GE JXS96BB Installation guide

GE
Brand
GE
Model
JXS96BB
Type
Installation guide

This manual is also suitable for

Installation Instructions
Lower Trim Kit For Drop-In Ranges
Tools Required:
#2 Phillips screw driver
Drill with 1/8” Bit
Installing the Kit
Follow the Installation Instruction for the Drop-In Range to complete the installation.
A
A1
Locate the lower trim panel in the cabinets at the bottom of the opening, making sure that its
location does not enter the 27 1/4” space required for the range.
A2
Align the panel flush with the front surface of the cabinets and tighten the screws in the pilot
holes.
A3
Pub. No. 31-10459
229C4053P436
Align the front of the supplied panel with the front edge of the cabinets. Mark the location of the
4 slots and drill 4- 1/8” Dia. pilot holes.
A4
Prior to installing the Drop-In Range, this kit should be installed:
Parts Supplied
Trim Panel
4 screws
This Kit is intended to be supplied for New Drop -In Ranges (JD966 and JDP46) or applications
replacing Drop-In Ranges JDP36XXXXX, JDP39XXXXX, JDP46XXXXX, and JDS26XXXXX or
other deep cutout Drop-In Ranges.
(4)
SCREWS
27 1/4"
Min.
LOWER TRIM
  • Page 1 1

GE JXS96BB Installation guide

GE
Brand
GE
Model
JXS96BB
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents