2. Minebea Intec
  3. YDP05 Label Paper and Strip Printer Required Settings

Minebea Intec YDP05 Label Paper and Strip Printer Required Settings Owner's manual

  • Hello! I've reviewed the installation instructions for the Minebea Intec YDP05 printer. This document covers configuration settings for label paper and strip printers used with Combics, Midrics, and Signum scales. I am ready to assist you with questions regarding the setup process and printer configuration.
  • What is the document about?
    What products are covered by this document?
    What kind of printers are described in this document?
    Where was this document printed?
Installation Instructions
Minebea Intec YDP05
Label Paper and Strip Printer Required Settings
Printer configuration, Menu Structure
Druckerkonfiguration, Menüstruktur
Configuration de l’imprimante, Menu Structure
La configurazione della stampante, Struttura del menu
Configuración de la impresora, la estructura del menú
Combics 1-2, Midrics 1-2, Signum 1-3
setup /com-1 Printer
YDP04IS
LINE Strip printer
LABEL Label printer
LAB FF Label printer with manual feed
Combics 3
setup /com-1
Printer 1
YDPO4IS Strip printer
Label printer
98627-000-16
98627-000-16
Minebea Intec Bovenden GmbH & Co. KG
Leinetal 2, 37120 Bovenden, Germany
Phone: 49.551.309.83.0
Fax: 49.551.309.83.190
www.minebea-intec.com
Copyright by Minebea Intec, Bovenden,
Germany. No part of this publication may
be reprinted or translated in any form or by
any means without prior written permission
from Minebea Intec. All rights reserved by
Minebea Intec in accordance with copyright
law. The information and figures contained
in these instructions correspond to the
version date specified below. Minebea Intec
reserves the right to make changes to the
technology, features, specifications, and
design of the equipment without notice.
Date: January 2017
Printed in Germany on paper that has been
bleached without any use of chlorine.
RS · KT
Publication No.: YDPWYD8002-e17012
/