Kaysun Web Based Central Controller KAYNET CONTROL User manual

Brand: Kaysun

Model: Web Based Central Controller KAYNET CONTROL

Category: Split-system air conditioners

Type: User manual

OWNER’S MANUAL

KAYNET Software and Soft Dog.

Thank you very much for purchasing our product,

Before using it, please read this manual carefully and keep it for future reference.

NOTE

CONTENTS PAGE

● Thismanualgivesdetaileddescriptionoftheprecautionsthatshouldbebroughttoyour

attention during operation.

● Inordertoensurecorrectserviceofthispaper,pleasereadthismanualcarefullybefore

using the unit.

● Forconvenienceoffuturereference,keepthismanualafterreadingit.

● Astheproductupdates,thisdocumentwillbechangedwithoutpriornotice.

KAYNET INTRODUCTION ........................................................................................................................ 1

SOFTWARE INSTALLATION .................................................................................................................... 4

SETTING .................................................................................................................................................... 5

OPERATION INSTRUCTION ..................................................................................................................... 8

TROUBLESHOOTING ..............................................................................................................................32

APPENDIX ................................................................................................................................................34

Owner‘s Manual

1. KAYNET INTRODUCTION

1.1 KAYNET system introduction

KAYNETsystemistheshortnameofIntelligentManager.Itconsistsofthreeparts:KAYNETsoftware,

KAYNETM-interfacewebgatewayandV4+outdoorunitrefrigerantsystem.TheKAYNETsystemcan

connect4KAYNETM-interfacegatewaysatmost,totallycouldjoinup64refrigerantsystems.The

KAYNET software can communicate with network and KAYNET M-interface gateway, to control and

managetherefrigerantsystem.TheKAYNETsystemframeworkastheFig.1-1display.

KAYNET software installed in the computer, and the KAYNET M-interface gateway connects to the

computer through LAN port. Laptop and Pad can visit WEB page of KAYNET M-interface through

wireless network.

1.2 Models which could be inserted

1) Projectswhichdonotneedelectricquantitydivision:canfreelyinsertV4+units.

2) Projectswhichneedelectricquantitydivision:connecttheV4+seriesoutdoorunitsandindoor

units, and wiring the M-net terminal communication wire from the outdoor side.

3) Details consult relevant technical personnel.

1.3 KAYNET network introduction

KAYNETsoftwareincludesserversoftware,cline-sidesoftwareanddatabasesoftware.Installthe

serversoftwareandthedatabasesoftwareinthesame computer,thiscomputerandthe KAYNET

M-interfaceshouldbeinthesamesubnetsegment(fordetails,pleasereferto3.1).Thecline-sidecan

connect to the server through the local or remote network.

Fig.1-1

Owner‘s Manual

1.3.2 Remote network connection

Theclient-sideandserveralsocanusetheremotenetwork(VPN)connection.VPNhasrouter

establishingandcomputerestablishingmethods,andtheremotenetworkconnectionneedssome

ITknowledgeandneedstheITprofessionalstoassist.

1) Routerestablishing

VPNtunnelsestablishbetweenrouters,andthencanvisitWEBinterfacethroughVPNtunnels.

VPNServercanbeestablishedbyoneselfandalsocanberented.Itstopologystructureasfollow

display:

2)computerestablishing

UseVPN client-sidesoftwareandVPN ServertoestablishVPN tunnel,thenusercan visit

theserver throughVPNtunnel.VPNclient-sidesoftware andVPNServercanbe achievedby

commercialways.Itstopologystructureasfollowdisplay:

1.3.1 Local network connection

The cline-side can connect to the server through the local network, the local network connec-

tionasthefollowingdisplay:

Fig.1-4

Fig.1-3

Fig.1-2

Owner‘s Manual

1.4 KAYNET software functions

User can operate the KAYNET client-side software to monitoring the air-conditioning system.

ThefunctionsofferedbyKAYNETsoftwareasthefollowingdisplay:

Mainfunctionsasfollow:

1) Device monitoring

Offer control and management of indoor/outdoor unit for the KAYNET M-interface gateway.

2) Device guide

User can see the location of the air-conditioning device.

3) Schedule management

Offers schedule control function of indoor unit.

4) Energy saving management

Offers energy saving control function of indoor unit.

5) Statistics of energy consumption

Offerselectricquantitydivisionfunctionofair-conditioningsystem.

6) Device management

Offers the group division function of air-conditioning device.

7) Data statistics

Provides the status changing records of indoor unit, outdoor unit and KAYNET M-interface

gateway.

8) Log

Offersalltherecordsoftheclient-sideoperationswhichoperatedbytheuser.

Fig.1-5

Owner‘s Manual

Table.2-1

2. SOFTWARE INSTALLATION

2.1 Installation preparation

Before the KAYNET software installation, it needs to make sure the air-conditioning system

operatednormally,KAYNETM-interfacegatewayworkednormally,thecommunicationbetween

KAYNET M-interface gateway and air-conditioning system was normal, and it needs to meet the

followinghardwareandsystemrequirements.

2.2 Software installation

Aboutthe detailspleaseconsultrelevant technicalpersonnel.This systemneedstobe regularly

checkedbytheprofessionaltoensureitrunscorrectly.

Specication Recommendation Remark

CPU:i3orabove

Internalstorage:2Gorabove

Harddisk:120Gorabove

Keyboard/Mousewithmiddle

wheel

Network:108ASE-T

Screen resolution should over

1024*768

Screen size should over 17 inch

Recommended

thatIBMorDELL

products

Mustbedesktop

(Notebookcomputeror

other types of computers

is not allowed), and

ensure the computer

worksnormallybefore

installing the software.

System

Microsoft Windows XP Profes-

sional Service Pack 3/Windows7

Flagshipedition32-bitsystems.

Document

form

NTFS

Owner‘s Manual

Afterconguration,clickthe“OK”button.

3. SETTING

3.1 IP address setting

DefaultIPofKAYNETM-interfacegatewayis192.168.100.40,subnetcovercodeis255.255.255.0.

TheKAYNETM-interfacegateandKAYNETservermustbe stayedinthesamesubnetwork, two

waysof realization:amendtheKAYNETM-interfacegateIPandconfigurethe staticstateIPfor

server.

3.1.1 Congure static IP

Generallycongure singleIP,iftheIPaddressof computercannotbeamended,thencongure

severalIP.Methodsasfollow(Takewindows7systemforexample):

1) ConguresingleIP

Openthepropertydialogueboxtocongurethe IPaddressandsubnetcover code,forexample:

IP:192.168.100.44,subnetcovercode:255.255.255.0.

Fig.3-1

Owner‘s Manual

Fig.3-2

2)CongureseveralIP

BeforecongureseveralIP,itneedtocongureastatisticIPaddress.Openthepropertydialogue

box,selectthe“Advanced”,anddisplaytheTCP/IPsettingdialogueboxasfollow:

Clickthe “Add”buttoninIPaddressbar,addaIPaddressin thesamenetareawith

“192.168.100.40”,e.g.:IP:192.168.100.101,subnetcovercode:255.255.255.0,andthenclick the

“Add”button.

3.1.2 Amend gateway IP

BeforeamendingtheIPaddressofKAYNETM-interfacegateway,itneedsacomputertovisitthe

WEBpageofKAYNETM-interface,thenentertheIPaddressamendingpagethroughthecomputer.

Thepagedisplayasfollow:

Owner‘s Manual

Fig.3-3

Aftertyping,click“OK”tosave.DonotconictwithotherIPinthenetwork,detailedIPaddress

assignment needs to consult the network administrator.

3.2 Software operation setting

Beforesoftwareoperation,settheserversoftware,client-sidesoftwareanddatabasesoftware.

Aboutthedetailssettingpleaseconsultrelevanttechnicalpersonnel.Aftersetting,insertthedongle

(dongleisonlyusedforthissystem,pleasekeepthedongleproperly),andstarttheserversoftware

and then start the client-side software.

Owner‘s Manual

4. OPERATION INSTRUCTION

4.1 User login

OperatetheKAYNETclient-sidesoftware,popupthelogininterfaceasthefollowdisplay:

Fig.4-1

After“Connecttotheserversuccessfully”wasdisplayedatthelowerleftofthelogininterface,then

can carry out the login operations.

Stepsofcarryingouttheloginoperationsasfollow:

1）Type in user’s password, the default is user;

2）Choose whether save the password;

3）Click [OK] to carry out login;

4）Click[Cancel]toexitthispage;

Whenclickedthe“OK”button,afterloginsuccessfully,thenenterintothesystemhomepage.If

4.2 User log out

Click the icon onupper-rightcorner,exitthesystem,andtheinterfacedisplayasfollow:

Owner‘s Manual

4.3 System initialization

After the user login successfully, then will show out the system initialization dialogue frame, and

carry out the initialization of the whole system, update the system information. The itialization dialogue

framedisplayasfollow:

Fig.4-3

Fig.4-2

Owner‘s Manual

Function

Display

Information

tip

Clickthe“Exitthesystem”button,thenwillstoptheinitializationworkandexistthesystem.

4.4 Main interface introduction

Thesystemhomepagedisplayasthefollow:

Fig.4-4

Menu:systemfunctionsmenu.

Functions:functionsinmenu,includedevicemonitoring,schedulemanagement,energysaving

management,statisticsof energyconsumption,publicdevice,datastatistics andlogetc.functions.

Display:displaydetailedinformationofeachfunction.

Informationtip:displaythepromptmessageandalarminformation.

The upper-right corner of the interface will display the software version and user’s login name.

4.5 Devices monitoring

This part is displayed as 3 classes of air-conditioning indoor unit, outdoor unit and KAYNET

M-interfacegateway.Eachclasswillbedisplayedasprimarygroupandsecondarygroup.

E.g.:undertheindoorunititwilldisplaytheprimarygroup:Buildings;andundertheprimarygroup

itwilldisplaysecondarygroup:rstoor,secondoor,thirdooretc.Detailedgroupsettingplease

refersto4.10.

Owner‘s Manual

4.5.1 KAYNET M-interface gateway monitoring

Choose the KAYNET M-interface gateway selection; the interface will display all the KAYNET

M-interface gateway devices in the KAYNET system.

Fig.4-5

Thereare3displaystatusesofKAYNETM-interfacegateway:lostconnection,lockedandselected.

Whenselected orrightmouseclickaKAYNETM-interfacegatewaydevice,thebottom ofinterface

woulddisplay itsIPaddressanditwhether haslimitmode,andtheusercancontroltheKAYNET

M-interface gateway device through the method of setting the limit mode parameters, emergency

stopparameters and thenclickthe“send”button. Usercanamendthedevicename: double-click

thedevicename,thenamend it,andpressenterkeytosave.E.g.:selecttheKAYNETM-interface

gatewaydevices named40and41 (selectingmethodrefersto4.5.4),andchoosethe“limitmode”

parameters,andthenclickthe“send”button,thepagedisplayasfollow:

Fig.4-6

Owner‘s Manual

Parameters Specications

Limit mode Locked:cannotoperateintheWEBpageofKAYNETM-interface

Un-locked:RemovethelockingofKAYNETM-interfacegatewaydevice.

Emergency

stop

----:Notcarryouttheemergencystopfunction.

Stop:Carryouttheemergencystopfunction,stopallthedevicesofthe

KAYNET M-interface gateway.

Icon Specications Icon Specications

KAYNET M-interface

device work normal

KAYNET M-interface

device locked

KAYNET M-interface

device lost connection

KAYNET M-interface

device selected

Fig.4-7

Iconspecications: Table.4-2

Aftersuccessfullyset“Limitmode”,thedeviceiconwilladdaniconwithlocker.

Parametersspecications: Table.4-1

Statusselection:

Thegateway device has3statuses:locked( Locked ), lostconnection( Ofine ) and selected

(Selected ). Click the corresponding status icon to check the relative device. Click the lost connection

icon,anditwilldisplayallthedeviceswhichlostconnection.Rightclickthe“selected”icon,anditwill

popuptheselectionframeof“Allselect/cancelallselect”,choose“Allselect”thenitwillselectallthe

iconsintheinterface,andclick“cancelallselect”thenitwillcancelselectingalltheicons.

4.5.2 Outdoor unit monitoring

Select the outdoor unit class, the left side of interface will display the group information under the

indoor unit, and the right will display the corresponding outdoor device.

Owner‘s Manual

Icon Specications Icon Specications Icon Specications

Outdoor unit lost

connection(White)

OutdoorunitisOFF,

outdoorambienttemp.

is21°C.(Gray)

Outdoor unit operates

cooling,outdoorambient

temp.is24°C.(Blue)

Outdoor unit error

(Red)

Outdoor unit operates

heating, outdoor

ambienttemp.is24°C.

(Orange)

Outdoor unit is selected,

outdoorambienttemp.is

25°C.

Theoutdoorunitdisplaystatus:error,lostconnection,cooling,heatingandselected.Selector

rightmouseclickaoutdoorunit,thenchecktheonandoffstatus,ambienttemperature,ammeter

readingsetc.detailedinformationofthisdeviceinthe“Devicedetailsinformation”.

Iconspecications: Table.4-3

Fig.4-8

4.5.3 Indoor unit monitoring

Select the indoor unit class, the left side of interface will display the group information under the

indoorunit, andtherightwilldisplayall theindoorunitsinthe KAYNETsystem,select the“device

control”tocarryoutthecontroloperationforoneormoresetsindoorunits;selectthe“devicedetails

information”tochecktheoperatingdetailinformationofadevice.

1) Check the operating status of indoor unit

Choosethe “devicedetailinformation”,select aindoorunit,thenthebottomoftheinterfacewill

displaytheoperatingdetailinformationofthisdevice.Displayasfollow:

Statusselection:

Theoutdoor unitdisplaystatus:error( Error ),lost connection( Ofine ),cooling( Cool ), heating

(Heated ),offunit( Off )andselected( Selected ). Click the error, lost connection, cooling, heating and

selectediconsbythemouse,thentheinterfacewilldisplayallthecorrespondingstatus.E.g.:clickthe

cooling icon, then it will display the devices under cooling status in the selected group on the page,

displayasfollow:

Owner‘s Manual

Fig.4-9

Displayeddetail information:onandoffstatus,operating mode,devicenameand devicenumber

etc.

2) Control the operating status of indoor unit

Choosethe“Devicecontrol”,selectoneormoresetsindoorunits(selectingmethodrefersto4.5.4),

inthebottomofthe interfacecongureparameters:onandoffsetting,mode setting,operatingfan

speed,temperature settingandswingingsetting,andclick“send”buttonafter setting,displayas

follow:

Fig.4-10

Owner‘s Manual

Icon Specications Icon Specications Icon Specications

Indooruniterror

(Red)

Indoorunitoperates

heating,indoorambient

temp.is25°C.(Orange)

Indoorunitislocked,

indoorambienttemp.is

25°C.

Indoorunitlost

connection(White)

Indoorunitoperates

fan,indoorambient

temp.is25°C.(Green)

Indoorunitisselected,

indoorambienttemp.is

25°C.

Indoorunitoperates

cooling, indoor

ambienttemp.is

25°C.(Blue)

IndoorunitisOFF,

indoorambienttemp.

is25°C.(Gray)

The control order is

carrying out, please wait

Theinterface willdisplaytheicons whichwaitforbeing sent,aftertheorder execution,theicons

willdisappear,andtheinterfacewillberefresh,thencanviewtheoperatingstatusofthecontrolorder

hadbeen executed. Ifcontrolfailed,the“Prompt message” intheinterfacebottomwill display the

control failed information.

Iconspecication Table.4-4

Statusselection:

Theindoorunitdisplaystatus:error( Error ),lostconnection( Ofine ),schedule( Schedule ), cooling

(

Cool

),heating(

Heated

),fan( Fan ),offunit( Off ),locked( Locked )andselected( Selected ). Click

theerror,lostconnection,schedule, cooling,heating,fan,offunit,lockedand selectediconsbythe

mouse,thentheinterfacewilldisplayallthecorrespondingstatus.Rightclickthe“selected”icon,and

itwillpopuptheselectionframeof“Allselect/cancelallselect”,choose“Allselect”thenitwillselectall

theiconsintheinterface,andclick“cancelallselect”thenitwillcancelselectingalltheicons.Right-

clickthe “locked”icon,thenitwill displaythelockedlists,andclickthecorrespondinglistthenwill

display the relative devices.

4.5.4 Shortcut keys operation

Shortcutkeysoperationsofmouse:

The system offers shortcut keys operations of mouse, which convenient for the user to select/cancel

oneormoresetsdevicesquickly.

1) Select single icon

Left-click the icon, if the icon was framed then means it was selected.

2) Select several icons

Therearetwowaysforselectingseveralicons:

 ■Selectseveraliconsasthewayofselectingsingleicon.

 ■Left-clickoutsidetheframeintheinterface,dragadottedlineframetoselectthecorresponding

icons.

3) Cancel single selected icon

Left-click on the selected icon, then cancel selecting the icon.

4) Cancel several selected icons

Therearetwowaysforcancelingseveralselectedicons:

■Cancel several selected icons as the way of canceling single selected icon.

■

Double-clicktheleft/middle/rightkeyofthemouseintheblankplaceofthepage,tocancel

several selected icons.

Owner‘s Manual

Functionshortcutkeysoperations

Right-click the Selected icon,thenitwillpopuptheselectionframeof“Allselect/cancelallselect”,

choose“All select”and“Cancelallselected”to selectandcancelquickly.Theoperationstepsas

follow:

1）Selectthe“indoorunit”or“outdoorunit”class(orprimarygrouporsecondarygroup).

2）Clickastatusdisplayicon(cooling,heating,error,offunitetc.),suchasclickthecoolingstatus

icon, the interface will display the devices of corresponding group under cooling status.

3)Clickthe“selectall”option,thenallthecoolingdeviceinthepagewillbeselected,andifclick

the“canceltheselectedall”,alltheselectediconswillbecanceledselecting.

4.6 Device guide

Offer the function of user can see the location of the air-conditioning device. Right click one

secondarygroup,willpop-uptheoptionsof“Startchangingdevice’slocation”and“Changetheoor

plan”,andclick“Changetheoorplan”,thendisplayasfollow:

Fig.4-11

Userselects thecorrespondingfloorplan (thepicturewillsaveinthemapfolderoftheclient-

sideinstallationmenus),andthenclick“Save”button,afternishedtheoperation,thenclick“Close”

button.Afterselecttheoorplan,thenclick“Startchangingdevice’slocation”,usercan selectone

device, and then drag it on the interface to change its location.

Owner‘s Manual

4.7 Schedule management

Schedule management offers the schedule operations for air-conditioning indoor unit. Display as

follow:

2) Schedulemanagementoperationstepsasfollow:

 ■Add the name

Fig.4-13

Fig.4-12

Clickthe“Add”button,typeinschedulename.

 ■Adddevice

 Clickthe“Deviceselecting”button,thenitwillpopuptheadddeviceframeasthefollowing

display:

Owner‘s Manual

Fig.4-14

Clickthe “Non-selecteddevice”option,selectthe deviceandclickthe“add”button.Clickthe

“Selecteddevice”option,andthenitshowsuptheselecteddevices.Choosetherelativedevices,and

click“Move”tomovethedevicesinto“Non-selecteddevice”.Afterselection,click”OK”andthenclose

the selection frame. The page will display the selected devices.

Fig.4-15

Page is loading ...

Kaysun Web Based Central Controller KAYNET CONTROL User manual

Brand: Kaysun

Model: Web Based Central Controller KAYNET CONTROL

Category: Split-system air conditioners

Type: User manual

Download PDF

report

Kaysun Web Based Central Controller KAYNET CONTROL User manual

Kaysun Web Based Central Controller KAYNET CONTROL User manual

Related papers

Other documents