2. Salamander Designs
  3. Heavy Duty Casters

Salamander Designs Heavy Duty Casters User manual

  • Hello! I've reviewed the document regarding heavy-duty caster installation for Salamander Designs' Chameleon and Synergy cabinets. This document details the wheel placement options, drilling patterns, and use of various fasteners. I'm ready to assist you with any questions you have regarding these instructions.
  • What types of bolts are used for greyed holes?
    What should be done with black holes before attaching wood screws?
    What is the purpose of cross-hatched holes?
HEAVY DUTY
CASTERS
SYNERGY
CABINET
POSITIONING WHEEL BASEPLATE
DRILLING PATTERN
A. Position the wheel baseplate so that it matches the drawing below:
B. Drill holes & fasten as shown in the drilling pattern to the left:
Greyed holes use joint connector bolts (JCB)
Black holes will need to be pre-drilled before attaching with supplied
wood screw. Using a drill & supplied bit, predrill to the marked depth
of the bit. Attach with supplied wood screws.
Not used.
C. Fasten posts not requiring wheels with provided JCB bolts.
Doc No. 500-426/v10.23 ©2023 Salamander Designs Ltd.
WHEEL PLACEMENT
CHAMELEON SYNERGY
SINGLES
TWINS
TRIPLES
QUADS
WHEELS
WITH BRAKES
A
B
C
CHAMELEON
CABINET
SYNERGY
CHAMELEON
CABINET BOTTOM
CABINET BOTTOM
MARKED DEPTH
WOOD SCREW
Cross hatched holes use silver button head bolts.
/