2. Grizzly
  3. G0886

Grizzly G0886 Owner's manual

  • Hello! I've reviewed the datasheet for the Grizzly G0886 Metal Cutting Bandsaw. This document outlines the machine's specifications including its hydraulic headstock lifting, automated material feeding system, and multiple blade speed options. I'm ready to answer any questions you have about this machine.
  • What is the power requirement for this bandsaw?
    What is the recommended plug type for this bandsaw?
    What is the standard blade length?
    What are the available blade speeds?
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3
Model G0886
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0886 12" X 14" 3 HP 3‐PHASE AUTO METAL‐
CUTTING BANDSAW
Product Dimensions:
Weight............................................................................................................................................................ 1630 lbs.
Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 83 x 43 x 55 in.
Footprint (Length x Width)............................................................................................................................56 x 28 in.
Shipping Dimensions:
Type.......................................................................................................................................................... Wood Crate
Content........................................................................................................................................................... Machine
Weight............................................................................................................................................................ 1800 lbs.
Length x Width x Height....................................................................................................................... 85 x 48 x 62 in.
Must Ship Upright................................................................................................................................................... Yes
Electrical:
Power Requirement................................................................................................................... 220V, 3-Phase, 60 Hz
Full-Load Current Rating..................................................................................................................................... 13.0A
Minimum Circuit Size..............................................................................................................................................20A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length............................................................................................................................................... 12 ft.
Power Cord Gauge......................................................................................................................................... 12 AWG
Plug Included........................................................................................................................................................... No
Recommended Plug Type................................................................................................................................. L15-20
Switch Type..............................................................................................................Control Panel w/Magnetic Switch
Motors:
Main
Horsepower................................................................................................................................................ 3 HP
Phase.................................................................................................................................................... 3-Phase
Amps.............................................................................................................................................................. 8A
Speed................................................................................................................................................ 1735 RPM
Type...........................................................................................................................................TEFC Induction
Power Transfer ........................................................................................................................................ V-Belt
Bearings........................................................................................................ Sealed & Permanently Lubricated
Feed
Horsepower............................................................................................................................................. 1/8 HP
Phase.................................................................................................................................................... 3-Phase
Amps......................................................................................................................................................... 1.16A
Speed................................................................................................................................................ 1620 RPM
Type...........................................................................................................................................TEFC Induction
Power Transfer .......................................................................................................................................... Gear
Bearings........................................................................................................ Sealed & Permanently Lubricated
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 3
Model G0886
Hydraulic Pump
Horsepower................................................................................................................................................ 1 HP
Phase.................................................................................................................................................... 3-Phase
Amps........................................................................................................................................................... 3.6A
Speed................................................................................................................................................ 1420 RPM
Type...........................................................................................................................................TEFC Induction
Power Transfer .........................................................................................................................................Direct
Bearings........................................................................................................ Sealed & Permanently Lubricated
Coolant Pump
Horsepower............................................................................................................................................. 1/8 HP
Phase.................................................................................................................................................... 3-Phase
Amps......................................................................................................................................................... 0.26A
Speed................................................................................................................................................ 3600 RPM
Type...........................................................................................................................................TEFC Induction
Power Transfer .........................................................................................................................................Direct
Bearings........................................................................................................ Sealed & Permanently Lubricated
Main Specifications:
Operation Info
Blade Speeds.................................................................................................................92, 161, 236, 338 FPM
Std. Blade Length.............................................................................................................................. 155-1/2 in.
Blade Length Range.......................................................................................................... 155-1/4 - 155-3/4 in.
Cutting Capacities
Vise Jaw Depth.......................................................................................................................................... 14 in.
Vise Jaw Height................................................................................................................................. 6-11/16 in.
Max. Capacity Rectangular Height at 90 Deg................................................................................. 11-13/16 in.
Max. Capacity Rectangular Width at 90 Deg............................................................................................. 14 in.
Max. Capacity Round at 90 Deg......................................................................................................11-13/16 in.
Construction
Table.................................................................................................................................................... Cast Iron
Upper Wheel........................................................................................................................................ Cast Iron
Lower Wheel........................................................................................................................................ Cast Iron
Body........................................................................................................................................................... Steel
Stand.......................................................................................................................................................... Steel
Paint Type/Finish...................................................................................................................................... Epoxy
Other
Wheel Size.......................................................................................................................................... 15-3/4 in.
Blade Guides Upper..................................................................................................................... Carbide Steel
Blade Guides Lower.............................................................................................. Carbide Steel, Ball Bearings
Coolant Capacity.................................................................................................................................... 6.5 gal.
Hydraulic Capacity.....................................................................................................................................16 qt.
Other Specifications:
Country of Origin .............................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ........................................................................................................ 1-1/2 Hour
Serial Number Location ................................................................................................................... Machine ID Label
ISO 9001 Factory .................................................................................................................................................. Yes
Certified by a Nationally Recognized Testing Laboratory (NRTL) .......................................................................... No
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 3 OF 3
Model G0886
Features:
Hydraulic Headstock Lifting
Powered Vise Provides Automated Material Feeding
Proximity Sensor Provides Fully Automated Material Processing
Fine-Adjustment Control on Proximity Sensor Provides Precision Material Cutting
Blade Speeds: 92, 161, 236, 338 FPM
6.5 Gallon Coolant Tank
Powered Vise Provides Automated Material Feeding for Stock at Least 1 in. Thick
Accessories Included:
Proximity Sensor Support Arm
Processed Material Chute and Burr Catch
/