Hill-Rom Green Series 900 Procedure Light Assembly Instructions

Type
Assembly Instructions

This manual is also suitable for

Hill-Rom Green Series 900 Procedure Light Veterinary is a mobile surgical light designed for veterinary use, providing optimal illumination and flexibility for various surgical procedures. Its key features include:

  • Mobile Stand: The light is mounted on a mobile stand with four swivel casters, two with brakes for stability, allowing for easy positioning and maneuverability in the operating room.

  • Adjustable Height: The stand's height can be adjusted to accommodate different surgical needs and preferences, ensuring proper positioning of the light over the surgical field.

  • Spring Arm: A flexible spring arm with a disk and retaining ring allows for precise positioning and articulation of the light head to direct illumination accurately onto the surgical site.

Hill-Rom Green Series 900 Procedure Light Veterinary is a mobile surgical light designed for veterinary use, providing optimal illumination and flexibility for various surgical procedures. Its key features include:

  • Mobile Stand: The light is mounted on a mobile stand with four swivel casters, two with brakes for stability, allowing for easy positioning and maneuverability in the operating room.

  • Adjustable Height: The stand's height can be adjusted to accommodate different surgical needs and preferences, ensuring proper positioning of the light over the surgical field.

  • Spring Arm: A flexible spring arm with a disk and retaining ring allows for precise positioning and articulation of the light head to direct illumination accurately onto the surgical site.

1
GS 900 on Mobile Stand Assembly Instructions
2
GS 900 on Mobile Stand Assembly Instructions
Ships in 3 boxes
3
GS 900 on Mobile Stand Assembly Instructions
(2) wheels with brakes
(2) wheels without brakes
4
GS 900 on Mobile Stand Assembly Instructions
(2) wheels with brakes
go through the ring cable
(2) wheels without brakes
5
GS 900 on Mobile Stand Assembly Instructions
Place wheels with brakes through ring cable and
insert completely
6
GS 900 on Mobile Stand Assembly Instructions
Insert two wheels without brakes completely
7
GS 900 on Mobile Stand Assembly Instructions
8
GS 900 on Mobile Stand Assembly Instructions
Parts included with Mobile Stand
9
GS 900 on Mobile Stand Assembly Instructions
Tools not included
10
GS 900 on Mobile Stand Assembly Instructions
Insert two screws into pole
11
GS 900 on Mobile Stand Assembly Instructions
12
GS 900 on Mobile Stand Assembly Instructions
Insert the tripod tube so that the recess in the tube is seated in the nose of the tripod base and cannot be rotated any more
13
GS 900 on Mobile Stand Assembly Instructions
Assemble the
winged screw with
the spring washer
and tighten
14
GS 900 on Mobile Stand Assembly Instructions
15
GS 900 on Mobile Stand Assembly Instructions
Remove and discard
grey protective cover
16
GS 900 on Mobile Stand Assembly Instructions
Unscrew the
Phillips/plus-slotted
screw, pull the cover off,
pull cord through the top
opening and insert the
spring arm
17
GS 900 on Mobile Stand Assembly Instructions
Place the disk over spring arm
18
GS 900 on Mobile Stand Assembly Instructions
Place retaining ring over spring arm and secure into the pin groove
19
GS 900 on Mobile Stand Assembly Instructions
Make the electrical connection, tuck wires back inside, replace cover and tighten Phillips/plus screw
20
GS 900 on Mobile Stand Assembly Instructions
Remove and discard
grey protective cover
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27

Hill-Rom Green Series 900 Procedure Light Assembly Instructions

Type
Assembly Instructions
This manual is also suitable for

Hill-Rom Green Series 900 Procedure Light Veterinary is a mobile surgical light designed for veterinary use, providing optimal illumination and flexibility for various surgical procedures. Its key features include:

  • Mobile Stand: The light is mounted on a mobile stand with four swivel casters, two with brakes for stability, allowing for easy positioning and maneuverability in the operating room.

  • Adjustable Height: The stand's height can be adjusted to accommodate different surgical needs and preferences, ensuring proper positioning of the light over the surgical field.

  • Spring Arm: A flexible spring arm with a disk and retaining ring allows for precise positioning and articulation of the light head to direct illumination accurately onto the surgical site.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI