Electrolux EHT 60418 Operating instructions

Gas hob

EHT 70838

operating instructions

IL

Page is loading ...

electrolux 3

Welcome to the world of Electrolux

Thank you for choosing a first class product from Electrolux, which hopefully will

provide you with lots of pleasure in the future.

The Electrolux ambition is to offer a wide variety of quality products that make

your life more comfortable.

You find some examples on the cover in this manual. Please take a few minutes

to study this manual so that you can take advantage of the benefits of your new

machine.

We promise that it will provide a superior User Experience delivering Ease-of-

Mind.

Good luck!

4 electrolux

This appliance is manufactured according to the following EEC directives:

2006/95 EEC - 2004/108 EEC - 90/396 EEC,

current edition.

Guide to Use the instructions

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental Information

)

Contents

Instructions for the User

Important Safety Information 5

Description of the Hob 7

Operation 8

Maintenance and Cleaning 10

Something Not Working? 12

Service and original spare parts 22

Instructions for the Installer

Engineers Technical Data 13

Gas Connection 16

Electrical Connection 17

Adaptation to different Types of Gas 18

Building In 19

Possibilities for Insertion 21

MANUFACTURER:

ELECTROLUX ITALIA S.p.A.

C.so Lino Zanussi, 30 – 33080 Porcia - PN (ITALY)

electrolux 5

During Operation

• This appliance has been designed for non professional purpose in private houses only. It is meant

to cook edible foodstuff only and MUST NOT be used for any other purposes.

• It is dangerous to alter the specification in any way.

• For hygiene and safety reasons, this appliance should be kept clean at all times. A build-up of fats

or other foodstuff could result in a fire.

• Do not use this hob if it is in contact with water. Do not operate the hob with wet hands.

• Never leave the hob unattended when cooking with oil and fats.

• Unstable or misshapen pans should not be used on the hob as unstable pans can cause an accident

by tipping or spillage.

• Never use plastic or aluminium foil dishes on the hob.

• Perishable food, plastic items and areosols may be affected by heat and should not be stored above

or below the hob unit.

• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by

unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service

Centre. Always insist on genuine spare parts.

• Ensure that all control knobs are in the OFF position when not in use.

• Should you connect any electrical tool to a plug near this cooking appliance, ensure that electric cables

are not in contact with it and keep them far enough from the heated parts of this appliance.

• If the appliance is out of order, disconnect it from the electric supply.

People Safety

• This appliance is not intended for use by children or other persons whose physical, sensory or mental

capabilities or lack of experience and knowledge prevents them from using the appliance safely

without supervision or instruction by a responsible person to ensure that they can use the appliance

safely.

• This appliance has been designed to be operated by adults and children under supervision. Young

children MUST NOT be allowed to tamper with the controls or play near or with the oven.

These warnings are provided in the interest of safety. You must read them carefully before

installing or using the appliance.

It is most important that this instruction book should be retained with the appliance for future

reference. Should the appliance be sold or transferred, always ensure that the book is left

with the appliance in order that the new owner can get to know the functions of the appliance

and the relevant warnings.

These instructions are only valid for countries whose identification symbols are shown on

the cover of this instruction booklet and on the appliance itself.

Important Safety Information

ENGLISH

6 electrolux

• Accessible parts of this appliance may become hot when it is in use. Children should be KEPT AWAY

until it has cooled.

• The residual heat indicator comes on when the cooking zone is switched on. Children should be

kept away until it switches off.

• Children can also injure themselves by pulling pans or pots off the hob.

About Installation, Cleaning and Manteinance

• It is mandatory that all operations required for the installation are carried out by a qualified or competent

person, in accordance with existing rules and regulations in force in the country where the appliance

is used.

• Ensure a good ventilation around the appliance. A poor air supply could cause lack of oxygen.

• Ensure that the gas and electrical supply complies with the type stated on the identification label, placed

near the gas supply pipe.

• This appliance is not connected to a combustion products evacuation device. It must be installed and

connected in accordance with current installation regulations. Particular attention shall be given to the

relevant requirements regarding ventilation.

• The use of a gas cooking appliance results in the production of heat and moisture in the

room in which it is installed. Ensure that the kitchen is well ventilated: keep natural

ventilation holes open or install a mechanical ventilation device (mechanical extractor

hood).

• Prolonged intensive use of the appliance may call for additional ventilation, for example

opening of a window, or more effective ventilation, for example increasing the level of

mechanical ventilation where present.

• Once you removed all packaging from the appliance, ensure that it is not damaged and the electric

cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation.

• Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance

work.

• This appliance cannot be cleaned with steam or with a steam cleaning machine.

• Never use the hob as a working space. Do not store things on the hob.

• Never use plastic or aluminium foil dishes on the glass hob, as they could melt on the hob, thus

damaging it. Anyway,If anything of this nature accidentally comes into contact with the glass surface

it must be scraped off immediately while stlll hot and wiped away to avoid damage to the surface. In

the same way, remove sugar or food residues with hich sugar content, which may have split from

saucepans by using a scraper for glass hobs.

• Unstable or misshapen pans should not be used on the hob as unstable pans can cause an accident

by tipping or spillage.

• The glass hob is shockproof, but not unbreakable! Hard or pointed objects falling from a height can

damage the hob. If scratches or cracks are noticed, disconnect the appliance from the electrical

supply to avoid the risk of electric shock and call you nearest Service Force Centre.

Never use scratching sponges, abrasive products or chemically powerful detergents. Use only

cleaning agents specific for glass hobs.

• The manufacturer disclaims any responsability should all the safety measures not be

carried out.

electrolux 7

Description of the Hob

Service

• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by

unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service

Centre. Always insist on genuine spare parts.

Environmental Information

• After installation, please dispose of the packaging with due regard to safety and the environment.

• When disposing of an old appliance, make it unusable, by cutting off the cable.

• The symbol on the product or on its packaging indicates that this product may not be treated

as household waste. Instead it shall be handed over to the applicable collection point for the recycling

of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product. For more detailed information

about recycling of this product, please contact your local city office, your household waste disposal

service or the shop where you purchased the product.

1. Hob Top

2. Semi-rapid Burner

3. Triple Crown Burner

4. Auxiliary Burner

5. Control knobs for burners

2

3

1

2

4

5

8 electrolux

Hob Burners

To light a burner:

z Turn the relevant knob anticlockwise to

maximum position and push down the knob to

ignite.

z After lighting the flame, keep the knob pushed

down for about 5 seconds. This will allow the

"thermocouple" (Fig. 1 - lett. D) to be heated

and the safety device to be switched off,

otherwise the gas supply would be interrupted.

Then, check the flame is regular and adjust it

as required.

If you cannot light the flame even after several

attempts, check the "cap" (Fig. 1 - lett. A) and

“crown” (Fig. 1 - lett. B) are in the correct position.

To put the flame out, turn the knob to the symbol

.

In the absence of electricity, ignition can occur

without the electrical device; in this case approach

the burner with a flame, push the relevant knob

Operation

INSTALLATION

Any gas installation must be carried out by qualified personnel, and in

accordance with existing rules and regulations.

The relevant instructions are to be found in the second section of this manual.

Please, ensure that, once the hob is installed, it is easily accessible for the

engineer in the event of a breakdown.

The manufacturer will not accept liability, should the above instructions or any

of the other safety instructions incorporated in this book be ignored.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important

to remove any protective materials, which were

put on in the factory.

The symbols mean:

= no gas supply

= maximum gas supply

= minimum gas supply

)

A - Burner cap C - Ignition candle

B - Burner crown D - Thermocouple

Triple crown burner

A

B

D

C

A

D

B

C

Fig. 1

electrolux 9

Burner minimum maximum

diameter diameter

Large (triple crown) 180 mm 260 mm

Medium (semi-rapid) 120 mm 220 mm

Small (auxiliary) 80 mm 160 mm

As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid

simmering.

Use only pans or pots with flat bottom.

If you use a saucepan which is smaller than the recommended size, the flame will

spread beyond the bottom of the vessel, causing the handle to overheat.

Carefully supervise cooking with fat or oil, since these types of foodstuff can result in a fire,

if over-heated.

Prolonged cooking with potstones, earthenware pans or cast-iron plates is

inadvisable. Also, do not use aluminium foil to protect the top during use.

Make sure pots do not protrude over the edges of the cooktop and that

they are centrally positioned on the rings in order to obtain lower gas

consumption.

Do not place unstable or deformed pots on the rings: they could tip

over or spill their contents, causing accidents.

Pots must not enter the control zone.

If the control knobs become difficult to turn, please contact your local Service

Force Centre.

down and turn it anti-clockwise until it reaches the"maximum" position.

When switching on the mains, after installation or a power cut, it is quite normal

for the spark generator to be activated automatically.

Do not keep the control knob pressed for more than 15 seconds.

If the burner does not light even after 15 seconds, release the control knob, turn it the

"off" position and wait for at least one minute before trying to light the burner again.

If the burner accidentally goes out, turn the control knob to the "off" position and wait

for at least 1 minute before trying to light the burner again.

Using the hob correctly

To ensure maximum burner efficiency, it is strongly recommended that you use only pots

and pans with a flat bottom fitting the size of the burner used, so that flame will not spread

beyond the bottom of the vessel (see the table beside).

10 electrolux

Before any maintenance or cleaning can be carried out, you must DISCONNECT

the hob from the electricity supply.

The hob is best cleaned whilst it is still warm, as spillage can be removed more

easily than if it is left to cool.

This appliance cannot be cleaned with steam or with a steam cleaning machine.

The pan supports

To ensure a better cleaning, pan supports can be removed from the hob.

The pan supports are not dishwasher proof; they must be washed by hand. Take care when

drying them as the enamelling process occasionally leaves rough edges. If necessary, remove

stubborn stains using a paste cleaner.

After cleaning, make sure that the pan supports are correctly positioned.

Pay attention when placing the pan supports back on their position, in order to

avoid scratching the glass hob top.

When refitting the grate of the triple crown burner, make sure to match the hollow part of the grate

with the reference located on the plate fixed to the glass.

The hob top

Regularly wipe over the hob top using a soft clothwell wrung out in warm water to which

a little wasingup liquid has been added.

Avoid the use of thefollowing:

- household detergent and bleaches;

- impregnated pads unsuitable for non-sticksaucepans;

- steel wool pads;

- bath/sink stain removers.

If scratches or cracks are noticed, disconnect the appliance from the

electrical supply to avoid the risk of electric shock and call your nearest

Service Force Centre.

Keep all objects and materials which can melt away from the cooking surface,

e.g. plastics, aluminium foil.

Maintenance and Cleaning

electrolux 11

The burners

The burner caps and crowns can be removed for cleaning.

Wash them using hot soapy water, and remove marks with a mild paste cleaner. A well

moistened soap impregnated steel wool pad can be used with caution, if the marks are

particularly difficult to remove.

After cleaning, be sure to wipe dry with a soft cloth.

Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking

away any built-up of food.

Ignition electrode

The electric ignition is obtained through a ceramic "electrode" and a metal electrode

(Fig. 1 - letter C). Keep these components well clean, to avoid difficult lighting, and

check that the burner crown holes are not obstructed.

Periodic maintenance

Periodically ask your local Service Centre to check the conditions of the gas supply pipe

and the pressure adjuster, if fitted.

12 electrolux

Something Not Working?

If the hob is not working correctly, please carry out the following checks before contacting

your local Electrolux Service Force Centre.

SYMPTOM

 There is no spark when lighting the

gas.

 The gas ring burns unevenly.

SOLUTION

 Check that the unit is plugged in and

the electrical supply is switched on.

 Check that the general safety switch

has not tripped (if fitted).

 Check the burner cap and crown

have been replaced correctly, e.g.

after cleaning.

 Check the main jet is not blocked and

the burner crown is clear of food

particles.

 Check the burner cap and crown

have been replaced correctly, e.g.

after cleaning.

electrolux 13

OVERALL DIMENSIONS Width: 680 mm

Depth: 510 mm

CUT OUT DIMENSIONS Width: 560 mm

Depth: 480 mm

APPLIANCE CLASS 3

SUPPLY CONNECTIONS Gas:

RC 1/2 inch (1/2 inch male) Rear right hand corner

Electric:

230 V

~ 50 Hz supply, 3 core flexible cable with non

rewireable plug.

HEAT INPUT

Triple crown Burner 3.5 kW

Semi-Rapid Burner 1.6 kW

Auxiliary Burner 0.95 kW

APPLIANCE CATEGORY I3

GAS SUPPLY LPG 30 mbar (1 mbar = 10 mm water coloumn)

Engineer technical data

14 electrolux

Table 2 : Injectors

Table 1 : By-pass diameters

Burner Ø By-pass in 1/100 mm.

Auxiliary 28

Semi-rapid 35

Triple Crown 56

NOMINAL POWER LPG (Butane “A”) FEEDING

PRESSURE

BURNER kW kCal/h nozzle g/h

mbar

Auxiliary

burner 0,95 813 50 75

Semi-rapid

burner 1,6 1369 066 126 30

Triple Crown

burner

3,5 2994 98 276

electrolux 15

z The following instructions about installation and maintenance must be carried out

by qualified personnel in compliance with the regulation in force.

z The appliance must be electrically disconnected before all interventions. If any

electric supply to the appliance is required to carry out the work, ensure all the

necessary precautions are followed.

z The side walls of the unit in which the hob is going to be installed, must not exceed

the height of the working top.

z Avoid installing the appliance in the proximity of inflammable materials (e.g. curtains,

tea towels etc.).

THE MANUFACTURER WILL NOT ACCEPT LIABILITY, SHOULD ANY OF THE OTHER

SAFETY INSTRUCTIONS INCORPORATED IN THIS BOOKLET OR THE REGULATION IN

FORCE BE IGNORED.

Instruction for the Installer

16 electrolux

Connection using flexible non metal pipes

When the connection can be easily inspected in its full extent, there is the chance to use a flexible pipe

according to the rules in force. The flexible pipe must be tightly fixed using clamps according to the rules

in force.

Use the rubber pipe holder «D». Always insert the gasket «B» (Fig.2). Then proceed with the gas

connection. The flexible pipe should be made ready for use in such a way that:

- nowhere it can reach overtemperature, other than room

temperature, higher than 30°C;

- it is no longer than 1500 mm;

- it shows no throttles;

- it is not subject to traction or torsion;

- it doesn't get in touch with cutting edges or corners;

-it can be easily inspected in order to check its condition.

The control of preservation of the flexible pipe consistsin

checking that:

- it doesn't show cracks, cuts, marks of burnings bothon

the end parts and on its full extent;

- the material is not hardened, but shows its normal

elasticity;

- the fastening clamps are not rusted;

- expiry term is not due.

If one or more abnormalities are seen, do not repair the

pipe, but replace it.

Fig. 2

A) Ramp with ending nut

B) Seal

C) Adjustable connection

D) Rubber pipe holder for liquid gas

D

Gas Connection

Choose fixed connections or use a flexible pipe instainless steel in compliance with the regulation in

force. If using flexible metallic pipes, be careful they do not come in contact with mobile parts or they are

not squeezed. Use the same attention when the hob is combinated with an oven.

IMPORTANT - To ensure a correct operation, a saving of energy and the long life of the appliance,

the voltage pressure of the appliance must correspond to the recommended values.

The adjustable connection has to be fixed to the comprehensive ramp by means of a threaded nut G

1/2".

Interpose the sealing between the components as shown in Fig. 2.

Screw the parts without forcing, adjust the connection in the required direction and tighten everything.

electrolux 17

Any electrical work required to install this appliance should be carried out by a

qualified electrician or competent person, in accordance with the current regulations.

THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This appliance is designed to be connected to a 230 V 50Hz AC electrical supply.

Before the appliance is connected:

1) check that the main fuse and the domestic installation can support the load (see the rating label);

2) check that the power supply is properly earthed in compliance with the current rules;

3) check the socket or the double pole switch used for the electrical connection can be easily reached

with the appliance built in the forniture unit. Before switching on, make sure the electricity supply

voltage is the same as that indicated on the appliance rating plate. The rating plate is located on the

bottom of the hob. A copy is attached on the back cover of this book.

The appliance is supplied with a 3 core flexible supply cord incorporating a plug. Connect the plug to an

adequate socket.

Permanent connection

In the case of a permanent connection, it is necessary that you install a double pole switch between the

appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts

and of a type suitable for the required load in compliance with the current electric regulations.

The switch must not break the yellow and green earth cable at any point.

Ensure that the hob supply cord does not come into contact with surfaces with

temperatures higher than 50 deg. C.

Electrical Connection

It is important to install the elbow correctly, with the shoulder on the end of the thread, fitted to the

hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

IMPORTANT

Once installation is complete, check the perfectseal of every pipe fitting, using a soapy solution,

never a flame.

18 electrolux

Commissioning

By pass screw

When the hob has been fully installed it will be necessary to check the minimum flame setting.

To do this, follow the procedure below.

- Turn the gas tap to the MAX position and ignite.

- Set the gas tap to the MIN flame position then turn

the control knob from MIN to MAX several times.

If the flame is unstable or is extinguished follow

the procedure below.

Procedure:

Re-ignite the burner and set to MIN.

Remove the control knob, insert a thin

bladed screwdriver down the centre of

the gas tap control shaft and turn the adjustment screw until the flame is steady and does not

extinguish, when the knob is turned from MIN to MAX.

Repeat this procedure for all burners.

)

electrolux 19

Building In

A = Auxiliary burner

SR = Semi-rapid burner

TC = Triple crown burner

Dimensions are given in millimeters

The hob can be inserted in a built-in kitchen unit

whose depth is between 550 mm and 600 mm.

The hobs dimensions are shown in Fig. 3.

The edge of the cut out must have a minimum

distance from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit

near the hob, the cut out edges must have a

minimum distance of 450 mm.

Hanging forniture units or hoods must be placed

at 650 mm minimum from the hob.

Fig. 4

Fig. 3

SR

A

TC

680

510

20 electrolux

Fitting the hob to the worktop

Before fitting the hob into the cut out, an adhesive

seal must be fitted to the underside outside edge

of the hob. It is essential that no gaps are left in this

seal in order to prevent spillage near the hob

seeping into the cabinet below.

1) Remove the pan supports, the burners caps

and crowns and turn the hob upside down,

taking care the ignition candles are not

damaged in this operation.

2) Place the relevant sealing all around the glass

top edge, taking care that the sealings meet

without overlapping (Fig. 5).

3) Place the hob in the cut out, taking care of its

centring.

4) Fix the hob with the supplied fixing clamps

(Fig. 6).

A) Sealing gasket

Fig. 5

Fig. 6

A

electrolux 21

Possibilities for Insertion

Kitchen unit with door

Proper arrangements must be taken in designing the

forniture unit, in order to avoid any contact with the bottom

of the hob which can be heated when it is operated. The

recommended solution is shown in Fig. 7. The panel

fitted under the hob should be easily removable to allow

an easy access if a technical assistance intervention is

needed.

Kitchen unit with oven

The hob recess dimensions must comply the indication

given in Fig. 4 and must be provided with brackets to

allow a continuous supply of air.

To avoid overhating, the building in should be carried

out as shown in Figs. 8 and 9.

The hob's electric connection and the oven's one must

be carried out separately, both for safety reasons and to

allow the oven to be easily taken off the unit.

Fig. 9

Fig. 8

FO 0938 FO 0939

a) Removable panel

b) Space possibly useful

for connections

Fig. 7

Page is loading ...

Electrolux EHT 60418 Operating instructions

This manual is also suitable for

Electrolux EHT 60418 Operating instructions

Related papers

Other documents