cindy crawford 7921002P Assembly Instructions

ASSEMBLY INSTRUCTIONS

SHGP HAMPTON'S COVE FIRE PIT

Manufactured for Rooms To Go SKU 79110020+79210022

Thanks for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come

loose inside the carton during shipment. Identify and count all parts and compare with the Hardware List below

Step 1: Place the Table Base (Part B) on a clean, soft surface as a blanket or carpet. Remove the Fire Pot(Part J) from the Table

base by loosening bolt (Part K) and washers (Part F)with Allen key (Part C).

Step 2: Assemble the Ceramic washer (Part G) between the Fire Pot(Part J) and table base by Bolt(Part K) and Washers(Part F),

tighten them with Allen key (Part C).

Page 1,total 3

Step 3: Assemble the Top (Part A) to the Base by Bolt(M6*25) (Part E) and Washer(Φ16*Φ6.5)(Part F), tighten them with Allen key

(Part C).

Step 4: After tightening all bolts, your product is ready for use.

Page 2,total 3

PARTS LIST PARTS LIST

NO.: PIC DESC QTY NO.: PIC DESC QTY

A Table Top 1pc E Bolt(M6*25) 4pcs

B Table Base 1pc F Washer 4pcs

C Allen key 1pc G Washer 4pcs

D Burner Lid 1pc

Periodically check and make sure all bolts are fully tightened.

Page 3,total 3

Download PDF