aqprox! appKBWS01 User manual

Category
Keyboards
Type
User manual

This manual is also suitable for

Español.......................................................... 1
English........................................................... 4
Français......................................................... 7
Deutsch.......................................................... 10
Italiano........................................................... 13
Português ...................................................... 16
Caution: to use this device properly, please read the user’s guide before installation.
ireless keyboard and optical mouse are using two AAA alkaline batteries.
Insta
as shown inside the battery compartment
Step 3. Replace the cover
Installing the batteries
W
lling batteries in the mouse
Step 1: open the battery compartment
Step 2: Insert the batteries
Insta
rtment cover on the bottom of keyboard by squeezing the
as shown inside the battery compartment
Step 3 Replace the cover
lling the batteries in the keyboard
Step 1:Remove the battery compa
cover in from the tab to release it
Step 2: Insert the batteries
4
Connecting the receiver
1. Insert the receiver into an USB port of your Notebook or PC.
Storage of the receiver in the mouse
1. When you want to use the mouse, you can take out the receiver to computer by the list 1 step
2. When you need stop the work or go to travel, you can store the receiver on the bottom of
mouse for the moving by the list 2 step
Hotkeys on the keyboard
This keyboard have 4 hotkeys located on the top of keyboard
Web Home
E-mail
Media
Calculator
5
Power-Save function
This mouse is equipped with Traveling-power-save function,
When you are travelling with this mouse, this Led of the mouse will be switched off automatically
hen your mouse no any clik or scroll or moving, the mouse will come into sleeping state for the
the wake up, you can click any button for this
n
batteries
to the USB port of PC or notebook
or the keyboard, you can press the keys of “ESCAnd “Q”at the same time, then insert the nano
ceiver onto the USB port of PC or Notebook.
for the purpose of power-save, but the pre-condition is that the receiver is disconnected with your
notebook or PC.
W
econamize after about 30 minutes, for
Restoring factory default settings
When you find this set doesn’t work, you can make the mouse or keyboard in working conditio
by restoring the mouse back to factory default settings
check the battery volume is normal, if the battery is used out, please replace the new
For the mouse, you could press the right button and middle button(under the scroll wheel)
simultaneously, then insert the nano receiver on
F
re
6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

aqprox! appKBWS01 User manual

Category
Keyboards
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI