Supplementary sheet for the installation and operating instructions en
/ Overview of programmes
Supplementary sheet for the install ation and operati ng instructions
Programme/type of laundry/information Settings
Name of the programme: Brief explanation of the programme and for
which fabrics it is suitable.
Max. load; temperature
Spin speed*
Additional
programme settings
Cottons: Hard-wearing fabrics, heat-resistant fabrics made of cotton or
linen
Note: The Speed setting is suitable as a short programme for lightly soiled
laundry.
8 kg/5** kg;
20, 40, 60, 90 °C
- - - - , 0 - 1400* rpm
Speed/Eco, Aqua Plus
Cottons: û ,ú: Hard-wearing fabrics, heat-resistant fabrics made of
cotton or linen
Energy-optimised washing by reducing the temperature while achieving a
comparable washing result for the Cottons programme.
Note: The washing temperature is lower than the selected temperature. If
you want to achieve a particular water temperature, use the Cottons pro-
gramme with a higher temperature as required.
8 kg; 40, 60 °C
- - - - , 0 - 1400* rpm
Aqua Plus
Cottons + Prewash : for heavily soiled, hard-wearing fabrics, heat-resist-
ant fabrics made from cotton or linen
Note: Pour detergent into compartments I and II:
8 kg; 40 °C
- - - - , 0 - 1400* rpm
Speed/Eco, Aqua Plus
Rinse/Spin/Drain
Combined extra programme for rinsing and spinning the laundry, and drain-
ing the rinsing water
Note: The Aqua Plus setting is activated at the factory for this programme.
If you only want to spin the laundry: Deactivate the Aqua Plus setting
and, if required, adjust the spin speed.
If you only want to drain the water: Deactivate the Aqua Plus setting
button and select the spin speed 0.
-; -
- - - -, 0 - 1400* rpm
Aqua Plus
Easy-Care: Fabrics made of synthetic materials or blended fabrics 4 kg; 30, 40 °C
- - - -, 0 - 1200* rpm
Speed/Eco, Aqua Plus
* The maximum spin speed depends on the programme and model
** Reduced load for the Speed setting