure you have all the parts below. If you find anything
missing. please contact our customer service specialist immedi-
ately.To protect your product clean with a mild, non-friction
cleaner and water.Other washing or grinding materials can pos-
sibly damage the finished product.
Name Show
L1-L4Zipper R1-R4 Lock System F1-F4 Corner G1-G4 Cover
L1
R1
L2
R2
G1
F1
F3 F2
F4
G3 G2
G4
/