Enter
Enter
Enter
1
2
3
QUICK START GUIDE
Automatic calf feeder smart
1.6.1 Cleaning with one detergent
settings
cleaning
Cleaning settings
cleaning
Automatic
Time Cleaning
10:00 Mixer
16:00 Hose
22:00 Mixer
...
Manually
This document shows the settings for cleaning a powder machine with one detergent as of software version 5.1.
cleaning
This checklist is based on the basic equipment of an automatic feeder. Possible extensions are not listed separately. Detailed information and the applicab-
le warnings and safety instructions can be found in the corresponding operating instructions. (Status 23/09)
temperature : 45°C
detergent : * 5ml/L
Teat cleaning : [ no ]
hose length
Drainage mode : [ yes ]
Rinse hose
cleaning plan
manual start Mixer
auto. circuit clean.
Sponge
Start draining mode
Refer to the instructions of the detergent manufacturer for the recommended settings
* Standard 0 ml / L
Only with HygieneBox
temperature during the cleaning
process max. 58°C
amount of detergent / liter
after cleaning water is pumped
through the suction hose
drainage function of the suction
hoses
Only with HygieneBox: Adjustable
per feeding station (in m)
< group A - D >
active : [ yes]
as of plan day: 14 starting
date
[ yes/no ]
(Not with IFS pump!)
After complete feeding of a portion,
0.25L of warm water is dosed out and
the hose is cleaned.
Set times Can be selected depen-
ding on the equipment
Hose = HygieneBox
Setting the parameters for automatic cleaning
Cleaning processes can also be started manually
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI