2. GE
  3. JXS96BB

GE JXS96BB, JXS96CC, JXS96WW Installation guide

  • Hello! I am an AI chatbot trained to assist you with the GE JXS96BB Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation Instructions
Lower Trim Kit For Drop-In Ranges
Tools Required:
#2 Phillips screw driver
Drill with 1/8” Bit
Installing the Kit
Follow the Installation Instruction for the Drop-In Range to complete the installation.
A
A1
Locate the lower trim panel in the cabinets at the bottom of the opening, making sure that its
location does not enter the 27 1/4” space required for the range.
A2
Align the panel flush with the front surface of the cabinets and tighten the screws in the pilot
holes.
A3
Pub. No. 31-10459
229C4053P436
Align the front of the supplied panel with the front edge of the cabinets. Mark the location of the
4 slots and drill 4- 1/8” Dia. pilot holes.
A4
Prior to installing the Drop-In Range, this kit should be installed:
Parts Supplied
Trim Panel
4 screws
This Kit is intended to be supplied for New Drop -In Ranges (JD966 and JDP46) or applications
replacing Drop-In Ranges JDP36XXXXX, JDP39XXXXX, JDP46XXXXX, and JDS26XXXXX or
other deep cutout Drop-In Ranges.
(4)
SCREWS
27 1/4"
Min.
LOWER TRIM
/