Fellowes PROTEUS A3/125 Datasheet

Brand: Fellowes

Model: PROTEUS A3/125

Category: Laminators

Type: Datasheet

fellowes.com

1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600

Australia China France Korea Singapore

Benelux Deutschland Italia Polska United Kingdom

Canada España Japan Russia United States

Heavy Duty Laminator

Please read these instructions before use.

Veuillez lire ces instructions avant l’utilisation.

Lea estas instrucciones antes del usarlo.

Page is loading ...

CAPABILITIES

-Themachineisforindooruseonly.Plugthemachineintoaneasilyaccessiblesocket.

-Topreventelectricalshock-donotusetheapplianceclosetowater,donotspillwaterontotheappliance,powercordorwallsocket.

DOensurethemachineisonastablesurface.

DOtestlaminatescrapsheetsandsetthemachinebeforefinallaminations.

DOremovestaplesandothermetalarticlespriortolaminating.

DOkeepthemachineawayfromheatandwatersources.

DOturnoffthemachineaftereachuse.

DOunplugthemachinewhennotinuseforanextendedperiod.

DOusepouchesdesignedforuseattheappropriatesettings.

DOkeepawayfrompets,whileinuse.

DOensureself-adhesivepouchesareonlyusedwiththecoldsetting.

DO NOTleavethepowercordincontactwithhotsurfaces.

DO NOTleavepowercordhangingfromcupboardsorshelves.

DO NOTuseapplianceifthepowercordisdamaged.

DO NOTattempttoopenorotherwiserepairthemachine.

DO NOTexceedthemachinesquotedperformance.

DO NOTallowchildrentousethismachinewithoutadultsupervision.

DO NOTlaminatesharpormetalobjects(eg:staples,paperclips).

DO NOTlaminateheat-sensitivedocuments(eg:tickets,ultrasoundsetc)on

hotsettings.

DO NOTlaminatewithself-adhesivepouchesonhotsettings.

DO NO

Tlaminateanemptypouch.

IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE

• Alwaysputitemintotheappropriatesizedpouch.

• Alwaystestlaminatewithasimilarsizeandthicknessbeforefinal

process.

• Ifrequired,trimexcessmaterialfromaroundtheitemafterlamina-

tionandcooling.

• Forbestresults,useFellowes®brandpouches:

3Mil,5Mil,7Mil,10Mil(5Mil-coldpouch)

• Whenworkingwithdifferentpouchthickness’(temperaturesettings)it

isrecommendedtostartfirstwiththethinnestpouches.

• Preparepouchanditemforlamination.Placeitemwithinpouch

centeredandtouchingtheleadingsealededge.Ensurethepouchis

nottoolargefortheitem.

FEATURES & TIPS

Performance Technical Data

Entrywidth 12.5” Voltage/Frequency/Current(Amps) 120VAC,60Hz,5A

Pouchthickness(min) 3mil(perside) Wattage 1000Watts

Pouchthickness(max) 10mil(perside) Dimensions(HxWxD) 23”x12”x6”

Estimatedheat-uptime 3minutes Netweight 33lbs

Cooldowntime 30-60minutes Laminatingcapacity Maxdocumentthickness=0.08”

Laminationspeed Variablespeed(0-37”/min) Minpouch=3mil

Numberofrollers 6 (totalthickness=2x3=6mil)

Readyindication Light Maxpouch=20mil

Reversefunction Yes (totalthickness=2x10=20mil)

Softtouchbuttons+beep Yes

LEDinterface Yes

Photocapable Yes

Carrier-free Yes

Externalcoolingplate Yes

Letourexpertshelpyouwithasolution.

CustomerService...

www.fellowes.com

AlwayscallFellowesbeforecontactingyourplaceofpurchase,seetherear

coverforcontactdetails.

NEED HELP?

ENGLISH

Illuminated user interface

Pouch / document entry

Main fuse location (at rear next to power inlet)

Pouch / document exit

Cooling system vents

On/off switch (at rear)

LAMINATOR CONTROLS

COLD

HOT

STOP

REV

PREHT

MOUNT

MEAS

CARRI

TEMPERATURE

SPEED / MOTOR

UPDN

SPEEDTEMPERATURE

°C

DISPLAY

CARRI

MOUNT

HOT

MEAS

PREHT

COLD

READY

LED & Status Display

Temperature Adjustment

& Function Controls

Speed & Motor Controls

LED & STATUS DISPLAY

Select“UP”or“DOWN”controlstoadjustthe

rollerlaminatingtemperature.

Manuallyadjusttherollertemperaturesto

suitthethicknessoflaminatingstock.

Selectfunctiontolaminatewith‘MOUNTBOARD’.

Afunctionforlaminatinghardboardmorethan1mm

thickness.Thefunctionselectstemperature130°cand

motorspeed“1”.

Selectfunctionto‘MEASURE’theactual

temperatureofrollers.

Thebuttoncanbepressedanytimeforanim-

mediatereadoutinthetemperaturedisplay.

Selectfunctionfor‘COLD’orno-heatlamination.

Coldlaminationautomaticallyselectstemperatureand

motorspeedof“0”.Ifrollertemperatureisabove60°c,

motorspeedof“2”willoperateuntilrollershavecooled

safely.Thisactionwillpreventheatdamagetothe

rollers.

Selectfunctionforlaminatingwith‘CARRIER’.

Thefunctionforlaminatingpoucheswith

Carriers.Thefunctionselects100°candmotor

speed“2”.

Selectfunctionfor‘PRE-HEAT’.

Pre-Heatcanbeselectedasa‘Stand-By’functionideal

forextendedperiodsofuse.Thefunctionoperatesat

80°candmotorspeed“2”,untilanotherfunctionis

selected.

Selectfunctionfor‘HOT’lamination.Hotlaminationfornormalhotpouchfilms.For3milpouch,themachinewillselect

temperatureof90°candmotorspeedof“5”.Thisisidealfor20lbcopypaperand3milpouch.Forthickerpouches,selectthe

correspondingenginespeedfollowedbytemperatureadjustment.Adjustmenttotemperatureusing“UP”and“DN”buttonsto

suitthethicknessofpaperasrequired.

EG:

10Mil=motorspeed2

7Mil=motorspeed3

5Mil=motorspeed5

3Mil=motorspeed5

Indicatesrollertemperature(pre-setandactual).

“READY”LEDswitchestoshowtherollertemperatureis

readytolaminate.

Indicatesrunningspeedoftherollers.

FunctionLEDdisplaysshowingtheselectedfunctionin

operation.

TEMPERATURE ADJUSTMENT & FUNCTION CONTROLS

SPEED & MOTOR CONTROLS

“STOP”function.

Pressandholdtostoptherollersrunning.Do

notuseforlongperiodsespeciallywhenthe

rollertemperatureisabove90°c.

“Reverse”function.

Pressandholdtoreversetherollers.Thiswillhelp

removemis-fedpouches.

Selectthemotorspeedtosuitthechosenpouchthickness.Thenadjusttemperaturetosuitpaperthicknessifrequired.

EG:

motorspeed1=mountingboard

motorspeed2=10mil(250micron&carriers)

motorspeed3=10,7mil(200,175,150micron)

motorspeed5=5,4,3,mil(125,100,80micron)

Switchthepoweron(locatedattherearofthemachine).Coldlamina-

tionisthedefaultfunctionsettingwhenpowerisswitchedon.

Selectthe“HOT”function.Thetemperaturewillautomaticallyselect

90°c.Therollerswillstartturningwhenthetemperatureisabove60°c.

When“READY”lampison,themachineisreadytostartlaminating.

Selectthemotorspeedbestsuitedtothepouchthickness(seegraphon

machine)EG:3milpouch=motorspeed5/90°c.Themachinewill

automaticallyselecttheoptimumlaminatingtemperature.Laminating

temperaturescanalsobeadjustedmanuallyasrequired.

Ensurethemachineisonastablesurface.

Checkthereisenoughclearspace(min20”)behindthemachineto

allowitemstopassthroughfreely.

Selectthecorrectpowerleadfortheappropriatepowersupply.Fitthe

leadtothemachine(thesocketisattherearofthemachine).

Plugthemachineintoaneasilyaccessiblemainsocket.Switchthe

mainsupplyon.

Ensurethe‘CoolingPlate’isfittedcorrectlywiththegraphics“Top

Side”visible.

Coldlaminationisthedefaultfunctionsettingwhenpowerisswitchedon.Coldlaminationcanonlyoperatewhentherollersrunatatemperaturebelow

30°c.Pressthe“MEAS”buttontomeasuretherollertemperature.

BEFORE LAMINATING

STEPS TO COLD LAMINATE

Switchoffthemachineatthewall.Allowthemachinetocool.Theoutsideofthemachinecanbecleanedwithadampcloth.Donotusesolventsorflammable

materialstopolishthemachine.Cleaningsheetscanbeusedwiththemachine.Whenthemachineiswarm–runthesheetsthroughthemachinetocleanany

residueofftherollers.Foroptimumperformance,itisrecommendedthatcleaningsheetsareusedwiththemachineregularly.

STORAGE & CLEANING

Switchthepoweron(locatedattherearofthemachine).

Selectthe“COLD”function.Waitforrollertemperaturetofallbelow

30°c.

When“COLD”&“READY”lampison,selectspeed2or3andlaminate

coldpouches.

Topreservetherollers,donotswitchoffthemachinewhenitishot.

STEPS TO HOT LAMINATE

Select“COLD”function.Themachinewillsettemperatureat0°cand

motorspeedat“2”.Whentherollertemperaturehascooledtobelow

60°c,therollerswillstopautomatically.

Switchoffthepowerusingtheswitchatthebackofthemachine.

Unplugthepowercord.

STEPS TO SWITCH OFF THE MACHINE

REPLACING THE FUSE

Thismachineisfittedwithafuse,locatedbetweenthemainswitchandthemainsocketontherearofthe

machine.Toreplacethefuse:

• Isolatethemachinefromthemainsupply.

• Openthefuseholderwithascrewdriverblade.

• Insertanewfuseintheholderandreplacetheholderintothemachine.

Note:Alwaysusetherecommendedfuse(5Amps)andDONOTreplaceitwithoneofadifferentrating.

THERMAL RE-SET

Themachineissuppliedwithathermalre-setswitch.Theswitchwillactivate

whenthemachinebecomestoohot.Thisconditionshouldnotoccurduring

normaluse.Tore-settheswitch:

• Isolatethemachinefromthemainsupply.

• Safelysupportthemachine-toaccesstheunderside.

• Usingacross-headscrewdriver,openthecoverplate.

• Usingasuitabletool,insertthetoolthroughtheapertureandpressthe

metalswitchuntilitsnapsclosed.Theswitchwillclosecorrectly,onlyifthe

machineiscoolenough.

• Replacethecoverplateandscrews.

• Power-onthemachine.

TROUBLESHOOTING

Problem Possible cause Solution

NopoweronLED Machineisnotswitchedon Switchonmachineatrearnexttopluginletandatthewallsocket

Readylightdoesnotcomeonaftera

longperiod

Machineisinahotorhumidarea Movethemachinetoacooleranddryarea

Pouchdoesnotcompletelysealtheitem

Itemmaybetoothicktolaminate Passthroughthemachineagain

Temperaturesettingmaybeincorrect Checkpouchthicknessiscorrectlyselectedandpassthroughagain

Pouchhaswavesorbubbles Temperaturesettingmaybeincorrect Checkpouchthicknessiscorrectlyselectedandpassthroughagain

Pouchislostinthemachine Pouchisjammed

Selectreversebuttonandpullouttheitembyhand.Checkcooling

plateiscorrectlypositioned.

Jamming

Pouchwasused‘openend’first

Pouchwasnotcenteredonentry

Pouchwasnotstraightuponentry

Emptypouchwasused

Coolingplatenotfixedcorrectly

Pouchisdamagedafterlamination Damagedrollersoradhesiveonrollers Passcleaningsheetsthroughthemachinetotestandcleanrollers

Temperaturenotincreasing

Mainfusefailure

Checkandreplace

Powercordnotfittedcorrectly

Curledorburntlaminations Toohot Reducetemperatureorincreasespeed

Softorpoorlamination Toocold Increasetemperatureorreducespeed

Rollersnotrunning

ollerstoocold(<60°c) Waitforrollerstowarm-up

"STOP"buttonmaybepressed Press"MOTOR"or"SPEED"button

Unstablelaminationtemperature Rollerelectricbrushmaybebroken

Contactserviceengineer

CannotselectanyMode Circuitboarderror

Rollersnotrunning&motorisrunning Loosecircuitboltsongear

Excessivenoise Gearswordordamaged

Masterfusekeepsfailing Damagedcircuitboard

Page is loading ...

CONVERSIONS DE TEMPÉRATURE

Celsius Fahrenheit Celsius Fahrenheit

21 70 66 151

22 72 67 153

23 73 68 154

24 75 69 156

25 77 70 158

26 79 71 160

27 81 72 162

28 82 73 163

29 84 74 165

30 86 75 167

31 88 76 169

32 90 77 171

33 91 78 172

34 93 79 174

35 95 80 176

36 97 81 178

37 99 82 180

38 100 83 181

39 102 84 183

40 104 85 185

41 106 86 187

42 108 87 189

43 109 88 190

44 111 89 192

45 113 90 194

46 115 91 196

47 117 92 198

48 118 93 199

49 120 94 201

50 122 95 203

51 124 96 205

52 126 97 207

53 127 98 208

54 129 99 210

55 131 100 212

56 133 101 214

57 135 102 216

58 136 103 217

59 138 104 219

60 140 105 221

61 142 106 223

62 144 107 225

63 145 108 226

64 147 109 228

65 149 110 230

Page is loading ...

CONVERSIONES DE TEMPERATURA

Celsius Fahrenheit Celsius Fahrenheit

21 70 66 151

22 72 67 153

23 73 68 154

24 75 69 156

25 77 70 158

26 79 71 160

27 81 72 162

28 82 73 163

29 84 74 165

30 86 75 167

31 88 76 169

32 90 77 171

33 91 78 172

34 93 79 174

35 95 80 176

36 97 81 178

37 99 82 180

38 100 83 181

39 102 84 183

40 104 85 185

41 106 86 187

42 108 87 189

43 109 88 190

44 111 89 192

45 113 90 194

46 115 91 196

47 117 92 198

48 118 93 199

49 120 94 201

50 122 95 203

51 124 96 205

52 126 97 207

53 127 98 208

54 129 99 210

55 131 100 212

56 133 101 214

57 135 102 216

58 136 103 217

59 138 104 219

60 140 105 221

61 142 106 223

62 144 107 225

63 145 108 226

64 147 109 228

65 149 110 230

Page is loading ...

fellowes.com

1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600

Australia China France Korea Singapore

Benelux Deutschland Italia Polska United Kingdom

Canada España Japan Russia United States

Heavy Duty Laminator

Fellowes

Australia +61-3-8336-9700

Benelux +31-(0)-76-523-2090

Canada +1-905-475-6320

Deutschland +49-(0)-5131-49770

España / Portugal + 34 902 33 55 69

France +33-(0)-1-78-64-91-00

Italia +39-71-730041

Japan +81-(0)-3-5496-2401

Korea +82-(0)-2-3462-2844

Malaysia +60-(0)-35122-1231

Polska +48-(22)-205-2100

Russia +7-(495)-228-14-03

Singapore +65-6221-3811

United Kingdom +44-(0)-1302-836836

United States +1-630-893-1600

2011 Fellowes, Inc. Part No. 405605

FCCCLASSBNOTICE

Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimits

aredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradi-

ateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.

However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor

televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormore

ofthefollowingmeasures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

CANADACLASSBNOTICE-AVISCANADA,CLASSEB

ThisClassBdigitalapparatuscomplieswithCanadianICES-003.

Cet

appareilnumériquedelaclasseBestconformeàlanormeNMB-003duCanada.

MODIFICATIONS

AnymodificationsmadetothisdevicethatarenotapprovedbyFellowesmayvoidtheauthoritygrantedtotheuserbytheFCCand/orbyIndustryCanada

tooperatethisequipment.

ToutesmodificationsapportéesàcedispositifetnonapprouvéesparFellowesannulerontledroitaccordéàl’utilisateurparleFCCet/ouparIndustrie

Canadadefairefonctionnercetéquipement.