Craftsman 580.752210 User manual

Brand: Craftsman

Model: 580.752210

Category: High-pressure cleaners

Type: User manual

This manual is also suitable for

Operator'siVlanual

3000 PSi MAX

2.7 GPMMAX

Model No. 580.752210

WAReleG

Before usingthis product, readthis

manualand follow all SafetyRules

and Operating Instructions.

I_ J7ADVERTENCJA

Antes de utilizarel producto, leaeste

manualy siga todas las Reglasde

Seguridade Instrucciones deUso.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Visit nut Craftsman website: www.craftsman.cnm

Part No. 205712GS Draft - (12/13/2007)

• Safety

• Assembly

• Operation

,, Maintenance

,, Parts

,, Espafiol, p. 32

oI!!!!U!JJ!U

WARRANTY.......................................... 2

SAFETYRULES...................................... 2-5

FEATURESANDCONTROLS.............................. 6

ASSEMBLY........................................ 7-10

OPERATION....................................... 11-15

SPECIFICATIONS..................................... 16

MAINTENANCE.................................... 17-21

STORAGE........................................... 22

TROUBLESHOOTING.................................. 23

REPLACEMENTPARTS.............................. 24-29

EMISSIONCONTROLWARRANTY..................... 30-31

ESPANOL......................................... 32-55

HOWTO ORDERPARTS........................ BACKPAGE

ONE-YEARFULLWARRAHTYONCRAFTSMAHPRESSUREWASHER

If this pressurewasher fails dueto a defectin material or workmanship within one year from the dateof purchase,return it to

any Searsstore, other Craftsman outlet, or SearsParts & RepairCenterin the UnitedStates or Canadafor free repair (or

replacementif repair proves impossible).

All warranty coverageapplies for only 90 days from dateof purchaseif this pressure washer is ever usedfor commercial or

rentalpurposes.

This warranty gives you specific legal rights, and you mayalso haveother rights which vary from stateto state.

Sears, Roebuck and Co., Hoffman Estates, IL 60178

Sears Canada Inc., Toronto, Ontario, Canada M5B 288

,_ Thisisthe safetyalert symbol.It isusedto alert youtopotentialpersonalinjuryhazards.Obeyall safetymessages

thatfollow thissymboltoavoid possibleinjuryor death.

_Read this manualcarefully and becomefamiliar

with yourpressurewasher. Knowits applications,

its limitations, and any hazardsinvolved.

Hazard Symbolsand Meaninos

ToxicFumes HazardousChemical ElectricalShock

2 5-

SlipperySurface Fall FluidInjection

Thesafety alert symbol (_.) is usedwith a signal word

(DANGER,CAUTION,WARNING),a pictorial and/or a safety

messageto alert you to hazards.BANGERindicatesa hazard

which, if not avoided, willresult in deathor serious injury.

WARNINGindicates a hazardwhich, if not avoided, could

result in deathor serious injury. CAUTIONindicatesa hazard

which, if not avoided, might result in minor or moderate

injury. NOTICEindicatesa situation that could result in

equipment damage. Follow safety messagesto avoid or

reducethe risk of injury or death.

Fire

Explosion Operator'sManual

MovingParts

FlyingObjects

Kickback HotSurface

WARHJNG

Theengineexhaustfromthisproductcontains

chemicalsknowntotheState of California tocause

cancer,birthdefects,or otherreproductiveharm.

DANGER

Contentsare harmful or fatal if swallowed. Avoid

contact to eyes,skin or clothing. DONOTtake

internally. Avoid breathing the mist or vapor.

Overexposureto eyes or skin cancauseirritation.

Keepstabilizer out of the reachof children.

Fuelstabilizer is a hazardouschemical.**

. FreshStartTM fuelcapisdesignedto holda cartridgewhich

containsfuelstabilizer.

. If SWALLOWED,callphysicianimmediately.DONOTinduce

vomiting.If inhaled,removetofreshair.In caseofeyeor skin

contact,flushwithwaterfor 15minutes.

. Storeunopenedcartridgesin acool,dry,wellventilatedarea.

Keepopencartridgein fuelcap,andfuelcapclosedonfueltank

whennotinuse.

. Inthecaseof anemergency,contacta physicianimmediately

andcall1-800-424-9300for materialsafetyinformation.

**Fuel stabilizer contains: 2,6-di-tret-butylpbenol (128-39-2) and aliphatic petroleum

distillate (64742-47-8).

WARHJHG

Runningengine gives off carbon monoxide, an

odorless, colorless, poison gas.

Breathingcarbon monoxide can cause headache,

_ atigue, dizziness,vomiting, confusion, seizures,

nausea,fainting or death.

Some chemicals or detergents may be harmful if

inhaled or ingested, causing severe nausea,

fainting, or poisoning.

. OperatepressurewasherONLYoutdoors.

• Keepexhaustgasfromenteringaconfinedareathrough

windows,doors,ventilationintakes,or otheropenings.

• DONOTstartor runengineindoorsor in anenclosedarea,

evenif windowsanddoorsareopen.

. Usea respiratoror maskwheneverthereisachancethat

vaporsmaybeinhaled.

. Readall instructionswith masksoyouarecertainthemaskwill

providethenecessaryprotectionagainstinhalingharmful

vapors.

WARHJHG

_ uel and its vapors are extremely flammable and

explosive.

Fireor explosion cancause severe burns or

death.

WHENADDINGORDRAININGFUEL

• TurnpressurewasherOFFandletit coolatleast2 minutes

beforeremovingfuelcap.Loosencapslowlyto relievepressure

in tank.

• Fillor drainfueltankoutdoors.

. DONOToverfilltank.Allowspaceforfuelexpansion.

• Iffuelspills,waituntilit evaporatesbeforestartingengine.

. Keepfuelawayfromsparks,openflames,pilotlights,heat,and

otherignitionsources.

. DONOTlighta cigaretteorsmoke.

WHENSTARTINGEQUIPMENT

. Ensuresparkplug,muffler,fuelcap,andair cleanerarein

place.

• DONOTcrankenginewith sparkplugremoved.

WHENOPERATINGEQUIPMENT

• DONOTtip engineor equipmentat anglewhichcausesfuelto

spill.

. DONOTsprayflammableliquids.

WHENTRANSPORTINGORREPAIRINGEQUIPMENT

• Transport/repairwithfueltank EMPTYor withfuelshutoffvalve

OFF.

• Disconnectsparkplugwire.

WHENSTORINGFUELOBEQUIPMEHTWITH FUELIN TAHK

• Storeawayfromfurnaces,stoves,waterheaters,clothes

dryers,or otherappliancesthathavepilotlightor otherignition

sourcebecausetheycanignitefuelvapors.

WARHJHG

_¢ iskof electrocution.

Contactwith power sourcecan causeelectric

shock or burn.

• NEVERspraynearpowersource.

WARHJHG

Startercord kickback(rapid retraction) can result

in bodily injury. Kickbackwill pull handand arm

_,_.< toward engine faster than you can let go.

Brokenbones, fractures, bruises, or sprains

could result.

• NEVERpull starter cord without first relieving spray gun

pressure.

. When starting engine, pull cord slowly until resistanceis felt

andthen pull rapidly to avoid kickback.

• After eachstarting attempt, where enginefails to run, always

point spray gun in safe direction, press red button and squeeze

spray gun trigger to releasehigh pressure.

• Firmly grasp spray gun with both handswhen using high

pressure spray to avoid injury when spray gun kicks back.

WARHIHG

Useof pressure washer cancreate puddles and

slippery surfaces.

Kickbackfrom spray gun cancause you to fall.

. Operatepressure washer from astable surface.

• The cleaningarea should haveadequateslopes and drainageto

reducethe possibility of afall due to slippery surfaces.

. Be extremelycareful if you must usethe pressure washer from

a ladder,scaffolding, or any other similar location.

• Firmly grasp spray gun with both hands when using high

pressure spray to avoid injury when spray gun kicks back.

WARHIHG

_ Contact with muffler result in serious

area can

burns.

_ Exhaustheat/gases can ignite combustibles,structures or damagefuel tankcausing a fire.

• DO NOTtouch hot parts andAVOID hot exhaust gases.

. Allow equipment to cool before touching.

• Keepat least 5feet (152 cm) of clearanceon all sides of

pressure washer including overhead.

• Codeof FederalRegulation (CFR)Title 36 Parks, Forests,and

Public Property require equipment powered by an internal

combustion engine to haveaspark arrester, maintained in

effective working order, complying to USDAForestservice

standard 5100-1C or later revision. Inthe State of California a

spark arrester is requiredunder section 4442 of the California

Public resources code. Other statesmay havesimilar laws.

WARHIHG

The high pressure stream of water that this

equipment produces can cut through skin and its

_ nderlying tissues, leading to serious injury and

)ossible amputation.

Spray gun traps high water pressure, even when

engine is stopped and water is disconnected,

which can cause injury.

• DONOTallow CHILDRENto operate pressure washer.

. NEVERrepair high pressure hose. Replaceit.

• NEVERrepair leaking connections with sealantof any kind.

Replaceo-ring or seal.

• NEVERconnect high pressure hoseto nozzle extension.

. Keephigh pressure hose connectedto pump and spray gun

while system is pressurized.

• ALWAYSpoint spray gun in safe direction, pressred button

and squeezespray gun trigger to releasehigh pressure, every

time you stop engine.

• NEVERaim spray gun at people, animals, or plants.

. DONOTsecure spray gun in open position.

• DO NOTleavespray gun unattendedwhile machine is running.

. NEVERusea spray gun which does not have atrigger lock or

trigger guard in place and in working order.

. Always be certain spray gun, spray tips and accessories are

correctly attached.

WARHIHG

_ Unintentionalsparking can result in fire or

_¢ electric shock.

WHENADJUSTINGORMAKINGREPAIRSTOYOUR

PRESSUREWASHER

. Disconnectthe sparkplug wire from the spark plug and place

the wire where it cannot contact spark plug.

WHENTESTINGFORENGINESPARK

. Use approved sparkplug tester.

• DONOTcheck for sparkwith spark plug removed.

WARHJHG

Starter and other rotating parts canentangle

hands, hair, clothing, or accessories.

* NEVERoperate pressure washer without protective housing or

covers.

* DO NOTwear loose clothing, jewelry or anything that may be

caught in the starter or other rotating parts.

* Tie up long hair and remove jewelry.

WARNING

Risk of eye injury.

" _ JSpraycan splash back or propel objects.

Alwayswear safetygoggles when using this equipment or in

vicinity of where equipment is in use.

Beforestarting the pressure washer, be sureyou are wearing

adequatesafetygoggles.

NEVERsubstitute safety glasses for safetygoggles.

[ NOTICE

High pressure spray may damage fragile items including

[g ass.

L O NOTpoint spray gun at glasswhen using MAX (0°) nozzle.

NEVERaim spray gun at plants.

NOTICE

Improper treatment of pressure washer can damage it and

shorten its life.

Ifyou have questions about intended use, ask dealer or contact

Sears.

NEVERoperate units with broken or missing parts, or without

protective housing or covers.

DONOT by-pass any safetydevice on this machine.

DONOTtamper with governed speed.

DONOToperate pressurewasher above rated pressure.

DONOT modify pressure washer in any way.

Before starting pressure washer in cold weather, check all parts

of the equipment to besure ice has not formed there.

NEVERmove machine by pulling on hoses. Use handle

provided on unit.

Checkfuel system for leaksor signs of deterioration, such as

chafed or spongy hose,loose or missing clamps, or damaged

tank or cap. Correct all defects beforeoperating pressure

washer.

This equipment is designedto be usedwith Searsauthorized

parts ONLY.If equipment is used with parts that DO NOT

comply with minimum specifications, userassumes all risks

and liabilities.

KNOWYOURPRESSUREWASHER

_Head the Operator'sManual and safety rulesbeforeoperatingyourpressurewasher.

Comparethe illustrations with your pressurewasher to familiarizeyourself with the locations of various controls and

adjustments. Savethis manualfor future reference.

A - Spray Gun-- Controlsthe application of water onto

cleaningsurfacewith trigger device.Includestrigger lock.

B- PrecisionSprayTM Nozzles -- Max, General,Flush,Jet

Soap and DetergentNozzles:for various cleaning

applications.

C- Accessory Tray-- Providesconvenient storage for

accessories, such as gun, nozzles,etc.

O - Recoil Starter -- Used for starting the engine manually.

E - FuelTank-- Filltank with regular unleadedfuel. Always

leaveroom for fuel expansion.

F - Air Filter -- Protects engine by filtering dust and debris

out of intake air.

6 - ThrottleLever-- Setsengine in starting mode for recoil

starter and stops a running engine.

H - ChokeLever -- Preparesa cold engine for starting.

J - Pump -- Developshigh pressure.

I{ - Automatic CoolDownSystem -- Cycleswater through

pump when water reaches125°-155°F. Warm water will

dischargefrom pump onto ground. Thissystem prevents

internal pump damage.

L - High Pressure Outlet -- Connectionfor high pressure

hose.

M - Water Inlet -- Connectionfor garden hose.

N - Bottle Bracket -- Cleaningsolution bottle fits in wire

form bracket here.

P - NozzleExtensionwith QuickConnect-- Allows you to

switch betweenfive different PrecisionSprayTM nozzles.

R - Oil Fill/Dipstick -- Check,add and drain engine oil here.

S - HoseWrap and High PressureHose-- Hosewrap

provides easy transport and handling of the high pressure

hose. Connectoneend of hoseto water pump and the

other end to spray gun.

T - FoldDownHandle-- Handleand accessorytray fold flat

atop cold engine for space-savingstorage.

U - ProjectPro@PerfectlVlWMSiphon -- Mixes concentrate

with pressurewasher spray.

Items Not Shown:

DataTag (near rear of base plate} -- Provides model and

serial number of pressure washer. Pleasehavethese readily

availableif calling for assistance.

Safety Goggles-- Always usethe enclosedsafety goggles

when running your pressure washer.

Warning/Operating instructionsTag-- identifies hazards

and proper procedureto start/stop pressure washer.

Your pressure washer requires some assembly and is ready

for useonly after it has been properly servicedwith the

recommendedoil and fuel.

If you haveany problemswith the assemblyof your

pressurewasher, please call the pressurewasher heipline

at 1-800-222-3135.

UNPACKTHEPRESSUREWASHER

1. Removeeverything from carton exceptpressure washer.

2. Opencarton completely bycutting eachcorner from top

to bottom.

3. Removepressure washer from carton.

CARTONCONTENTS

Checkall contents. If any parts are missing or damaged,call

the pressure washer helpline at 1-800-222-3136.

• Main Unit

• Handle

• AccessoryTray

• High PressureHose

• Spray Gun

• NozzleExtensionwith Quick ConnectFitting

• Oil Bottle

• HoseWrap

• Parts Bag (which includes the following):

• Operator's Manual

• Owner's Registration Card

• SafetyGoggles

• Bottle BracketWirdorm (2)

• PerfectMixTM Siphoning Unit/Hose

• DetergentSiphoning Hose/Filter

• Bagcontaining 5 PrecisionSprayTM Nozzles

• FreshStart FuelCartridge

• HandleFasteningHardwareKit (whichincludes):

• HandleBolts (2)

• CarriageBolt (2)

• Plastic Knobsfor Handle(2)

• RopeGuide (1)

• Plastic Knob (3)

• TreeClips (4)

Becomefamiliar with eachpiecebefore assemblingthe

pressure washer. Identify all contents with the illustration on

page 6. If any parts are missing or damaged,callthe

pressure washer helpline at 1-800-222-3136.

4. Add oil to engine crankcase.

5. Add fuelto fuel tank and FreshStart fuel cartridge to fuel

cap.

6. Connectpressure hoseto spray gun and pump.

7. Connectwater supply to pump.

8. Attach nozzleextension to spray gun.

9. Select/attachquick connect PrecisionSprayTM nozzleto

nozzleextension.

Attach Handle and Accessory Tray

1. Placehandle (A) onto handlesupports (B) connectedto

main unit. Make sure holes (C) in handlealign with holes

J i

2. Insert handle carriagebolts (D)through holes from

inside of unit and attacha plastic knob (E)from outside

of unit. Tighten by hand. Byloosening both knobs to the

middle section of the attachment bolt, the upper handle

can fold forward to store flat atop the cold engine.

NOTE:DONOTfold the handle down while the engine is hot.

Placeaccessorytray (F) over holes (6) on handle

(viewing from back of unit). Pushthe tree clips (N) into

the holes until they sit flat againstthe accessorytray.

ASSEMBLINGPRESSUREWASHER

Your Craftsmanpressure washer will need assembly before

operation:

1. Fill out and send in registration card.

2. Attachhandle,accessorytray, rope guide and hose wrap.

3. Connectdetergent siphon hoseto pump.

, L I I

Insert multi-colored PrecisionSprayTM nozzlesand other

supplied accessories in spaces provided in accessory

tray. SeeHow to UseAccessory Tray.

Attach rope guide (A) through handlewith plastic knob

(B). Tighten by hand. Routeengine recoil rope through

guide.

Align hosewrap (C)to the back side of accessorytray.

Locate notch with "unlock"icon (D) on hosewrap.

Position notch attop with hosewrap in vertical position.

Clips in the back of accessorytray should slide into the

grooves on the inside surface of hose wrap. Slide hose

wrap on back of accessorytray and rotate 1/8 turn until

"locked"icon (E) is in vertical position. Hosewrap is

easily removed from the accessorytray for wrapping and

unwrapping ofthe high pressure hose. A clip to secure

the hose on the reel makesit easyto wrap the hose

while it is detachedfrom the accessorytray.

-% \

Attach bottle brackets (F) to handle supports with

carriage bolt (G) and black plastic knob (H). Tighten by

hand.

2-1N-1 Soap System

Thepressure washer is equipped with two detergent

siphoning hoses.

Project ProPerfectMix Siphon

Bluetube with blue bottle cap:

When usingthe blue PerfectMix siphon, use

, the PerfectMixTM ExtremeConcentratestraight

i from the bottle

StandardSiphon Tube

Cleartube with filter:

When usingthe clear siphon tube, dilute

1 part PerfectMixTM ExtremeConcentrate

to 16 parts water (4 oz of concentrate

makes1/2 gallon of mix.)

Attach Project Pro@ PerfectMix TM Siphon to

Pump

Attach the hose end of the blue PerfectMWMSiphon (J) to

the barbed hosefitting (K) on the pump.

Attach PerfectMix TM Detergent Siphon to

Concentrate Bottle

PlacePerfectMixTM bottle (not included) in the wire-form

bracketon the handle. Removecap from bottle and insert the

PerfectMixTM Siphon (L). Screwthe siphon unit to the top of

the bottle (M). Usethe clip on the cap (L) to snapsiphon to

wire form bracketwhen siphon is not in a concentrate bottle.

Add Enoine Oil

1. Placepressure washer on a flat, ]eve]surface.

2. Cleanareaaround oil fill and removeyellow oil fill

cap/dipstick.

3. Using oil funnel (optional), slowly pour contents of

provided oil bottle into oil fill opening.

NOTICE

Improper treatment of pressure washer can damageit and

shorten its life.

DONOTattemptto crankor starttheenginebeforeit hasbeen

properlyservicedwiththerecommendedoil.Thismayresultin

anenginefailure.

4. Replaceoil fill cap/dipstick and fully tighten.

Add FueJ

Fuel must meet these requirements:

* Clean,fresh, unleadedgasoline.

. A minimum of 87 octane/87 AKI (91 RON).Highaltitude

use, see HighAltitude.

* Gasolinewith upto 10%ethanol (gasohol) or up to 15%

MTBE (methyltertiary butyl ether) is acceptable.

HOTJCE

Avoid pressure washer damage.

Failureto follow Operator's Manualfor fuel

recommendations voids warranty.

DONOTuseunapprovedgasolinesuchasE85.

DONOTmixoil in gasoline.

DONOTmodifyengineto runon alternatefuels.

Toprotectthe fuelsystemfrom gum formation, mix in a fuel

stabilizerwhenaddingfuel. SeeStorage.All fuel is notthe

same.If you experiencestarting or performanceproblemsafter

usingfuel, switch to a differentfuel provideror changebrands.

This engineis certifiedto operateon gasoline.Theemission

control systemfor this engineis EM(EngineModifications).

WARHJHG

f_ Fueland its vapors are extremely flammable and

explosive.

Fireor explosion can causesevere burns or

death.

WHEHADDINGFUEL

* TurnpressurewasherOFFandletit coolatleast2 minutes

beforeremovingfuelcap.Loosencapslowlyto relievepressure

in tank.

Fillfueltank outdoors.

DONOToverfilltank.Allowspacefor fuelexpansion.

. If fuelspills,waituntilit evaporatesbeforestartingengine.

* Keepfuelawayfromsparks,openflames,pilotlights,heat,and

otherignitionsources.

DONOTlighta cigaretteor smoke.

1. Cleanarea around fuel fill cap,remove cap.

2. Slowly add regular unleadedfuel (A) to fuel tank (U). Be

careful notto overfill. Allow about 1.5" (4 cm) (C) of tank

spacefor fuel expansion.

3. Installfuel capand wait for any spilled fuel to evaporate.

CAUTION!Alcohol-blended fuels (calledgasohol,ethanol or

methanol) can attract moisture, which leadsto separationand

formation of acids during storage.Acidic gascan damagethe

fuel system of an enginewhile in storage.

To avoid engine problems, the fuel systemshould be treated

with a fuel preserver or emptied beforestorage of 30 days or

longer. If adding a fuel preserver,fill the fuel tank with fresh

fuel. if only partially filled, air in the tank will promote fuel

deterioration during storage, if fuel preserver is not used,

drain the fuel tank, start the engineand let it run until the fuel

linesand carburetor are empty. Usefresh fuel next season.

SeeStoragefor additional information.

NEVERuse engine or carburetor cleaner products in the fuel

tank as permanent damagemay occur.

FreshStart FuelCap

Adding fuel preserver helps keepfuel fresh and carburetors

clean for easier starting, all season long. This new fuel cap

automatically drips concentrated fuel preserver into your fuel

tank.

, DANGER

Contentsare harmful or fatal if swallowed. Avoid

_ ontactto eyes,skin or clothing. DONOTtake

internally.Avoid breathingthe mist or vapor.

Overexposureto eyesor skin can causeirritation.

Keepstabilizer out of the reachof children.

Fuelstabilizer is a hazardouschemical.**

o If SWALLOWED,callphysicianimmediately.

o Inthecaseof anemergency,contactaphysicianimmediately

andcall1-800-424-9380for materialsafetyinformation.

**Fuel stabilizer contains: 2,6-di-tret-butylphenol (128-39-2) and alipbatie petroleum

distillate (64742-47-8).

Placecartridge into fuel cap.

Pushto "snap" cartridge into place.

Removetab to expose membrane.

IMPORTANT:DONOTremovethe silver foil sealon the

opposite side.

4. Reinstallfuel cap on fueltank.

5. Periodically checkthe cartridge to ensurethere is still

fuel stabilizer inside. If it is empty, removecartridge and

replace.

HighAltitude

Ataltitudesover5,000feet (1524meters),a minimum85 octane

/ 85 AKI(89RON)gasolineis acceptable.Toremainemissions

compliant,high altitudeadjustmentis required.Operationwithout

this adjustmentwill causedecreasedperformance,increasedfuel

consumption,andincreasedemissions.Seea qualifiedSears

dealerfor highaltitudeadjustmentinformation.Operationofthe

engineataltitudesbelow2,500feet(762 meters)with thehigh

altitudekit isnot recommended.

Connect Hose and Water Supply to Pump

NOTE:Removeand discardthe shippingcaps from the pump's

high pressureoutlet andwater inlet beforeattachinghoses.

NOTICE

DONOTrun the pump without the water supply connected

and turned on.

Damageto equipmentresultingfrom failuretofollowthis

instructionwillvoidwarranty.

Uncoil high pressure hoseand attach one end of hoseto

baseof spray gun. Tighten by hand.

WARHIHG

The high pressure stream of water that this

_ quipment produces cancut through skin and its

underlyingtissues, leadingto serious injury and

_ossibleamputation.

* NEVERconnecthighpressurehoseto spraytip extension.

* Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

* Alwaysbecertainspraygun,spraytips andaccessoriesare

correctlyattached.

2. Attach other end of high pressure hoseto high pressure

outlet on pump. Tighten by hand.

Beforeconnectinggarden hoseto water inlet, inspect

inlet screen (A). Cleanscreen if it contains debris or have

it replacedif damaged.DONOTrunpressurewasher if

inlet screenis damagedor missing.

4. Runwater through garden hosefor 30 secondsto flush

it of debris. Turn off water.

IMPORTANT:DONOTsiphon standing water for the water

supply. Use ONLYcold water (less than I O0°F).

HOTICE

Using a OneWay Valve(vacuum breakeror checkvalve) at

pump inlet cancause pump or inlet connector damage.

ThereMUSTbeatleasttenfeetof unrestrictedgardenhose

betweenthepressurewasherinletandanydevice,suchasa

vacuumbreakeror checkvalve.

Damageto equipmentresultingfrom failureto followthis

instructionwillvoidwarranty.

5. Connectgarden hose (notto exceed50 feet in length) to

water inlet. Tighten by hand.

WARHIHG

,_ Riskof eyeinjury.

_Spray cansplash back or propel objects.

Alwayswearsafetygoggleswhenusingthis equipmentor in

vicinityof whereequipmentisin use.

Beforestartingthepressurewasher,besureyouarewearing

adequatesafetygoggles.

NEVERsubstitutesafetyglassesfor safetygoggles.

6. Turn ONthe water, press red button (B) on the gun and

squeezethe trigger to purge the pump system of air and

impurities.

Checklist Before Starting Engine

Reviewthe unit to ensureyou have performedall of the

following:

1. Besure to read SafetyRulesand Operationsections

before usingthe pressure washer.

2. Makesure handle is in placeand secure.

3. Checkthat oil has beenadded to proper levelin engine

crankcase.

4. Add proper fuelto fuel tank.

5. Checkfor proper hoseconnections (high pressure and

water supply) and that there are no kinks, cuts, or

damageto the high pressure hose.

6. Provideproper water supply (not to exceedIO0°F).

HOWTOUSEYOURPRESSUREWASHER

If you haveany problems operatingyour pressure washer,

pleasecallthe pressure washer helpline at 1-808-222-3136.

Pressure Washer Location

PressureWasherClearance

WARNING

_ Exhaustheat/gases can ignitecombustibles,

structures or damagefuel tankcausing a fire.

• Keepatleast5ft. (152cm)clearanceonall sidesofpressure

washerincludingoverhead.

Placepressure washer outdoors in an areathat will not

accumulate deadlyexhaustgas. DONOTplacepressure

washer where exhaustgas (A)could accumulateand enter

inside or be drawn into a potentially occupied building.

Ensureexhaustgas is kept awayfrom any windows, doors,

ventilation intakes, or other openingsthat can allow exhaust

gasto collect in a confined area. Prevailingwinds and air

currents should be taken into considerationwhen positioning

_ressurewasher.

WARHIHG

Runningengine gives off carbon monoxide, an

_ dorless, colorless, poison gas.

Breathingcarbon monoxide can causeheadache,

fatigue, dizziness,vomiting, confusion, seizures,

nausea,fainting or death.

. OperatepressurewasherONLYoutdoors.

• Keepexhaustgasfromenteringaconfinedareathrough

windows,doors,ventilationintakes,or otheropenings.

• DONOTstartor runengineindoorsor in anenclosedarea,

evenif windowsanddoorsareopen.

To Start Your Pressure Washer

To start your engine-powered pressurewasher for the first

time, follow these instructions step-by-step. This information

also applies wheneveryou start the engine after you havelet

the pressure washer sit idle for at least a day.

1. Placepressure washer outside near an water source

capableof supplying water at a flow rategreater than

3.7 gallons per minute and no less than 20 PSIat

pressurewasher end of garden hose.

2. Checkthat high pressure hose istightly connectedto

spray gun and pump. SeeAssemblyfor illustrations.

3. Makesure unit is in a levelposition.

4. Connectgarden hoseto water inlet on pressure washer

pump.

[ NOTICE

pO NOT the without the connected

run

pump

water

supply

and turned on.

L amageto equipmentresultingfrom failureto followthis

instructionwillvoidwarranty.

5. Turn ONthe water,press red button on the gun and

squeezethe trigger to purge the pump system of air and

impurities.

6. Attach nozzleextension to spray gun. Tighten by hand.

ChoosePrecisionSprayTM nozzleyou want to use, pull

back on collar of nozzleextension, insert nozzleand

releasecollar. Tug on nozzleto makesure it is securely in

place.SeeHow to Use PrecisionSpraSMNozzleSystem.

8. Movethrottle lever (B) to "Fast" position, shown hereas

a rabbit.

9. Move choke lever (C)to "Choke" position.

NOTE:Forawarm engine,be sure the choke leveris inthe

"Run" position.

IMPORTANT:Beforestartingthepressurewasher,besure

¢ouare wearing adequatesafety goggles.

WARNING

Riskof eyeinjury.

_Spray cansplash back or propel objects.

Alwayswearsafetygoggleswhenusingthis equipmentor in

vicinityof whereequipmentisin use.

Beforestartingthepressurewasher,besureyouarewearing

adequatesafetygoggles.

NEVERsubstitutesafetyglassesfor safetygoggles.

10. Whenstarting engine, position yourself as

recommendedand grasp starter grip handle and pull

slowly until you feelsome resistance.Thenpull rapidly

to start engine.

WARNING

Startercord kickback(rapid retraction) can result

in bodily injury. Kickbackwill pull handand arm

_!_.< toward enginefaster than youcan let go.

Brokenbones, fractures, bruises, or sprains

could result.

* NEVERpull startercordwithoutfirst relievingspraygun

pressure.

* Whenstartingengine,pullcordslowlyuntilresistanceisfelt

andthenpull rapidlyto avoidkickback.

* Aftereachstartingattempt,whereenginefailsto run,always

pointspraygunin safedirection,pressredbuttonandsqueeze

sprayguntriggerto releasehighpressure.

Firmlygraspspraygunwith bothhandswhenusinghigh

pressuresprayto avoidinjurywhenspraygunkicksback.

11. Return recoil starter slowly. DONOTlet rope "snap

back"against starter.

12. When engine starts, slowly movechoke leverto "Run"

position, as engine warms. If engine falters, move choke

leverto "Choke" position, then to "Run" position.

13. After eachstarting attempt, where enginefails to run,

always point gun in safe direction, press red button and

squeezespray gun trigger to releasehigh pressure.

Move choke leverto "Cheke" position, and repeatsteps

10 through 12.

14. If enginefails to start after six pulls, movechoke leverto

"Run" position, and repeatsteps 10 through 12.

NOTE:Always keepthe throttle lever in the "Fast" position

when operatingthe pressure washer.

WARNING

Thehigh pressurestream of water that this

equipment produces cancut through skin and its

_ nderlying tissues, leadingto serious injury and

_ossibleamputation.

Spray gun traps high water pressure,evenwhen

engine is stopped and water is disconnected,

which can cause injury.

• DONOTallowCHILDRENtooperatepressurewasher.

• Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

, NEVERaimspraygunatpeople,animals,or plants.

• DONOTsecurespraygun inopenposition.

• DONOTleavespraygununattendedwhilemachineis running.

, NEVERusea spraygunwhichdoesnothaveatriggerlockor

triggerguardin placeandin workingorder.

, Alwaysbecertainspraygun,spraytipsandaccessoriesare

correctlyattached.

WARNING

_ ontact with muffler area can result in serious

burns.

_ Exhaustheat/gases can ignite combustibles,

structures or damagefuel tankcausing a fire.

* DONOTtouchhotpartsandAVOIDhotexhaustgases.

, Allowequipmenttocoolbeforetouching.

* Keepatleast5 feet(152cm) ofclearanceonall sidesof

pressurewasherincludingoverhead.

, Codeof FederalRegulation(CFR)Title36Parks,Forests,and

PublicPropertyrequireequipmentpoweredbyaninternal

combustionengineto haveasparkarrester,maintainedin

effectiveworkingorder,complyingto USDAForestservice

standard51B0-1Cor laterrevision.IntheStateof Californiaa

sparkarresterisrequiredundersection4442oftheCalifornia

Publicresourcescode.Otherstatesmayhavesimilarlaws.

How to Stop Your Pressure Washer

1. Releasespray gun trigger and letengine idle for two

minutes.

2. Movethrottle to SLOWposition,then STOPposition.

WARHIHG

.,i_j Backfire,fire or engine damagecould occur.

* DONOTstopenginebymovingchokeleverto "Cheke"position.

3. ALWAYSpoint spray gun in a safe direction, push red

button and squeezespray gun trigger to releaseretained

high water pressure.

IMPORTANT:Sprayguntraps high water pressure,even

when engine is stopped and water is disconnected.

WARNING

The high pressure stream of water that this

equipment produces cancut through skin and its

,_ underlyingtissues, leadingto serious injury and

_ossibleamputation.

Spray gun traps high water pressure,evenwhen

engine is stopped and water is disconnected,

which can cause injury.

. Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

• ALWAYSpointspraygunin safedirection,pressredbutton

andsqueezesprayguntrigger,to releasehighpressure,every

time youstopengine.

Howto UseAccessoryTray

The unit is equipped with an accessorytray with placesto

store your spray gun, nozzleextensionand quick connect

PrecisionSprayTM nozzles.Thereis also adetachablehose

wrap at the back of the accessorytray to hold your high

pressure hose.

1. Placespraytip extensionin clip on back ofaccessorytray.

Placespray gun through hole on accessorytray on right

side of unit.

3. Insert multi-colored spraytips in spacesprovided in

accessorytray.

4. Wrap high pressure hose on hose wrap then attach hose

wrap to back of accessorytray.

5. Hook provided on back of accessorytray for safely

storing safety goggles.

How to Use PrecisionSprayTM Nozzle System

Thequick-connect on the nozzleextensionallows you to

switch between five different PrecisionSprayTM system

nozzles. PrecisionSprayTM nozzlescan be changedwhile

pressure washer is running oncespray gun trigger lockis

engaged.

WARHING

Thehigh pressurestream of water that this

_ quipment produces cancut through skin and its

underlyingtissues, leadingto serious injury and

)ossible amputation.

. NEVERexchangePrecisionSprayTM nozzleswithoutthetrigger

lockbeingengagedonthespraygun.

• DONOTtwist PrecisionSprayTM nozzleswhilespraying.

FolJowthese instructionsto changePrecisionSprayTM

flozzJes:

1. Pull backcollar on quick-connect and pull current

PrecisionSprayTM nozzleoff. Store PrecisionSprayTM

nozzlesin holder provided on the accessorytray.

2. Select desired PrecisionSprayTM nozzle:

* Selectorange general PrecisionSprayTM nozzlefor all

purpose cleaning. Cleansvinyl siding, brick patios,

concrete driveways and other surfaces.

Selectred max PrecisionSprayTM nozzlefor maximum

cleaning.Greatfor cleaningstubbornstains, including

grease,tar, wax,andotherhardto removestains.

MAX

• SelectcyanjetflushPrecisionSprayTM nozzlefor

quick high flow clean up and long reachcleaningof

second story siding and windows.

• Select magentajet soap PrecisionSprayTM nozzleto

launch soapto second story siding and windows.

Select black fan soap PrecisionSprayTM nozzlefor

generalcleaning. Greatfor applying soapto

vehicles, boats, driveways, decks,and patios.

FAN SOAP

3. Pull backon collar,insert newPrecisionSprayTM nozzle

and releasecollar.Tug on nozzleto makesureit is securely

in place.

UsageTips

* Formost effective cleaning, keepPrecisionSprayTM nozzle

from 8 to 24 inches (20 to 61 cm) awayfrom cleaning

surface.

. If you get PrecisionSprayTM nozzletoo close, especially

usinga high pressure nozzle,you may damagesurface

being cleaned.

* DONOTget closer than 6 inches (15 cm) when cleaning

tires.

2-1N-1 Soap System

CAUTIOH

Chemicalscan cause bodily injury, and/or property

damage.

NEVERusecausticliquidwith pressurewasher.

UseONLYpressurewashersafedetergents/soaps.Followall

manufacturersinstructions.

CJeaningand ApplyingDetergent with the Project Pro@

PerfectMJxTM Siphon

To apply undiluted detergent usingthe

blue PeffectMixTM siphon, follow these

steps:

1. Reviewuseof PrecisionSprayTM i

nozzles.

2. Attach PerfectMWMsiphon hoseto

pump and PerfectMixTM concentrate ii'i"

bottle, ti

NOTICE

Contact with the hot muffler can damagedetergent

siphoning tube.

Wheninsertingthesiphonintoa detergentsolutionbottle,

routethetubesoasto keepit from inadvertentlycontactingthe

hotmuffler.

3. Makesure fan soap (black) or jet soap nozzle(magenta)

is installed.

NOTE:Detergentcannot be applied with the high pressure

nozzles(Cyan,Orangeor Red).

4. Makesure garden hose is connectedto water inlet.

Checkthat high pressure hose is connectedto spray gun

and pump. Turn on water.

NOTICE

You must attachall hosesbefore you start th_

Startingtheenginewithoutallthehosesconnectedandwithout

thewaterturnedONwill damagethepump.

Damageto equipmentresultingfrom failureto followthis

instructionwillvoidwarranty.

5. Start engine following instructions How to Start Your

Pressure Washer.

6. Apply detergentto a dry surface, starting at lower

portion of areato be washed and work upward, using

long, even, overlappingstrokes.

7. Allow detergentto "soak in" for 3-5 minutes before

washing and rinsing. Reapplyas neededto prevent

surface from drying. DONOTallow detergentto dry on

(preventsstreaking).

CJeaningand ApplyingDetergent with the StandardClear

Siphon

To apply diluted detergent using the

standard clear siphon tube, follow these

steps:

1. Reviewuse of PrecisionSprayTM

nozzles.

2. Attachclear siphon hoseto barbed

fitting on pump.

3. Mix detergent solution as required byjob.

4. Placesmall filter end of clearsiphoning tube into

container with diluted solution as described above.

NOTE:DONOTinsert standard siphon hose in Extreme

Concentrate.Failureto dilute concentratewill causeexcessive

application and consumption of solution.

NOTE:Makesure the filter is fully submerged in fluid while

applying solution.

NOTICE

Contact with the hot muffler can damagedetergent

siphoning tube.

Wheninsertingthesiphonintoa detergentsolutionbottle,

routethetubesoasto keepitfrom inadvertentlycontactingthe

hotmuffler.

5. Make sure fan soap (black) or jet soap nozzle (magenta)

is installed.

NOTE:Detergentcannot be applied with the high pressure

nozzles(Cyan,Orangeor Red).

6. Make sure garden hoseis connectedto water inlet.

Checkthat high pressure hose is connectedto spray gun

and pump. Turn on water.

NOTICE

You must attachall hoses beforeyou start the engine.

Startingtheenginewithoutallthehosesconnectedandwithout

thewaterturnedONwill damagethepump.

Damageto equipmentresultingfrom failuretofollowthis

instructionwillvoidwarranty.

7. Start engine following instructions How to Start Your

Pressure Washer.

8. Apply detergentto a dry surface, starting at lower

portion of area to be washedand work upward, using

long, even, overlapping strokes.

9. Allow detergentto %oakin" for 3-5 minutes before

washing and rinsing. Reapplyas neededto prevent

surfacefrom drying. DONOTallow detergentto dry on

(prevents streaking).

IMPORTANT:You must flush the detergent siphoning system

after each useby placing the filter into a bucket of clean

water,then run the pressure washer in low pressure for 1-2

minutes.

Pressure Washer Rinsing

ForRinsing:

1. Removelowpressure nozzlefrom nozzleextension.

2. Selectand installdesiredhighpressure nozzlefollowing

instructions How to UsePrecisionSpraSMNozzleSystem.

3. Keepspray gun a safe distancefrom areayou plan to

spray.

spray gun cancauseyou

Kickbackfrom to fall.

• Operatepressurewasherfrom astablesurface.

, Beextremelycarefulifyou mustusethepressurewasherfrom

a ladder,scaffolding,or anyothersimilarlocation.

, Firmlygraspspraygunwith bothhandswhenusinghigh

pressuresprayto avoidinjurywhenspraygunkicksback.

Apply a high pressure spray to a small areaand then

check surface for damage.If no damageis found, you

can assume it is okayto continue rinsing.

Start at top of areato be rinsed, working down with

same overlapping strokes asyou usedfor cleaning.

Cleaning DetergentSiphoning Tube

If you usedthe clear detergentsiphoning tube, you must

flush it with cleanwater beforestopping the engine.

1. Placedetergent siphoning tube/filter in a bucketfull of

clean water.

2. Removehigh pressure nozzlefrom nozzleextension.

3. Selectand install a soap nozzlefollowing instructions

How to Use PrecisionSprayTM NozzleSystem.

4. Flushfor 1-2 minutes.

5. Shut off engine following instructions How to Stop

Pressure Washerand turn off water supply.

6. ALWAYSpoint spray gun in a safe direction push red

button and squeezespray gun trigger to releaseretained

high water pressure.

iMPORTANT:Spraygun traps high water pressure,even

when engine is stopped and water is disconnected.

Automatic Cool Down System (Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressingthe trigger on the spray gun,

circulating water in the pump can reachtemperatures above

125°F.Thesystem engagesto cool the pump by discharging

the warmwater ontothe ground.

EHGJNETECHNICALJNFORMATJOH PRODUCTSPECJFICATJOHS

This is a single cylinder, overheadvalve (OHV),air cooled

engine, it is a low emissions engine.

Inthe Stateof California, Model 120000 enginesare certified

by the California Air Resources Boardto meet emissions

standardsfor 125 hours. Such certification does not grant

the purchaser, owner or operator of this engine any

additional warranties with respectto the performance or

operational life of this engine.Theengine is warranted solely

according to the product and emissions warranties stated

elsewherein this manual.

Power Ratings

Thegross power rating for individual gas engine models is

labeledin accordancewith SAE(Societyof Automotive

Engineers)codeJ1940 (Small Engine Power & Torque

Rating Procedure),and rating performance hasbeen

obtained andcorrected in accordancewith SAEJ1995

(Revision2002-05). Torquevalues are derived at3060 RPM;

horsepower values are derivedat 3600 RPM.Actual gross

engine power will be lower and is affected by, among other

things, ambient operating conditions and engine-to-engine

variability. Givenboth the wide array of products on which

enginesare placedand the variety of environmental issues

applicableto operatingthe equipment, the gas engine will not

developthe ratedgross power when used in a given pieceof

power equipment (actual "on-site"or net power). This

difference is due to a variety of factors including, but not

limited to, accessories (air cleaner, exhaust,charging,

cooling, carburetor, fuel pump, etc.), application limitations,

ambient operating conditions (temperature,humidity,

altitude), and engine-to-engine variability. Dueto

manufacturing and capacity limitations, Briggs & Stratton

maysubstitute an engine of higher ratedpower for this

Seriesengine.

This pressurewasher is rated in accordanceto the Pressure

Washer Manufacture Association (PWMA) standard PW101

(Testingand Rating Performanceof PressureWashers).

Pressure Washer Specifications

Max Outlet Pressure ....................... 3,000 PSi

Max How Rate............................. 2.7 GPM

DetergentMix ........................ Use asdirected

Water SupplyTemperature .......... Not to exceed IO0°F

Shipping Weight ............................. 71 Ibs.

Engine Specifications

Bore ................................. 2.69 in. (68mm)

Stroke ............................... 2.04 in. (52mm)

Displacement ........................ 11.57in. (190 cc)

SparkPlug

Type:..................... Briggs & Stratton 491055S

SetGapTo: ...................... O.020inch(0.50ram)

ArmatureAir Gap: ........... 0.006-0.014in.(O.15-O.36mm)

Valveclearancewithvalvespringsinstalledandpiston1/4in.

(6 ram)pasttopdeadcenter(checkwhenengineiscold).

Intake.................... 0.004-0.006in.(0.10-0.15mm)

Exhaust .................. 0.004-0.008in.(0.10-0.20mm)

FuelCapacity............................... 1.6Quarts

OilCapacity....................... 22 Ounces(0.65liter)

NOTE:Forpractical operation,the engine load should not

exceed 85% of rated power. Enginepower will decrease

3-1/2% for each1,000 feet (300 meters) abovesea leveland

1% for each 10° F(5.6° C) above77° F(25° C). It should

operatesatisfactorily at an angle up to 15°.

OWHER'SRESPOHSIBILITIES

Followthe hourly or calendarintervals, whichever occurs

first. More frequentservice is required when operating in

adverseconditions noted below.

Pump Oil

DONOTattempt any oil maintenanceonthis pump. The

pump is pre-lubricated and sealedfrom the factory, requiring

no additional maintenancefor the life of the pump.

Maintenance Schedule

* Changeengine oil

* Check/clean water inlet screen1

, Checkhigh pressure hose

, Checkdetergentsiphoning hose

, Checkspray gun and assembly for leaks

* Cleandebris

* Checkengine oil level

, Service engineair cleaner2

, Changeengine oil2

* Service spark arrester

, Service spark plug

, Cleancooling system2

Clean if clogged. Replace if perforated or torn.

Service more often under dirty or dusty conditions.

General Recommendations

Regularmaintenancewill improve the performanceand

extendthe life of the pressure washer. Seeany Searsor

other qualified service dealerfor service.

Thepressure washer warranty doesnot cover items that

havebeen subjectedto operator abuseor negligence.To

receivefull valuefrom the warranty, the operator must

maintain pressure washer as instructed in this manual

including proper storage as detailedin Storage.

Someadjustments will needto be madeperiodically to

properly maintain your pressure washer.

All serviceand adjustments should be madeat least once

eachseason.Follow the requirementsin the Maintenance

Schedulechart above.

NOTE:Oncea year you should clean or replacethe spark

plug and replacethe air filter. A new spark plug and clean air

filter assure proper fuel-air mixture and help your engine run

better and last longer.

EmissionsControl

Maintenance, replacement, or repair of the emissions

control devices andsystemsmay be performedby any non-

roadenginerepair establishmentor individual. However,

to obtain "no charge" emissions control service, the work

must be performed by a factory authorized dealer.Seethe

Emissions Warranty.

Before Each Use

1. Checkengine oil level.

2. Cleandebris.

3. Checkwater inlet screen for damage.

4. Checkhigh pressure hose for leaks.

5. Checkgun and nozzleextension assembly for leaks.

6. Purge pump of air and contaminants.

PRESSUREWASHERMAINTENANCE

Clean Debris

Daily or before use,clean accumulated debris from pressure

washer. Keeplinkage, spring and controls clean. Keeparea

around and behind muffler free from any combustible debris.

Inspect cooling air slots and openings on the pressure

washer. Theseopenings must be kept cleanand

unobstructed.

Pressurewasher parts should be kept cleanto reducethe

risk of overheating and ignition of accumulated debris.

* Usea dampcloth to wipe exterior surfaces clean.

[ NOTICE

Improper treatment of pressure washer can damageit and

|shorten ts fe.

L DONOTinsertanyobjectsthroughcoolingslots.

• Usea soft bristle brush to loosencaked on dirt, oil, etc.

• Usea vacuumcleanerto pick up loose dirt and debris.

Check and Clean Inlet Screen

Examinegarden hoseinlet screen. Cleanif it is clogged or

replaceif it is torn.

Check High Pressure Hose

High pressure hoses can developleaks from wear, kinking,

or abuse. Inspect hose beforeeach use. Checkfor cuts,

leaks,abrasions, bulging of cover, or damageor movement

of couplings. If any of these conditions exist, replacehose

immediately.

WARHIHG

The high pressure stream of water that this

_ quipment produces cancut through skin and its

underlyingtissues, leadingto serious injury and

_ossibleamputation.

* NEVERrepairhighpressurehose.Replaceit.

* ReplacementhoseratingMUSTexceedmaximumpressure

ratingof unit.

Check Gunand Hozzle Extension

Examinehoseconnectionto spraygun and makesureit is

secure.Testtrigger bypressingit and makingsureit springs

backinto placewhenyou releaseit. Donotdepressred button

andtesttrigger.Youshouldnot beableto presstrigger. Replace

spraygun immediatelyif it failsanyofthesetests.

HozzleMaintenance

A pulsing sensationfelt while squeezingthe spray gun trigger

may becaused by excessivepump pressure. Theprincipal

cause of excessivepump pressureis a nozzleclogged or

restricted with foreign materials, such asdirt, etc. Tocorrect

the problem, immediately cleanthe nozzlefollowing these

instructions:

1. Shut off engine and turn off water supply.

2. ALWAYSpoint spray gun in a safe direction, press red

button and and squeezespray gun trigger to release

retainedhigh water pressure.

WARHIHG

Thehigh pressure stream of water that this

equipment produces cancut through skin and its

_ nderlying tissues, leading to serious injury and

possible amputation.

Spraygun traps high water pressure, evenwhen

engine is stopped and water is disconnected,

which cancause injury.

* Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

* ALWAYSpointspraygunin safedirection,pressredbutton

andsqueezesprayguntrigger,to releasehighpressure,every

time youstopengine.

3. Removenozzlefrom end of nozzleextension.

4. Usea small paperclip to free any foreign material

clogging or restricting nozzle (A).

Removenozzleextension from spray gun.

Using a garden hose, removeadditional debris by back

flushing waterthrough nozzleextension. Backflush

between30 to 60 seconds.

7. Reinstallnozzleinto nozzleextension.

8. Reconnectnozzleextensionto spray gun.

9. Makesure garden hose is connectedto water inlet.

Checkthat high pressure hose is connectedto spray gun

and pump. Turn on water.

10. Start engine following instructions How to Start Your

Pressure Washer.

11. Test pressure washer by operating with eachquick

connect nozzle.

O-Ring Maintenance

Purchasean O-Ring RepairKit atyour local Searsor by

calling 1-800-4-NIY-HOIVlE(469-4663) or online at

www.sears.com. It is not included with the pressure washer.

This kit includes replacemento-rings, rubber washer and

water inlet filter. Referto the instruction sheet provided in the

kit to serviceyour unit's o-rings.

WARHIHG

Thehigh pressurestream of water that this

,p_ equipment produces cancut through skin and its

underlyingtissues, leadingto serious injury and

)ossible amputation.

* NEVERrepairleakingconnectionswithsealantof anykind.

Replaceo-ringor seal.

ENGINEMAINTENANCE

WARHIHG

_-,_J_ Unintentionalsparking can result in fire or

_¢ electric shock.

WHENADJUSTINGORMAKINGREPAIRSTOYOUR

PRESSUREWASHER

* Disconnectthesparkplugwirefromthesparkplugandplace

thewirewhereit cannotcontactsparkplug.

WHENTESTINGFORENGINESPARK

* Useapprovedsparkplugtester.

* DONOTcheckfor sparkwith sparkplugremoved.

Oil

OIl Recommendations

We recommendthe useof Briggs & Stratton Warranty

Certified oils for best performance. Otherhigh-quality

detergent oils are acceptableif classified for service SF,SG,

SH, SJ or higher. DONOTusespecialadditives.

Outdoortemperatures determine the proper oil viscosity for

the engine. Usethe chart to selectthe bestviscosity for the

outdoor temperature rangeexpected.

104 Z__ ,_

86 _

eoi

5o _

32 _

-4

-22

%_, 40

_1-- 30

__20

_'m _0

l-r =-10

* Below40°F(4°0)theuseofSAE30 will resultin hardstarting.

** Above80°F(27°0)theuseof 10W30maycauseincreasedoil

consumption.Checkoil levelmorefrequently.

NOTE:Synthetic oil meeting ILSACGF-2,API

certification mark and API servicesymbol with

"SJ/CF ENERGYCONSERVING"or higher, is an

acceptableoil at all temperatures. Useof synthetic oil

doesnot alter required oil change intervals.

Checkingoil level

Oil levelshould becheckedprior to each useor at least every

8 hours of operation. Keepoil level maintained.

1. Makesure pressure washer is on a levelsurface.

2. Removeoil dipstick and wipe dipstick with cleancloth.

Replaceand tighten dipstick. Removeand and check oil

level.

3. Verify oil is at "Full" mark on dipstick. Replaceand

tighten dipstick.

AddingEngineOil

Makesure pressure washer is on a levelsurface.

Checkoil level as described in CheckingOilLevel

If needed,slowly pour oil into oil fill openingto the

"Full" mark on dipstick. DONOToverfill.

NOTICE

Overfilling with oil may causethe engineto not start, or

hard starting.

DONOToverfill.

IfovertheFULLmarkon dipstick,drainoil to reduceoil levelto

FULLmarkon dipstick.

4. Replaceand tighten dipstick.

ChangingEngineOil

Changeengine oil after the first 5 hours and every 50 hours

thereafter. If you are usingyour pressure washer under

extremely dirty or dusty conditions, or in extremely hot

weather,change oil more often.

CAUTION

Avoid prolonged or repeatedskin contact with usedmotor

oil.

Usedmotoroil hasbeenshownto causeskincancerin certain

laboratoryanimals.

Thoroughlywashexposedareaswith soapandwater.

KEEPOUTOFREACHOFCHILDREN.DON'T

POLLUTE.CONSERVERESOURCES.RETURN

USEDOILTOCOLLECTIONCENTERS.

Changeoff while engine is still warmfrom running,as

follows:

1. Drain fueltank by running pressure washer until fuel

tank is empty.

2. Disconnectspark plug wire and keepit away from spark

plug.

3. Cleanarea around oil fill, remove oil fill cap/dipstick.

Wipe dipstick clean.

4. Tipyour pressure washer to drain oil from oil fill into a

suitable container making sure you tip your unit away

from spark plug. When crankcaseis empty, return

pressure washer to upright position.

5. Slowly pour recommended oil (about 20 oz.) into oil fill

opening. Pauseto permit oil to settle. Fillto "Full" mark

on dipstick.

6. Wipe dipstick cleaneachtime oil levelis checked.DO

NOToverfill.

7. Replaceand tighten dipstick.

8. Wipe up any remaining oil.

9. Reconnectspark plug wire to spark plug.

Service Air Cleaner

Your enginewill not run properly and may be damagedif you

run it with a dirty air cleaner.

Servicethe air cleaneronce every25 hours of operation or

once eachyear, whichever comes first. Service more often if

operating under dirty or dusty conditions. Replacementsare

availableatyour local Searsservicecenter.

Toservicetheair cleaner,fellow thesesteps:

1. Loosentwo screws (A) and lift off cover (B).

2. Carefullyremove air cleaner (C)from base (D).

3. Install clean (or new) air cleanerin base.Air cleaner

must fit securelyin base.

4. Placecover over air cleanerand tighten screws.

NOTE:You canpurchase new air filter elements bycalling

1-800-4-MY-HOIViE(469-4663).

Service Spark Plug

Servicethe spark plug every 100 hours of operation or

yearly, whichever occurs first.

1. Cleanareaaround spark plug.

2. Removeand inspect spark plug.

3. Replacespark plug if electrodesare pitted, burned or

porcelainis cracked. Usethe recommended replacement

plug. See Specifications.

4. Checkelectrode gap with wire feelergaugeand set spark

plug gap to 0.020 inch (0.50 mm) if necessary.

5. install spark plug and tighten firmly.

NOTE:You canpurchase a new spark plug bycalling

1-OOO-44VlY-HOME(469-4663).

SparkArresterService

Your engine is not factory-equipped with a spark arrester, in

some areas,it is illegal to operatean engine without a spark

arrester. Checklocal laws and regulations. A spark arrester is

availablefrom your nearest Searsservicecenter. If you need

to order a spark arrester, pleasecall 1-800-4-MY-HOME

(469-4663).

Thespark arrester must be serviced every50 hours to keepit

functioning asdesigned.

Page is loading ...

Craftsman 580.752210 User manual

Brand: Craftsman

Model: 580.752210

Category: High-pressure cleaners

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

español: Craftsman 580.752210 Manual de usuario

Craftsman 580.752210 User manual

This manual is also suitable for

Craftsman 580.752210 User manual

in other languages

Related papers

Other documents